Posts by Francopacks

    Yes, you are correct, this board has one of each. I had to install the e1000e drivers to get the NICs to work after initial installation.


    Code
    dpkg -i e1000e-2.6.32-5_2.3.2_amd64.deb


    The last OS on the machine was a variation of CentOS. Both NICs worked in gigabit mode. I have had a few others on there over the years and have never had an issue with the gigabit NICs.


    The board is a Super Micro PDSM4+
    http://www.supermicro.com/prod…/xeon3000/3010/pdsm4_.cfm

    After the 3.2 backports kernel install I did a reboot of the server. It came up with eth0 at 100 again, so I switched it to 1000 and once again it switched itself back to 100 after a few seconds.


    I figured I should check that it's actually using the 3.2 kernel and it doesn't look like system is using the 3.2 kernel even though the install looked successful.


    Code
    root@openmediavault:~# uname -mrs
    Linux 2.6.32-5-amd64 x86_64
    root@openmediavault:~# cat /proc/version
    Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze3) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri May 10 08:43:19 UTC 2013
    root@openmediavault:~#

    It doesn't look like they install/upgrade anything.



    Still the same errors in the GUI on the plugins tab.

    The initial error from the Plugins tab appears right after clicking the Plugins tab button. If I click OK through the message I can then click the uploads button to upload the openmediavault-omvextrasorg_0.5.38_all.deb plugin.


    After selecting the file and uploading, I get the error below (same?):


    Code
    Failed to execute command 'export LANG=C; apt-get --simulate --reinstall install openmediavault-clamav 2>&1': Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openmediavault-clamav : Depends: clamav-daemon but it is not installable Depends: clamav-freshclam but it is not installable E: Broken packages


    Code
    Error #4000: exception 'OMVException' with message 'Failed to execute command 'export LANG=C; apt-get --simulate --reinstall install openmediavault-clamav 2>&1': Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openmediavault-clamav : Depends: clamav-daemon but it is not installable Depends: clamav-freshclam but it is not installable E: Broken packages' in /usr/share/openmediavault/engined/rpc/pluginmgmt.inc:139 Stack trace: #0 [internal function]: OMVRpcServicePluginMgmt->enumeratePlugins(NULL, Array) #1 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #2 /usr/share/openmediavault/engined/rpc/pluginmgmt.inc(225): OMVRpcServiceAbstract->callMethod('enumeratePlugin...', NULL, Array) #3 [internal function]: OMVRpcServicePluginMgmt->getList(Array, Array) #4 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #5 /usr/share/php/openmediavault/rpc.inc(62): OMVRpcServiceAbstract->callMethod('getList', Array, Array) #6 /usr/sbin/omv-engined(495): OMVRpc::exec('Plugin', 'getList', Array, Array, 1) #7 {main}

    No, I havn't added any repos. Apt-get update didn't return any errors.


    Clicking on the plugin tab gives the error below:


    Code
    Failed to execute command 'export LANG=C; apt-get --simulate --reinstall install openmediavault-clamav 2>&1': Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openmediavault-clamav : Depends: clamav-daemon but it is not installable Depends: clamav-freshclam but it is not installable E: Broken packages


    Code
    Error #4000: exception 'OMVException' with message 'Failed to execute command 'export LANG=C; apt-get --simulate --reinstall install openmediavault-clamav 2>&1': Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openmediavault-clamav : Depends: clamav-daemon but it is not installable Depends: clamav-freshclam but it is not installable E: Broken packages' in /usr/share/openmediavault/engined/rpc/pluginmgmt.inc:139 Stack trace: #0 [internal function]: OMVRpcServicePluginMgmt->enumeratePlugins(NULL, Array) #1 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #2 /usr/share/openmediavault/engined/rpc/pluginmgmt.inc(225): OMVRpcServiceAbstract->callMethod('enumeratePlugin...', NULL, Array) #3 [internal function]: OMVRpcServicePluginMgmt->getList(Array, Array) #4 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #5 /usr/share/php/openmediavault/rpc.inc(62): OMVRpcServiceAbstract->callMethod('getList', Array, Array) #6 /usr/sbin/omv-engined(495): OMVRpc::exec('Plugin', 'getList', Array, Array, 1) #7 {main}


    That's an interesting result.

    I tried the can of air in the bad port with no result. It looks clean in there. I might try some rubbing alchohol the next time I have it down for awhile.


    I'm using the Intel e1000e-2.6.32-5_2.3.2_amd64 driver for both NICs.


    They are both Cat6 cables. I swapped the naughty one out with another Cat6, same issue. Both NICs are plugged into the same gigabit switch, a Trendnet 8 port. I tried different ports on the switch with the same results, eth0 goes back to 100. I tried a different switch, this on a Netgear 4 port gigabit switch, same result.


    When I switch eth0 to 1000, it stays for about 20 seconds then changes back. I'm changing it in the CLI using the command below:


    Code
    ethtool -s eth0 speed 1000 duplex full

    I have a SuperMicro motherboard that includes 2x Intel 82573V Gigabit Ethernet Controllers. Eth1 keeps it's DHCP and speed settings (1000 duplex full), however eth0 keeps changing back to 100 duplex full. I've tried running the OMV-firstaid command a few times to re-setup the NIC, but to no avail. How can I force the NIC to keep the 1000 setting?