Posts by oxidizer

    During the start of OMV you can see the boot output in the console. But after that there is a "clear"-command or something like that and you can`t see anything of the boot output. is there a way to comment the "clear"-command? in which file I have to look?

    What is the best way to install Windws 10 beside OMV on the same HDD, because OMV take the whole HDD/SSD? May be:


    1. install OMV
    2. resize Partition
    3. install Win10
    4. reinstall grub


    ?
    But what are the best settings in the bios? I have a ASUS H170M-Plus MB.


    Thanks

    I use a cubietruck with OMV and use syncthing to sync a folder with a HP N40L with OMV too. The performance on the cubietruck is very bad. Transfer rate is around 8Mbit and cpu workload is 100%. Does anyone have the same experience.

    Performance ist ein weiter Begriff. Die WebGui läuft genauso gut wie auf meinem N40L-Server. Ein kurzer Test zeigt, dass die Übertragungsrate mit dem Apple Filling Protokoll über das cubietruck mit angeschlossener USB Festplatte zw. 20 und 25Mbyte liegt. Ich find das gut.


    Eine Kleinigkeit hab ich jetzt festgestellt: ownCloud funktioniert nicht richtig und Java für jDownloader kann nicht installiert werden. Ist das gleiche Lied wie am Anfang.


    Code
    The following packages have unmet dependencies:
    openmediavault-jdownloader : Depends: java7-runtime
    E: Unable to correct problems, you have held broken packages.


    Scheinbar ist das Java Paket auch noch nicht geupdatet.

    Is there any solution for this problem? I have the same problem. I tried 3 debian images (cubeez, igor images) for cubietruck and all debian versions (old version too) have the same problems. If I try aptitude instead of apt-get the output is:


    Eigentlich gibt dir die Fehlermeldung schon die Antwort:


    "This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming."


    das heisst, dass du eine Version verwendest, für die es noch keine neueren Pakete gibt, die du für die Installation von OMV benötigst. In diesem Fall die 3 genannten. Du hast 2 Möglichkeiten. Entweder eine älteres Igor-Image verwenden oder warten bis diese neuen Pakete erstellt und freigegeben wurden.


    Sollte ich quatsch erzählen, wäre ich für eine Korrektur dankbar.

    Is it possible and make it sense to move the Plex and owncloud folder to a SSD to improve the performance? At the moment owncloud is slowly a bit and I have problems with Plex at the start of my Server. Some times Plex dont wanted to start at the boot of my server. And when I start Plex over the webgui manually it needs a little bit. Maybe the database is to great for loading at the boot?

    Sorry for long waiting. Now your Version 0.3 works great. The output from omv-sysinfo 31-hpraid is as it should be:


    root@OMV:~# omv-sysinfo 31-hpraid
    ================================================================================
    = HP Hardware RAID
    ================================================================================


    CONTROLLER INFO:
    --------------------------------------------------------------------------------
    Smart Array P212 in Slot 1
    Bus Interface: PCI
    Slot: 1
    Serial Number: PACCPID12310L3J
    Cache Serial Number: PACCQ9SXVGJ8
    RAID 6 (ADG) Status: Disabled
    Controller Status: OK
    Hardware Revision: C
    Firmware Version: 6.40
    Rebuild Priority: Medium
    Expand Priority: Medium
    Surface Scan Delay: 15 secs
    Surface Scan Mode: Idle
    Queue Depth: Automatic
    Monitor and Performance Delay: 60 min
    Elevator Sort: Enabled
    Degraded Performance Optimization: Disabled
    Inconsistency Repair Policy: Disabled
    Wait for Cache Room: Disabled
    Surface Analysis Inconsistency Notification: Disabled
    Post Prompt Timeout: 0 secs
    Cache Board Present: True
    Cache Status: OK
    Cache Ratio: 10% Read / 90% Write
    Drive Write Cache: Enabled
    Total Cache Size: 256 MB
    Total Cache Memory Available: 144 MB
    No-Battery Write Cache: Enabled
    Cache Backup Power Source: Batteries
    Battery/Capacitor Count: 1
    Battery/Capacitor Status: OK
    SATA NCQ Supported: True


    CONTROLLER STATUS:
    --------------------------------------------------------------------------------
    Smart Array P212 in Slot 1
    Controller Status: OK
    Cache Status: OK
    Battery/Capacitor Status: OK


    LOGICAL DRIVE INFO:
    --------------------------------------------------------------------------------
    Smart Array P212 in Slot 1
    array A
    logicaldrive 1 (7.3 TB, RAID 1+0, OK)
    array B
    logicaldrive 2 (1.8 TB, RAID 1, OK)


    PHYSICAL DRIVE INFO:
    --------------------------------------------------------------------------------
    Smart Array P212 in Slot 1
    array A
    physicaldrive 1I:0:1 (port 1I:box 0:bay 1, SATA, 4000.7 GB, OK)
    physicaldrive 1I:0:2 (port 1I:box 0:bay 2, SATA, 4000.7 GB, OK)
    physicaldrive 1I:0:3 (port 1I:box 0:bay 3, SATA, 4000.7 GB, OK)
    physicaldrive 1I:0:4 (port 1I:box 0:bay 4, SATA, 4000.7 GB, OK)
    array B
    physicaldrive 2E:0:7 (port 2E:box 0:bay 7, SATA, 2 TB, OK)
    physicaldrive 2E:0:8 (port 2E:box 0:bay 8, SATA, 2 TB, OK)


    PHYSICAL DRIVE STATUS:
    --------------------------------------------------------------------------------
    physicaldrive 1I:0:1
    Status: OK
    Interface Type: SATA
    Size: 4000.7 GB
    Rotational Speed: 5400
    Firmware Revision: 80.00A80
    Serial Number: WD-WCC4E0233388
    Model: ATA WDC WD40EZRX-00S
    Current Temperature (C): 32
    Maximum Temperature (C): 39
    PHY Transfer Rate: 3.0Gbps
    physicaldrive 1I:0:2
    Status: OK
    Interface Type: SATA
    Size: 4000.7 GB
    Rotational Speed: 5400
    Firmware Revision: 80.00A80
    Serial Number: WD-WCC4E0230908
    Model: ATA WDC WD40EZRX-00S
    Current Temperature (C): 32
    Maximum Temperature (C): 37
    PHY Transfer Rate: 3.0Gbps
    physicaldrive 1I:0:3
    Status: OK
    Interface Type: SATA
    Size: 4000.7 GB
    Rotational Speed: 5400
    Firmware Revision: 82.00A82
    Serial Number: WD-WCC4EPA9UCR5
    Model: ATA WDC WD40EFRX-68W
    Current Temperature (C): 33
    Maximum Temperature (C): 38
    PHY Transfer Rate: 3.0Gbps
    physicaldrive 1I:0:4
    Status: OK
    Interface Type: SATA
    Size: 4000.7 GB
    Rotational Speed: 5400
    Firmware Revision: 80.00A80
    Serial Number: WD-WCC4E3A7ZU73
    Model: ATA WDC WD40EFRX-68W
    Current Temperature (C): 33
    Maximum Temperature (C): 37
    PHY Transfer Rate: 3.0Gbps
    physicaldrive 2E:0:7
    Status: OK
    Interface Type: SATA
    Size: 2 TB
    Rotational Speed: 5400
    Firmware Revision: 1AQ10001
    Serial Number: S2H7J90C508627
    Model: ATA ST2000DL004 HD20
    Current Temperature (C): 30
    Maximum Temperature (C): 58
    PHY Transfer Rate: 3.0Gbps
    physicaldrive 2E:0:8
    Status: OK
    Interface Type: SATA
    Size: 2 TB
    Rotational Speed: 5400
    Firmware Revision: 1AQ10001
    Serial Number: S2H7J90C508628
    Model: ATA ST2000DL004 HD20
    Current Temperature (C): 29
    Maximum Temperature (C): 58
    PHY Transfer Rate: 3.0Gbps

    root@OMV:~# omv-sysinfo 31-hpraid


    Quote

    ================================================================================
    = HP Hardware RAID
    ================================================================================


    then...nothing. Sorry

    I have Problems with Plex also. I wanted to delete the plugin. I had this messages:


    (Lese Datenbank ... 41887 Dateien und Verzeichnisse sind derzeit installiert.)
    Entfernen von openmediavault-plexmediaserver ...
    Löschen der Konfigurationsdateien von openmediavault-plexmediaserver ...
    Trigger für openmediavault werden verarbeitet ...
    Restarting engine daemon ...
    openmediavault-omvextrasorg (1.0.13) wird eingerichtet ...
    E: Konnte Sperre /var/lib/dpkg/lock nicht bekommen - open (11: Die Ressource ist zur Zeit nicht verfügbar)
    E: Sperren des Administrationsverzeichnisses (/var/lib/dpkg/) nicht möglich, wird es von einem anderen Prozess verwendet?
    dpkg: Fehler beim Bearbeiten von openmediavault-omvextrasorg (--configure):
    Unterprozess installiertes post-installation-Skript gab den Fehlerwert 100 zurück
    Trigger für openmediavault werden verarbeitet ...
    Restarting engine daemon ...
    Fehler traten auf beim Bearbeiten von:
    openmediavault-omvextrasorg
    Creating index of upgradeable packages ...
    Creating index of OpenMediaVault plugins ...
    E: Sub-process /usr/bin/dpkg returned an error code (1)


    What I have to do?

    At first my english is not like it should be, so I apologize for that.


    This Guide is for peoples who have one of the following HP Raid Array controller:


    Smart Array 5312 Controller
    Smart Array 5302 Controller
    Smart Array 5304 Controller
    Smart Array 532 Controller
    Smart Array 5i Controller
    Smart Array 641 Controller
    Smart Array 642 Controller
    Smart Array 6400 Controller
    Smart Array 6400 EM Controller
    Smart Array 6i Controller
    Smart Array P600 Controller
    Smart Array P400 Controller
    Smart Array P400i Controller
    Smart Array E200 Controller
    Smart Array E200i Controller
    Smart Array P800 Controller
    Smart Array E500 Controller
    Smart Array P700m Controller
    Smart Array P410i Controller
    Smart Array P411 Controller
    Smart Array P212 Controller
    Smart Array P712m Controller
    Smart Array B110i SATA RAID
    Smart Array P812 Controller
    Smart Array P220i Controller
    Smart Array P222 Controller
    Smart Array P420 Controller




    The following Guide is a compilation of individual contributions that I found in the internet but it brought me to the target. Anyway I am not responsible for this tutorial. Perhaps by copy & paste errors contained.


    For all next steps be sure you are logged in as root


    1. Download & Install hpacucli
    At first we have to install the tool 'hpacucli' and therefor we have to download and install the GPG key of the repository
    download the key:

    Code
    wget http://downloads.linux.hp.com/SDR/repo/mcp/GPG-KEY-mcp -O /tmp/proliant.gpg


    installl the key:

    Code
    apt-key add /tmp/proliant.gpg


    create apt sources file for HP/Proliant repo

    Code
    echo -e "deb http://downloads.linux.hp.com/SDR/repo/mcp/wheezy/current non-free" > /etc/apt/sources.list.d/proliant.sources.list


    update apt & install hpacucli package

    Code
    apt-get update && apt-get install hpacucli


    2. Create a nice script to show all information of your controller and drives

    • Change your dir to /usr/sbin
    • open nano
    • put in the following code


    • save it named: hpraidinfo
    • now we have to make the script executable
    Code
    chmod -x /usr/sbin/hpraidinfo


    • if you have no access then
    Code
    chmod 755 /usr/sbin/hpraidinfo


    Time to try.
    root@OMV:~# hpraidinfo


    3. Make a "plugin"
    3.1 make js file

    • makedir /var/www/openmediavault/js/omv/module/admin/service/raidinfo
    • change dir to /var/www/openmediavault/js/omv/module/admin/service/raidinfo
    • open nano
    • put in the following code
    • save it named: raidinfo.js


    • makedir /var/www/openmediavault/js/omv/module/admin/service/raidinfo/hpraidinfo
    • change dir to /var/www/openmediavault/js/omv/module/admin/service/raidinfo/hpraidinfo
    • open nano
    • put in the following code


    • save file for example as: hpraidinfo.js

    3.2 Make inc file

    • change your dir to /usr/share/openmediavault/engined/rpc
    • open nano
    • put in the following code
    • save file for example as: raidinfo.inc

    Finally we have to restart the rpc service


    root@OMV:~# service openmediavault-engined restart



    Perhaps a admin or moderator can make a review of this guide??

    It wasn't a good idea to put the code in this files (system.js/systm.inc). After the last update the system.inc was overwritten. Now I try it again with the plugin guide but I can not get further. I get the message


    Quote

    RPC service not found (name=raidinfo)


    Fehler #2000:
    exception 'OMVException' with message 'RPC service not found (name=raidinfo)' in /usr/share/php/openmediavault/rpc.inc:93
    Stack trace:
    #0 /usr/sbin/omv-engined(501): OMVRpc::exec('raidinfo', 'getRaidInfo', NULL, Array, 1)
    #1 {main}


    My /var/www/openmediavault/js/omv/module/admin/service/raidinfo/hpraidinfo.js file looks like this:



    and my /usr/share/openmediavault/engined/rpc/raidinfo.inc file looks like this:


    Can someone tell me where is my error?