Posts by Reini8020


    I did install OMV on an USB stick and everything is working fine – just the same as it did on the SD Card.

    One thing is bugging me. Since I moved from SD to USB the green ACT_LED is constantly blinking at a 1 Hz interval. I did switch it off by „dtparam=act_led_trigger=none”, but still I am wondering why … And does it hurt my USB-Stick … :)

    (And yes, I did the optional changes from the Flash-Drive-Plugin and all SW is at todays version)

    Nevertheless – I am just curious, Greetings


    Hello !

    On a Rasperry PI there is an option to attach a pushbotton on the GPIO3 pins and this gives a start/stop switch to the Pi. Before the installation of omv this feature did work fine - it´s activated in the /boot/config.txt (dtoverlay=gpio-shutdown)

    AFTER the plain installation of omv (wget -O - this feature does not work any more for shutdown. To me it seems that omv disables all GPIO...

    A start of a PI by closing the GPIO does work, so the general configuration/functionality seems to be OK....

    I did test it with a plain Rasberian (buster) + current updates on a Raspberry PI 3 B+ v1,2 . omv 5.6.2.-1

    Needless to say omv itself works without any problems.

    Any hints would be fine

    Greetings from Graz