did you install OMV in bios mode? if so, that's the problem. the intel graphics chip doesn't work in bios mode.
you have to install it in uefi mode.
Posts by Bladefx
-
-
can you give feedback on this?
ls /dev/dri
-
try to install this package for intel HW
apt install libvpl2 libmfx-gen1.2 intel-media-va-driver-non-free
-
i've already had the same message and in my case it was that my battery in the ups needed to be changed.
-
-
connection to UPS works
root@Virtual:/etc/nut# upsc ups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2001/09/25
battery.mfr.date: 2016/12/29
battery.runtime: 1890
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 27.3
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Back-UPS XS 1500G
device.serial: 4B1652P05747
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: auto
driver.version: 2.8.0
driver.version.data: APC HID 0.98
driver.version.internal: 0.47
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.sensitivity: medium
input.transfer.high: 139
input.transfer.low: 88
input.transfer.reason: input voltage out of range
input.voltage: 117.0
input.voltage.nominal: 120
ups.beeper.status: disabled
ups.delay.shutdown: 20
ups.firmware: 866.L9 .D
ups.firmware.aux: L9
ups.load: 19
ups.mfr: American Power Conversion
ups.mfr.date: 2016/12/29
ups.model: Back-UPS XS 1500G
ups.productid: 0002
ups.realpower.nominal: 865
ups.serial: 4B1652P05747
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.vendorid: 051d
root@Virtual:/etc/nut# cd
root@Virtual:~# upsc ups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2001/09/25
battery.mfr.date: 2016/12/29
battery.runtime: 1524
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 27.3
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Back-UPS XS 1500G
device.serial: 4B1652P05747
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: auto
driver.version: 2.8.0
driver.version.data: APC HID 0.98
driver.version.internal: 0.47
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.sensitivity: medium
input.transfer.high: 139
input.transfer.low: 88
input.transfer.reason: input voltage out of range
input.voltage: 117.0
input.voltage.nominal: 120
ups.beeper.status: disabled
ups.delay.shutdown: 20
ups.firmware: 866.L9 .D
ups.firmware.aux: L9
ups.load: 24
ups.mfr: American Power Conversion
ups.mfr.date: 2016/12/29
ups.model: Back-UPS XS 1500G
ups.productid: 0002
ups.realpower.nominal: 865
ups.serial: 4B1652P05747
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.vendorid: 051d
-
Did you read this guide? Make sure you are using the correct driver for your UPS. [How-to] Use the openmediavault-nut plugin
Has it worked before on OMV6?
(new installation with iso omv7 )
works no1 with omv6 . same configuration
-
-
Hi
I am unable to activate nut service
thank you for your help
Error Box
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; export LANGUAGE=; omv-salt deploy run --no-color nut 2>&1' with exit code '1': debian: ---------- ID: configure_nut_nut_conf Function: file.managed Name: /etc/nut/nut.conf Result: True Comment: File /etc/nut/nut.conf is in the correct state Started: 09:33:14.281310 Duration: 49.832 ms Changes: ---------- ID: divert_nut_nut_conf Function: omv_dpkg.divert_add Name: /etc/nut/nut.conf Result: True Comment: Leaving 'local diversion of /etc/nut/nut.conf to /etc/nut/nut.conf.distrib' Started: 09:33:14.331508 Duration: 11.826 ms Changes: ---------- ID: configure_nut_ups_conf Function: file.managed Name: /etc/nut/ups.conf Result: True Comment: File /etc/nut/ups.conf is in the correct state Started: 09:33:14.343443 Duration: 110.686 ms Changes: ---------- ID: configure_nut_upsd_conf Function: file.managed Name: /etc/nut/upsd.conf Result: True Comment: File /etc/nut/upsd.conf is in the correct state Started: 09:33:14.454220 Duration: 111.595 ms Changes: ---------- ID: configure_nut_upsd_users Function: file.managed Name: /etc/nut/upsd.users Result: True Comment: File /etc/nut/upsd.users updated Started: 09:33:14.565904 Duration: 158.29 ms...
error with omv-salt deploy run nut
debian:
----------
ID: configure_nut_nut_conf
Function: file.managed
Name: /etc/nut/nut.conf
Result: True
Comment: File /etc/nut/nut.conf is in the correct state
Started: 10:12:10.034954
Duration: 46.443 ms
Changes:
----------
ID: divert_nut_nut_conf
Function: omv_dpkg.divert_add
Name: /etc/nut/nut.conf
Result: True
Comment: Leaving 'local diversion of /etc/nut/nut.conf to /etc/nut/nut.conf.distrib'
Started: 10:12:10.081747
Duration: 11.718 ms
Changes:
----------
ID: configure_nut_ups_conf
Function: file.managed
Name: /etc/nut/ups.conf
Result: True
Comment: File /etc/nut/ups.conf is in the correct state
Started: 10:12:10.093548
Duration: 107.853 ms
Changes:
----------
ID: configure_nut_upsd_conf
Function: file.managed
Name: /etc/nut/upsd.conf
Result: True
Comment: File /etc/nut/upsd.conf is in the correct state
Started: 10:12:10.201481
Duration: 109.963 ms
Changes:
----------
ID: configure_nut_upsd_users
Function: file.managed
Name: /etc/nut/upsd.users
Result: True
Comment: File /etc/nut/upsd.users updated
Started: 10:12:10.311524
Duration: 155.908 ms
Changes:
----------
diff:
---
+++
@@ -1,11 +1,11 @@
# This file is auto-generated by openmediavault (https://www.openmediavault.org)
# WARNING: Do not edit this file, your changes will get lost.
[admin]
-password = )u<+n~b#4':PUr|.
+password = 0F)7t`67BRXD$pN!
actions = set
actions = fsd
instcmds = ALL
[monmaster]
-password = XPlR=kp.D=Zp&%;v
+password = M8.`uW[D_GO{<#*_
upsmon master
----------
ID: configure_nut_upsmon_conf
Function: file.managed
Name: /etc/nut/upsmon.conf
Result: True
Comment: File /etc/nut/upsmon.conf updated
Started: 10:12:10.467510
Duration: 156.838 ms
Changes:
----------
diff:
---
+++
@@ -1,6 +1,6 @@
# This file is auto-generated by openmediavault (https://www.openmediavault.org)
# WARNING: Do not edit this file, your changes will get lost.
-MONITOR ups 1 monmaster XPlR=kp.D=Zp&%;v master
+MONITOR ups 1 monmaster M8.`uW[D_GO{<#*_ master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYCMD "/sbin/upssched"
----------
ID: divert_nut_upsmon_conf
Function: omv_dpkg.divert_add
Name: /etc/nut/upsmon.conf
Result: True
Comment: Leaving 'local diversion of /etc/nut/upsmon.conf to /etc/nut/upsmon.conf.distrib'
Started: 10:12:10.624429
Duration: 11.677 ms
Changes:
----------
ID: configure_nut_upssched_conf
Function: file.managed
Name: /etc/nut/upssched.conf
Result: True
Comment: File /etc/nut/upssched.conf is in the correct state
Started: 10:12:10.636215
Duration: 109.265 ms
Changes:
----------
ID: divert_nut_upssched_conf
Function: omv_dpkg.divert_add
Name: /etc/nut/upssched.conf
Result: True
Comment: Leaving 'local diversion of /etc/nut/upssched.conf to /etc/nut/upssched.conf.distrib'
Started: 10:12:10.745563
Duration: 11.186 ms
Changes:
----------
ID: configure_nut_default_upssched_cmd
Function: file.managed
Name: /etc/default/upssched-cmd
Result: True
Comment: File /etc/default/upssched-cmd is in the correct state
Started: 10:12:10.756824
Duration: 108.24 ms
Changes:
----------
ID: remove_nut_udev_serialups_rule
Function: file.absent
Name: /etc/udev/rules.d/99-openmediavault-nut-serialups.rules
Result: True
Comment: File /etc/udev/rules.d/99-openmediavault-nut-serialups.rules is not present
Started: 10:12:10.865138
Duration: 0.347 ms
Changes:
----------
ID: start_nut_driver_service
Function: service.running
Name: nut-driver-enumerator
Result: False
Comment: Service nut-driver-enumerator is already enabled, and is dead
Started: 10:12:11.680556
Duration: 123.512 ms
Changes:
----------
ID: start_nut_server_service
Function: service.running
Name: nut-server
Result: True
Comment: Service restarted
Started: 10:12:11.821139
Duration: 21.857 ms
Changes:
----------
nut-server:
True
----------
ID: monitor_nut_server_service
Function: module.run
Result: True
Comment: monit.monitor: True
Started: 10:12:11.844061
Duration: 6.995 ms
Changes:
----------
monit.monitor:
True
----------
ID: start_nut_monitor_service
Function: service.running
Name: nut-monitor
Result: True
Comment: Service restarted
Started: 10:12:11.868734
Duration: 21.672 ms
Changes:
----------
nut-monitor:
True
----------
ID: monitor_nut_monitor_service
Function: module.run
Result: True
Comment: monit.monitor: True
Started: 10:12:11.890502
Duration: 6.158 ms
Changes:
----------
monit.monitor:
True
Summary for debian
-------------
Succeeded: 15 (changed=6)
Failed: 1
-------------
Total states run: 16
Total run time: 1.010 s
[ERROR ] Service nut-driver-enumerator is already enabled, and is dead
root@Virtual:~# nut-scanner
Scanning USB bus.
No start IP, skipping NUT bus (old connect method)
Scanning NUT bus (avahi method).
[nutdev1]
driver = "usbhid-ups"
port = "auto"
vendorid = "051D"
productid = "0002"
product = "Back-UPS XS 1500G FW:866.L9 .D USB FW:L9"
serial = "4B1652P05747"
vendor = "American Power Conversion"
bus = "001"
-
on my side,
I have several mounts and scripts, so it was easier to differentiate between HDD, SSD and NVME groups.
but I understand that the danger of that. I just wanted to help. but I can understand that it can bring more problems. do you want me to withdraw my message
-
I use this solution ( be careful you can break OMV if you change a wrong parameter)
nano /etc/openmediavault/config.xml
find section mntent
change <dir> /srv/.... (your path) <dir>
save
omv-salt deploy run fstab
reboot
-
Hi ,
after adding a disk in the lvm of the same group to make a cache. on restart omv no longer sees the mount point
work in omv 5
--- Physical volume ---
PV Name /dev/md0
VG Name sasraid5
PV Size 19.10 TiB / not usable 5.00 MiB
Allocatable yes (but full)
PE Size 4.00 MiB
Total PE 5007552
Free PE 0
Allocated PE 5007552
PV UUID kaLx6u-eTW7-8qfE-5aIw-cfgU-l2CQ-KtdEna
--- Physical volume ---
PV Name /dev/nvme1n1
VG Name sasraid5
PV Size <476.94 GiB / not usable <2.34 MiB
Allocatable yes (but full)
PE Size 4.00 MiB
Total PE 122096
Free PE 0
Allocated PE 122096
PV UUID ke8whG-ezbe-blpj-W6Fn-Lseh-3ciX-6Immex
thanks for help
-
see on this forum page
How to setup Nvidia in Plex docker for hardware transcoding?
-
to do it easily in omv
raid with mdadm, put in lvm . build your physical volume, group and logical volumes without your cache
after, add ssd on lvm and extend your group with your ssd
on terminal
lvcreate --type cache --cachemode writethrough --size 100%free --name cache volumename/logicalname /dev/physicalvolume
-
check here for lvm cache
https://access.redhat.com/docu…lvm_cache_volume_creation
Codelvcreate --type cache --cachemode writethrough --size 20G --name cache poolname/dataname /dev/sdx1
