Posts by amr.bedair

    @chente Thank you ...

    It was actually the cable .. changed it to cat 6 and now it is


    root@omv:~# ethtool enp0s31f6

    Settings for enp0s31f6:

    Supported ports: [ TP ]

    Supported link modes: 10baseT/Half 10baseT/Full

    100baseT/Half 100baseT/Full

    1000baseT/Full

    Supported pause frame use: No

    Supports auto-negotiation: Yes

    Supported FEC modes: Not reported

    Advertised link modes: 10baseT/Half 10baseT/Full

    100baseT/Half 100baseT/Full

    1000baseT/Full

    Advertised pause frame use: No

    Advertised auto-negotiation: Yes

    Advertised FEC modes: Not reported

    Speed: 1000Mb/s

    Duplex: Full

    Port: Twisted Pair

    PHYAD: 1

    Transceiver: internal

    Auto-negotiation: on

    MDI-X: on (auto)

    Supports Wake-on: pumbg

    Wake-on: g

    Current message level: 0x00000007 (7)

    drv probe link

    Link detected: yes

    root@omv:~#

    I am using OptiPlex 7040 - Mini Towe, that is supposedly using Dell Ethernet Connection (2) I219-LM

    That they say it should be a gigabit ethernet ..

    but the actual speed I am getting is 100 .. I don't know why and I don't know how to fix


    root@omv:~# ethtool enp0s31f6

    Settings for enp0s31f6:

    Supported ports: [ TP ]

    Supported link modes: 10baseT/Half 10baseT/Full

    100baseT/Half 100baseT/Full

    1000baseT/Full

    Supported pause frame use: No

    Supports auto-negotiation: Yes

    Supported FEC modes: Not reported

    Advertised link modes: 10baseT/Half 10baseT/Full

    100baseT/Half 100baseT/Full

    1000baseT/Full

    Advertised pause frame use: No

    Advertised auto-negotiation: Yes

    Advertised FEC modes: Not reported

    Speed: 100Mb/s

    Duplex: Full

    Port: Twisted Pair

    PHYAD: 1

    Transceiver: internal

    Auto-negotiation: on

    MDI-X: on (auto)

    Supports Wake-on: pumbg

    Wake-on: g

    Current message level: 0x00000007 (7)

    drv probe link

    Link detected: yes


    I tried to download driver compile and install ,, but I failed ... "failed to compile :("


    any help will be appreciated