Posts by new4u

    Update: I disabled the "backports"-sources, and then no kept-back-packages are being displayed. Maybe there is an interference between the proxmox-kernel and the backports?

    I tried before updating OMV via shell. All is well, as usual, just libext2fs2 was being kept back and would not update. So I thought I'd manually run

    apt install libext2fs2

    However, I got in my opinion an extremely surprising output:


    apt install libext2fs2

    Paketlisten werden gelesen... Fertig

    Abhängigkeitsbaum wird aufgebaut.

    Statusinformationen werden eingelesen.... Fertig

    Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:

    acl avahi-daemon beep bind9-host btrfs-progs busybox collectd collectd-core

    cpufrequtils cron-apt dctrl-tools f2fs-tools fail2ban fontconfig gdisk

    genisoimage hdparm jfsutils jq klibc-utils libaom0 libatasmart4

    libavahi-core7 libavcodec58 libavformat58 libavutil56 libbind9-161

    libblockdev-loop2 libblockdev-mdraid2 libblockdev-part-err2

    libblockdev-part2 libblockdev-swap2 libblockdev-utils2 libblockdev2

    libbluray2 libbytesize1 libchromaprint1 libcodec2-0.8.1 libcpufreq0

    libcroco3 libcrystalhd3 libdaemon0 libdatrie1 libdbi1 libdns1104 libexif12

    libf2fs-format4 libf2fs5 libfile-slurp-perl libflac8 libfstrm0 libgd3

    libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgeoip1 libgme0 libgomp1

    libgraphite2-3 libgsm1 libgudev-1.0-0 libharfbuzz0b libhiredis0.14

    libid3tag0 libisc1100 libisccc161 libisccfg163

    libjavascript-minifier-xs-perl libjbig0 libjq1 libjs-extjs6 libjs-jquery

    libjs-sphinxdoc libjs-underscore libjson-perl libklibc liblocale-po-perl

    liblockfile-bin liblockfile1 liblwres161 liblzo2-2 libmagic-mgc libmagic1

    libmemcached11 libmemcachedutil2 libmp3lame0 libmpfr6 libmpg123-0

    libnginx-mod-http-auth-pam libnginx-mod-http-dav-ext libnginx-mod-http-echo

    libnginx-mod-http-geoip libnginx-mod-http-image-filter

    libnginx-mod-http-subs-filter libnginx-mod-http-upstream-fair

    libnginx-mod-http-xslt-filter libnginx-mod-mail libnginx-mod-stream

    libnl-genl-3-200 libnorm1 libnss-mdns libnss-myhostname libntfs-3g883

    libogg0 libonig5 libopenjp2-7 libopenmpt0 libossp-uuid16 libpango-1.0-0

    libpangocairo-1.0-0 libpangoft2-1.0-0 libparted-fs-resize0 libpgm-5.2-0

    libprotobuf-c1 libpython3.7 librrd8 librsvg2-2 libshine3 libsnappy1v5

    libsodium23 libsoxr0 libspeex1 libssh-gcrypt-4 libswresample3 libthai-data

    libthai0 libtheora0 libtiff5 libtwolame0 libudisks2-0 libva-drm2 libva-x11-2

    libva2 libvdpau1 libvorbis0a libvorbisenc2 libvorbisfile3 libvpx5

    libwavpack1 libwebp6 libwebpmux3 libx264-155 libx265-165 libxfixes3 libxpm4

    libxvidcore4 libzmq5 libzvbi-common libzvbi0 linux-base logsave minidlna

    monit nginx nginx-common nginx-full ntfs-3g php-bcmath php-cgi

    php-common php-fpm php-mbstring php-pam php-xml php-yaml php7.3-bcmath

    php7.3-cgi php7.3-cli php7.3-common php7.3-fpm php7.3-json php7.3-mbstring

    php7.3-opcache php7.3-readline php7.3-xml proftpd-basic proftpd-mod-vroot

    pve-firmware python3-cached-property python3-certifi python3-chardet

    python3-click python3-colorama python3-dateutil python3-dialog

    python3-distro python3-distutils python3-idna python3-jinja2 python3-lib2to3

    python3-libvirt python3-libxml2 python3-lxml python3-markupsafe

    python3-msgpack python3-natsort python3-netifaces python3-pkg-resources

    python3-psutil python3-pycryptodome python3-pyudev python3-requests

    python3-six python3-systemd python3-urllib3 python3-yaml python3-zmq quota

    quotatool rrdcached rrdtool rsync salt-common salt-minion sdparm

    smartmontools socat sshpass ssl-cert uuid wpasupplicant wsdd xfsprogs


    Verwenden Sie »apt autoremove«, um sie zu entfernen.

    Die folgenden Pakete werden ENTFERNT:

    bsd-mailx cockpit-storaged e2fsprogs initramfs-tools initramfs-tools-core

    libblockdev-fs2 linux-image-5.10.0-0.bpo.3-amd64

    linux-image-5.7.0-0.bpo.2-amd64 linux-image-5.9.0-0.bpo.5-amd64

    linux-image-amd64 openmediavault openmediavault-diskstats

    openmediavault-fail2ban openmediavault-minidlna openmediavault-omvextrasorg

    postfix pve-kernel-5.4 pve-kernel-5.4.101-1-pve pve-kernel-5.4.103-1-pve

    udisks2 virtinst

    Die folgenden Pakete werden aktualisiert (Upgrade):


    WARNUNG: Die folgenden essentiellen Pakete werden entfernt.

    Dies sollte NICHT geschehen, außer Sie wissen genau, was Sie tun!


    1 aktualisiert, 0 neu installiert, 21 zu entfernen und 0 nicht aktualisiert.

    Es müssen 257 kB an Archiven heruntergeladen werden.

    Nach dieser Operation werden 1.464 MB Plattenplatz freigegeben.

    Sie sind im Begriff, etwas potentiell Schädliches zu tun.

    Zum Fortfahren geben Sie bitte »Ja, tue was ich sage!« ein.

    ?] n



    This would basically remove all of OMV and the kernel in my opinion. Could you please briefly advise if this is expected behaviour?

    Thank you in advance.

    geaves: Yes, technically you are surely right. My assumption would be, however, that a fresh new install would resolve the issue, since it seems to be rather a singular occurrence with Beamformer - otherwise the forum would be full of complaints about this issue. And given the time being already invested without resolution, my suggestion lacks technical finesse, but might still save time and lead to the desired goal - a boot without problems.

    Hello Beamformer,

    Yes, you are right, the files would look differently. I wanted just to give you the opportunity of comparison, maybe something different in the rights or the way things are mounted (and thus creating issues) could be easier identified.

    Regarding the SATA-extension-card, I use this one with an ASM1061 chip:…tle_o01_s00?ie=UTF8&psc=1

    However, I had to put it into a PCIe-1x-Slot, not as advertised being compatible in a PCIe-16x-Slot.

    I think if I were in your position, it would be easier to re-install OMV from scratch, simply in comparison between the effort to identify the error versus the relatively short time for going for a clean install from scratch.

    Hello Beamformer, the same problem like you described happened yesterday to me. What caused it was that I had installed a new SATA-controller in a pcie-16x-slot, which the controller did not like, presenting the disk at one boot, but on the next leaving in OMV the disk as "removed".

    Therefore, can you check if your disks in section "Storage", subsection "File Systems" are all 'online' in status, and none is 'missing'?

    The solution for me was to fall back to a previous backup, and install the SATA-controller in a pcie-1x-slot, then everything was working normal.

    Do you have somehow set wrong permissions in /etc/fstab? I somehow have the suspicion that you lack the option "user" in the nfs settings there?

    To easily verify if the fstab options are playing you a trick:

    type on the shell:  sudo nano /etc/fstab. Then uncomment with # the lines, and reboot. If it is working after that, you have narrowed down the source of your issue.

    @pierrre2000, I would also recommend a fresh install. When I undertook this step, it helped me to invest some time and make beforehand of the current configuration screenshots, really clicking open all the options (in particular in networking) and screenshot them. Probably not very elegant, but it helped me later to quite quickly restore all configuration options as I had them before, not forgetting too many things or trying to remember who had gotten which rights on which shares, or what was the name of the network bridge or the miniDLNA-settings...