Sounds about right for 1x PCI-E 3.0 (per slot), it also makes sense that JMB585 works here as tested in my https://github.com/HeyMeco/Roc…ards_m2/JMicron_JMB585.md when trying it out with current NanoPi/Rockchip.
I'm interested in how it would perform with raid 0 for fun, 1 & 5 for practical usage and maybe even raid 10 since it's all done in software.
As per: https://www.cnx-software.com/2…80-pcie-gen-3-x1-sockets/
Only posting about it here because Friendlyelec also recommends and has a prebuilt image with OMV6.
When copying files off my "Nas" I get these spikes at around 200mb/s (2.5Gbe Connection). The weird thing is that when writing to it it works without crashing. The read job finishes in the end though. Any ideas what could cause it?
Last Update: Running the script over the finished install now fixed that bug too.
Thanks for your time @ryecoaaron
I would start over with a fresh image. Make sure you aren't running any other apt commands or have unattended-upgrades running. Then run the install script.
I couldn't tell you why but doing a fresh install (again) worked but now I'm getting a Bad Gateway error on the login page.
root@DietPi:~# sudo wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash
--2022-09-07 00:55:28-- https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 500 Internal Server Error
2022-09-07 00:55:31 ERROR 500: Internal Server Error.
root@DietPi:~# sudo wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash
--2022-09-07 00:55:39-- https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/installScript/master/install [following]
--2022-09-07 00:55:45-- https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/installScript/master/install
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 2606:50c0:8002::154, 2606:50c0:8000::154, 2606:50c0:8001::154, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|2606:50c0:8002::154|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 19737 (19K) [text/plain]
Saving to: ‘STDOUT’
- 100%[======================================================================>] 19.27K --.-KB/s in 0.002s
2022-09-07 00:55:45 (10.3 MB/s) - written to stdout [19737/19737]
Current / permissions = 755
New / permissions = 755
Forcing IPv4 only for apt...
Updating repos before installing...
Hit:1 http://packages.openmediavault.org/public shaitan InRelease
Hit:2 https://deb.debian.org/debian bullseye InRelease
Hit:3 https://download.docker.com/linux/debian bullseye InRelease
Hit:4 https://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.debian.org/debian-security bullseye-security InRelease
Hit:6 https://deb.debian.org/debian bullseye-backports InRelease
Reading package lists... Done
Installing lsb_release...
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 27.9 kB of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 https://deb.debian.org/debian bullseye/main arm64 lsb-release all 11.1.0 [27.9 kB]
Fetched 27.9 kB in 0s (164 kB/s)
(Reading database ... 27169 files and directories currently installed.)
Preparing to unpack .../lsb-release_11.1.0_all.deb ...
Unpacking lsb-release (11.1.0) over (11.1.0) ...
Setting up rrdcached (1.7.2-3+b7) ...Sorry for the weird console above (I just used the first text paste website on google...): So this is how far the script gets but that's where it gets stuck
Here is the terminal session: https://jpst.it/2XODM
The rest of the script output might be helpful along with the actual timer name it is hanging on.
-> phpsessionclean.timer
-> logrotate.timer
-> anacron.timer
and the rrdcached service
The "weird" thing is I had it running just fine for over a month. The issue started with the latest OMV Update (Post Install broke so I thought I'll just clean reinstall DietPi and OMV) and now it doesn't seem to work anymore
Hello everybody,
when I run “sudo wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash” on a clean DietPi Distro (on my NanoPi R5S).
The script gets stuck when any “systemctl start xxx.timer” command runs. I have no idea where to start and any help would be appreciated
How is the drive connected? USB, SATA?
It’s connected via Sata "but" through an Pci-E M.2 Adapter with the JMB585 Chip. It’s using AHCI
Hey everybody, does anybody have an idea what can I do so my Toshiba MG08ACA16TE Drive stops spinning down after a while of no use? I thought selecting anything between 128-255in Advanced Power Management would stop that behavior. I‘d be thankful for any advice!
