Posts by nighthawk36

    Hi all,


    I recently switched the old HP N54l back on, out some disks in it and installed the latest omv release. prior to this I tried xigmanas and the behaviour was the same, so I am kind of saure it is not related to omv as such, but maybe someone could point me to an area ro research closer.


    First I tried internal copying, which looks reasonable to me:


    root@omv:~# rsync --info=progress2 file.txt /sharedfolders/sd2/file3.txt ### from sdd to sata disk
    4,294,967,296 100% 131.44MB/s 0:00:31 (xfr#1, to-chk=0/1)
    root@omv:~# rsync --info=progress2 file.txt /sharedfolders/RD1/file3.txt ### from sdd to Raid5 (still syncing after setup)
    4,294,967,296 100% 117.85MB/s 0:00:34 (xfr#1, to-chk=0/1)
    root@omv:~# rsync --info=progress2 /sharedfolders/RD1/file3.txt /sharedfolders/sd2/file4.txt ### from Raid5 to sata disk
    4,294,967,296 100% 78.24MB/s 0:00:52 (xfr#1, to-chk=0/1)
    root@omv:~# rsync --info=progress2 /sharedfolders/sd2/file4.txt /sharedfolders/RD1/file5.txt ### from sata disk to raid disk
    4,294,967,296 100% 119.89MB/s 0:00:34 (xfr#1, to-chk=0/1)


    but whatever I use via Network, so sftp, rsync, smb, nfs all do not exceed 11MB/s while copying the same files.


    I have a dual port intel nic in the box:
    root@omv:~# lspci | grep -i net
    02:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
    02:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) #### using this eth-if!
    03:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5723 Gigabit Ethernet PCIe (rev 10) #### tried this also, similar numbers


    so also I did some measurements with iperf: I left the ips in for distinguishment, where 195 is the intel nix and 239 is the broadcomm and the last test went via eth lan


    root@omv:~# iperf3 -s
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.2.228, port 41040
    [ 5] local 192.168.2.195 port 5201 connected to 192.168.2.228 port 41042
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-1.00 sec 3.17 MBytes 26.6 Mbits/sec
    [ 5] 1.00-2.00 sec 3.25 MBytes 27.3 Mbits/sec
    [ 5] 2.00-3.00 sec 2.99 MBytes 25.1 Mbits/sec
    [ 5] 3.00-4.00 sec 3.21 MBytes 26.9 Mbits/sec
    [ 5] 4.00-5.00 sec 3.34 MBytes 28.0 Mbits/sec
    [ 5] 5.00-6.00 sec 3.10 MBytes 26.0 Mbits/sec
    [ 5] 6.00-7.00 sec 2.96 MBytes 24.9 Mbits/sec
    [ 5] 7.00-8.00 sec 3.14 MBytes 26.3 Mbits/sec
    [ 5] 8.00-9.00 sec 3.46 MBytes 29.0 Mbits/sec
    [ 5] 9.00-10.00 sec 3.14 MBytes 26.4 Mbits/sec
    [ 5] 10.00-10.04 sec 83.4 KBytes 18.6 Mbits/sec
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
    [ 5] 0.00-10.04 sec 31.8 MBytes 26.6 Mbits/sec receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.2.202, port 34614
    [ 5] local 192.168.2.195 port 5201 connected to 192.168.2.202 port 34616
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-1.00 sec 10.8 MBytes 90.9 Mbits/sec
    [ 5] 1.00-2.00 sec 11.1 MBytes 92.9 Mbits/sec
    [ 5] 2.00-3.00 sec 10.9 MBytes 91.7 Mbits/sec
    [ 5] 3.00-4.00 sec 11.2 MBytes 93.6 Mbits/sec
    [ 5] 4.00-5.00 sec 11.0 MBytes 92.2 Mbits/sec
    [ 5] 5.00-6.00 sec 11.2 MBytes 93.7 Mbits/sec
    [ 5] 6.00-7.00 sec 10.9 MBytes 91.9 Mbits/sec
    [ 5] 7.00-8.00 sec 11.0 MBytes 92.1 Mbits/sec
    [ 5] 8.00-9.00 sec 11.1 MBytes 93.2 Mbits/sec
    [ 5] 9.00-10.00 sec 10.9 MBytes 91.4 Mbits/sec
    [ 5] 10.00-10.04 sec 423 KBytes 94.1 Mbits/sec
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
    [ 5] 0.00-10.04 sec 111 MBytes 92.4 Mbits/sec receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.2.228, port 59518
    [ 5] local 192.168.2.239 port 5201 connected to 192.168.2.228 port 59520
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-1.00 sec 3.39 MBytes 28.5 Mbits/sec
    [ 5] 1.00-2.00 sec 3.77 MBytes 31.6 Mbits/sec
    [ 5] 2.00-3.00 sec 3.87 MBytes 32.4 Mbits/sec
    [ 5] 3.00-4.00 sec 3.88 MBytes 32.6 Mbits/sec
    [ 5] 4.00-5.00 sec 3.26 MBytes 27.4 Mbits/sec
    [ 5] 5.00-6.00 sec 3.17 MBytes 26.6 Mbits/sec
    [ 5] 6.00-7.00 sec 3.15 MBytes 26.4 Mbits/sec
    [ 5] 7.00-8.00 sec 3.16 MBytes 26.5 Mbits/sec
    [ 5] 8.00-9.00 sec 3.07 MBytes 25.7 Mbits/sec
    [ 5] 9.00-10.00 sec 3.61 MBytes 30.3 Mbits/sec
    [ 5] 10.00-10.04 sec 117 KBytes 24.5 Mbits/sec
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
    [ 5] 0.00-10.04 sec 34.5 MBytes 28.8 Mbits/sec receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------
    Accepted connection from 192.168.2.202, port 42842
    [ 5] local 192.168.2.239 port 5201 connected to 192.168.2.202 port 42844
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-1.00 sec 103 MBytes 862 Mbits/sec
    [ 5] 1.00-2.01 sec 108 MBytes 902 Mbits/sec
    [ 5] 2.01-3.00 sec 108 MBytes 909 Mbits/sec
    [ 5] 3.00-4.00 sec 111 MBytes 930 Mbits/sec
    [ 5] 4.00-5.00 sec 109 MBytes 913 Mbits/sec
    [ 5] 5.00-6.00 sec 108 MBytes 903 Mbits/sec
    [ 5] 6.00-7.00 sec 108 MBytes 905 Mbits/sec
    [ 5] 7.00-8.00 sec 107 MBytes 896 Mbits/sec
    [ 5] 8.00-9.00 sec 108 MBytes 908 Mbits/sec
    [ 5] 9.00-10.00 sec 108 MBytes 904 Mbits/sec
    [ 5] 10.00-10.04 sec 3.41 MBytes 639 Mbits/sec
    - - - - - - - - - - - - - - - - - - - - - - - - -
    [ ID] Interval Transfer Bandwidth
    [ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
    [ 5] 0.00-10.04 sec 1.05 GBytes 902 Mbits/sec receiver
    -----------------------------------------------------------
    Server listening on 5201
    -----------------------------------------------------------


    any hint where to search closer woudl be appreciated, i am not the best in deep inspections but relatively ok in basic troubleshooting


    Thanks in advance

    from nginx error.log


    Code
    2014/09/15 21:57:52 [emerg] 2794#0: bind() to 0.0.0.0:80 failed (98: Address already in use)
    2014/09/15 21:57:52 [emerg] 2794#0: bind() to 0.0.0.0:80 failed (98: Address already in use)
    2014/09/15 21:57:52 [emerg] 2794#0: bind() to 0.0.0.0:80 failed (98: Address already in use)
    2014/09/15 21:57:52 [emerg] 2794#0: bind() to 0.0.0.0:80 failed (98: Address already in use)
    2014/09/15 21:57:52 [emerg] 2794#0: bind() to 0.0.0.0:80 failed (98: Address already in use)
    2014/09/15 21:57:52 [emerg] 2794#0: still could not bind()

    Thanks David, it proceeded without any errors, hence teh gui doesnt come up


    Code
    Trigger für openmediavault werden verarbeitet ...Restarting engine daemon ...Updating locale files ...Updating file permissions ...Creating index of upgradeable packages ...Creating index of OpenMediaVault plugins ...root@localhost:/etc/apt/sources.list.d# apt-get updateIgn file: Release.gpgIgn file: ReleaseIgn file: Translation-de_DEIgn file: Translation-deIgn file: Translation-enOK http://packages.openmediavault.org kralizec Release.gpgOK http://packages.openmediavault.org kralizec-proposed Release.gpgOK http://packages.openmediavault.org kralizec ReleaseOK http://packages.openmediavault.org kralizec-proposed ReleaseOK http://packages.openmediavault.org kralizec/main amd64 PackagesOK http://packages.openmediavault.org kralizec/partner amd64 PackagesOK http://ftp.de.debian.org wheezy Release.gpgOK http://ftp.de.debian.org wheezy-updates Release.gpgOK http://ftp.de.debian.org wheezy ReleaseOK http://ftp.de.debian.org wheezy-updates ReleaseOK http://security.debian.org wheezy/updates Release.gpgOK http://packages.openmediavault.org kralizec-proposed/main amd64 PackagesOK http://ftp.de.debian.org wheezy/main SourcesOK http://ftp.de.debian.org wheezy/main amd64 PackagesOK http://ftp.de.debian.org wheezy/main Translation-de_DEOK http://ftp.de.debian.org wheezy/main Translation-deOK http://security.debian.org wheezy/updates ReleaseOK http://ftp.de.debian.org wheezy/main Translation-enOK http://ftp.de.debian.org wheezy-updates/main SourcesOK http://ftp.de.debian.org wheezy-updates/main amd64 Packages/DiffIndexOK http://ftp.de.debian.org wheezy-updates/main Translation-en/DiffIndexOK http://security.debian.org wheezy/updates/main SourcesOK http://security.debian.org wheezy/updates/main amd64 PackagesOK http://security.debian.org wheezy/updates/main Translation-enIgn http://packages.openmediavault.org kralizec/main Translation-de_DEIgn http://packages.openmediavault.org kralizec/main Translation-deIgn http://packages.openmediavault.org kralizec/main Translation-enIgn http://packages.openmediavault.org kralizec/partner Translation-de_DEIgn http://packages.openmediavault.org kralizec/partner Translation-deIgn http://packages.openmediavault.org kralizec/partner Translation-enIgn http://packages.openmediavault.org kralizec-proposed/main Translation-de_DEIgn http://packages.openmediavault.org kralizec-proposed/main Translation-deIgn http://packages.openmediavault.org kralizec-proposed/main Translation-enCreating index of upgradeable packages ...Creating index of OpenMediaVault plugins ...Paketlisten werden gelesen... Fertigroot@localhost:/etc/apt/sources.list.d# apt-get upgradePaketlisten werden gelesen... FertigAbhängigkeitsbaum wird aufgebaut.Statusinformationen werden eingelesen.... Fertig0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.root@localhost:/etc/apt/sources.list.d# service nginx reloadReloading nginx configuration: nginx.root@localhost:/etc/apt/sources.list.d# apt-get install -fPaketlisten werden gelesen... FertigAbhängigkeitsbaum wird aufgebaut.Statusinformationen werden eingelesen.... Fertig0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.root@localhost:/etc/apt/sources.list.d#


    hence still the gui is not available, so I will opt for the reinstall from scratch

    Ok, I purged the php stuff, nginx-common and all related.


    Afterwards I was bale to run



    and

    That way?




    I think I rocked it

    well, it wasn't me, it was the bloody script I issued :-(


    Hi Folks,


    it's me again - I was fiddling with wordpress - worked fine in the first place.


    Then I discovered - instead of creating a VM or VH for Wordpress to run multiple instances - I could use the multisite functionality.


    So far, so good, main site was fine, but all new sites were not available (404).


    This is where I experimented too much and finally issued


    wget -qO ee rt.cx/ee && sudo bash ee # install easy-engine
    ee stack install # install nginx, php, mysql, postfix


    I saw a couple of omv modules being removed


    During the process I realized that php is now 5.6 mysql as well as well as many other things must have changed - I unluckily forgot to set a proper history in putty:



    after that, my gui tells me 403 - forbidden and I believe I am pretty doomed reagrding the gui? Can someone confirm my view?


    Is there a method to rebuild the gui at least to some basic level? Or do I have to pay the price for my dumbness?


    cheers
    Frank

    That would be doable, sure, but I think the benefits of using the pentium cpu are too litlle in my case.


    The N40 and 312 I own are much less noisier.


    What bothers me most is the lack of a drivebay, as mentioned, u need to by a drive enabler if you are going to mount more then 2 disks in there which is at the moment at 80€.
    Of course a raid controller will be needed as well, not to talk about #RAM. 2G is ok but won't suit long


    I honestly thing this is marketing crap from HP to sell something like this as a barebone server without any possibility to a second stop shop.


    This time I am disappointed, its the first time. I think in that case I can live with less cpu power from the G7, only adding RAM and off we go.

    yeah well,


    I received the server today.
    If I want to mount more then 2 hdds in there I need a drive enablement kit :S .


    If I sum this up with the controller and everything else, I will be well beyond 400€ - so I will send it back and take a G7 instead - just much less work given the price at redcoon.


    However, I switched it on briefly to have a grip on the noise of the fans, and thats a nogo as well.


    cheers


    Frank

    Ok, I resolved it on my own.


    Maybe this helps others running into the same problem:


    performed an apt-clean via the GUI - noticed I had problem with some keys.


    apt-get install openmediavault-keyring postfix


    then uninstalled wordpress and re-installed it again - et voila - it works


    cheers
    Frank

    Hi,


    just wanted to activate Wordpress when runnign into problem that I cannot install the db part of it, in the plugin it is greyed out.


    I tried to un-install and re-install the plug without success, so wordpress is not starting - and BTW mysql is running fine ;-)


    Is there anything I can look for?


    Cheers
    Frank