Posts by Vivien69

  • My DIY NAS - Intel N100 based

    Hi, i'm note sure that ASM1166 based M.2 NVME to SATA 3.0 Adapter will work and if ity work without problems.
    I have buy this motherboard with an Adapter SATA to Nvme (but with JMB575) and it doesn't work.
    After a lot of search I understand that we need a real SATA controller LSI card for a NAS.
    So I have sell my Asus N100l-D-D4 and buy a Asrock N100M with 2 port SATA and above all a port PCI-E 16x to add the controller card.

  • Why I chose an N100 over a Raspberry PI5

    Hello,
    I have buy this configuration.
    Unfortunetly I have buy a Sata controller on M2 port with JMB575 chip and it's not recognized. (https://www.amazon.fr/dp/B0BVMBDG4B)

    After a lot of search I don't know if I buy the same M2 card with ASM1166 controller (will I have errors disk ?)
    or I refund everything and take an Asrock n100m (Mini-ATX :s) to get a PCI-E X16 and LSI HBA SAS controller (But most expensive and more consumption)
    Thank you for help