My Problem was, The DNS server was wrong enter from the System, I change the DNS, and all was good
Beiträge von vandog
-
-
Big Thanks, that has helps.
-
this will not help,
it seems that portainer not override the ports with the given in network port configurationSame error in the log
[services.d] starting services
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address in use)
[services.d] done.
[01-Jan-2020 17:30:29] ERROR: unable to bind listening socket for address '127.0.0.1:9000': Address in use (98)
[01-Jan-2020 17:30:29] ERROR: FPM initialization failed -
Hi there,
i want to install via portainer the plugin Heimdall
I change the port to 8081 at the installation but when Heimdall start it ,it is bind to a wrong port
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address in use)[01-Jan-2020 16:33:55] ERROR: unable to bind listening socket for address '127.0.0.1:9000': Address in use (98)[01-Jan-2020 16:33:55] ERROR: FPM initialization failednginx: [emerg] still could not bind()
What I do wrong ? -
hmm but thats strange.the installation from docker was without problems, after that I get from portainer "DNS Error"
So I have change in omv-firstaid my network setting from "DHCP" to static.
Now this solve the issue and I can install all plugins.
Thanks
Addendum
with DHCP was no entry in the etc/resolv.conf
with static is now my nameserver entered -
Hi there, after my NAs was chrashed with OMV 4 ,have I now installed OMV 5.
The installation from OMV5 and upgrade to OMV 5.2.1-1 was going on without any problems.
But now I cannot install any plugins.
If I want to install portainer I get the info "DNS error"
if I want to install minidlna or WOL get I "Could not resolve 'deb.debian.org' "
How can I solve this issue or how can I install these plugins manually? -
I get also at the installtion from Portainer DNS Error
-
Danke Dir das du dir die Zeit nimmst.
beim wget kommt "Das Dateisystem ist nur lesbar"
dpkg -l | grep docker wird nichts ausgegeben.
Ich denke beim Crash ist zuviel kaputt gegangen und werde mein System zwischen den Tagen mit OMV5 neuaufsetzen.
Das wird wohl der bessere Weg seinWüsche euch allen eine schöne Weihnachtszeit
-
at the end come an Type Error
Code
Alles anzeigenroot@DoggiNas:~# apt-get --purge remove docker-ce Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden Pakete werden ENTFERNT: docker-ce* 0 aktualisiert, 0 neu installiert, 1 zu entfernen und 5 nicht aktualisiert. Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j (Lese Datenbank ... 109892 Dateien und Verzeichnisse sind derzeit installiert.) Löschen der Konfigurationsdateien von docker-ce (5:19.03.5~3-0~debian-stretch) ... Trigger für systemd (232-25+deb9u12) werden verarbeitet ... Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f614a946598> Traceback (most recent call last): File "/usr/lib/python3.5/weakref.py", line 117, in remove TypeError: 'NoneType' object is not callable Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f614a946598> Traceback (most recent call last): File "/usr/lib/python3.5/weakref.py", line 117, in remove TypeError: 'NoneType' object is not callable
-
-
At apt -get remove it tell its not installed
Code
Alles anzeigenroot@DoggiNas:~# apt-get remove openmediavault-docker-gui Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paket »openmediavault-docker-gui« ist nicht installiert, wird also auch nicht en tfernt. 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 2 nicht aktualisiert. root@DoggiNas:~# apt-get remove docker-ce Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paket »docker-ce« ist nicht installiert, wird also auch nicht entfernt. 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 2 nicht aktualisiert. root@DoggiNas:~# dpkg -l | grep docker ii docker-ce-cli 5:19.03.5~3-0~debian-stretch amd64 Docker CLI: the open-source application container engine
at apt-get install docker-ce comes the first Error
Code
Alles anzeigen. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: e nabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2019-12-04 16 :08:33 CET; 4ms ago Docs: https://docs.docker.com Process: 17817 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/container d/containerd.sock (code=exited, status=1/FAILURE) Main PID: 17817 (code=exited, status=1/FAILURE) CPU: 46ms Dez 04 16:08:33 DoggiNas systemd[1]: docker.service: Unit entered failed state. Dez 04 16:08:33 DoggiNas systemd[1]: docker.service: Failed with result 'ex…de'. Hint: Some lines were ellipsized, use -l to show in full. dpkg: Fehler beim Bearbeiten des Paketes docker-ce (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Trigger für systemd (232-25+deb9u12) werden verarbeitet ... Fehler traten auf beim Bearbeiten von: docker-ce E: Sub-process /usr/bin/dpkg returned an error code (1)
-
das wirft er aus
CodePaketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
wenn ich dann
"apt-get install openmediavault-docker-gui" kommt am Ende dasCode
Alles anzeigenFehler traten auf beim Bearbeiten von: docker-ce openmediavault-docker-gui Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f5024b117b8> Traceback (most recent call last): File "/usr/lib/python3.5/weakref.py", line 117, in remove TypeError: 'NoneType' object is not callable Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f5024b117b8> Traceback (most recent call last): File "/usr/lib/python3.5/weakref.py", line 117, in remove TypeError: 'NoneType' object is not callable E: Sub-process /usr/bin/dpkg returned an error code (1)
in der Web Gui zeigt er dann gleich wieder "Fehler Failed to execute XPath query '/config/services/docker'." an
-
Hallo Ich benötige auch einmal eure Hilfe hier.
nach dem mein Nas gecrasht war, war es mir nicht möglich Docker zustarten auch ein entfernen und neuistallieren von Docker ist nicht möglich
System Arrakis 4.1.27-1
Folgende Fehler Meldung kommtHello I also need your help here.
after my NAS crashed, it was not possible for me to start Docker also remove and reinstall Docker is not possible
System Arrakis 4.1.27-1
The following error message appearsCodeFehler #0: OMV\Config\DatabaseException: Failed to execute XPath query '/config/services/docker'. in /usr/share/php/openmediavault/config/database.inc:78 Stack trace: #0 /usr/share/openmediavault/engined/module/docker.inc(31): OMV\Config\Database->get('conf.service.do...') #1 /usr/share/openmediavault/engined/rpc/services.inc(56): OMVModuleDocker->getStatus() #2 [internal function]: OMVRpcServiceServices->getStatus(Array, Array) #3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array) #4 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('getStatus', Array, Array) #5 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('Services', 'getStatus', Array, Array, 1) #6 {main}
dpkg -l | grep docker shows follow
Coderoot@iNas:~# dpkg -l | grep dockeriF docker-ce 5:19.03.5~3-0~debian-stretch amd64 Docker: the open-source application container engineii docker-ce-cli 5:19.03.5~3-0~debian-stretch amd64 Docker CLI: the open-source application container engineiU openmediavault-docker-gui 4.1.6 all OpenMediaVault plugin for Docker
Bei apt-get install openmediavault-docker-gui comes this
at
Codedocker-ce (5:19.03.5~3-0~debian-stretch) wird eingerichtet ...Job for docker.service canceled.invoke-rc.d: initscript docker, action "start" failed.● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) Active: deactivating (stop-sigterm) Docs: https://docs.docker.com Main PID: 31600 (dockerd) Tasks: 12 Memory: 40.9M CPU: 60ms CGroup: /system.slice/docker.service └─31600 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock Nov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.169850994+01:00" level=info msg="ClientConn switching balancer to \"pick_first…module=grpcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.171206184+01:00" level=info msg="parsed scheme: \"unix\"" module=grpcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.171232971+01:00" level=info msg="scheme \"unix\" not registered, fallback to d…module=grpcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.171261147+01:00" level=info msg="ccResolverWrapper: sending update to cc: {[{u…module=grpcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.171307542+01:00" level=info msg="ClientConn switching balancer to \"pick_first…module=grpcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.173906267+01:00" level=info msg="[graphdriver] using prior storage driver: overlay2"Nov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.262428613+01:00" level=error msg="failed to get event" error="rpc error: code …lugins.mobyNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.262542793+01:00" level=warning msg="grpc: addrConn.createTransport failed to connect to…pcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.262549349+01:00" level=warning msg="grpc: addrConn.createTransport failed to connect to…pcNov 27 09:24:20 DoggiNas dockerd[31600]: time="2019-11-27T09:24:20.266178526+01:00" level=info msg="Processing signal 'terminated'"Hint: Some lines were ellipsized, use -l to show in full.dpkg: Fehler beim Bearbeiten des Paketes docker-ce (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurückdpkg: Abhängigkeitsprobleme verhindern Konfiguration von openmediavault-docker-gui: openmediavault-docker-gui hängt ab von docker-ce (>= 5:19.03); aber: Paket docker-ce ist noch nicht konfiguriert. openmediavault-docker-gui hängt ab von docker-ce (<< 5:19.04); aber: Paket docker-ce ist noch nicht konfiguriert. dpkg: Fehler beim Bearbeiten des Paketes openmediavault-docker-gui (--configure): Abhängigkeitsprobleme - verbleibt unkonfiguriertFehler traten auf beim Bearbeiten von: docker-ce openmediavault-docker-guiException ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f8bb0bec7b8>Traceback (most recent call last): File "/usr/lib/python3.5/weakref.py", line 117, in removeTypeError: 'NoneType' object is not callableException ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f8bb0bec7b8>Traceback (most recent call last): File "/usr/lib/python3.5/weakref.py", line 117, in removeTypeError: 'NoneType' object is not callableE: Sub-process /usr/bin/dpkg returned an error code (1)
-
Hey all,
has someone the same issue with the network card from the NAS , after start out of the standy by it is reduce to 10mbit.
if I reboot my Nas then I have 100mbit
I have this problem since kernel 4.18thats shows ethtool eth0
Code
Alles anzeigen/etc$ ethtool eth0 Settings for eth0: Supported ports: [ TP AUI BNC MII FIBRE ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes
I useRelease: 4.1.22-1
Codename: Arrakis
4.19.0-0.bpo.4-amd64 #1 SMP Debian 4.19.28-2~bpo9+1 (2019-03-27) x86_64 GNU/Linux -
habe auch einen alten samsung, wenn du die Vorspultaste festhältst dann, da spult der samsung auch schneller als die 10sek steps.
So ist es zumindest bei mir -
Hello I hope you can help.
On my system runs OMV 4.1.13-1 with Docker 4.1 and Kernel 4.18.0-0When start OMV and I don't login in, comes following massage.
Code[17280.218531] INFO: task md0_raid5:208 blocked for more than 120seconds. [17280.218612] Not tainted 4.18.0-0.bpo.1-amd64 #1 Debian 4.18.6-1~bpo9+1 [17280.218681] "echo 0> /proc/sys/kernel/hung_task_timeout_secs" disables this message. [17280.218937] Info: task jbd2/md0-8:564 blocked for more than 120 seconds. and so on
This message is only on the screen, in the log files I don't found this
-
wenn du deine IP adresse statisch vergeben hast dann, hast du evtl den DNS Server nicht richtig benannt.
Seems like dns settings are not working. Did you setup a static IP address ? If so go back to the network panel and add a dns server for the interface.
-
Hi I have the same issue as chclark
Just updated to 2.0.1 and im getting the warning SABYenc module... NOT found! Expecting v3.0.2 - sabnzbd.org/sabyenc
Tried to follow you commands but im getting also
root@openmediavault:/# add-apt-repository ppa:jcfp/sab-addons
-bash: add-apt-repository: command not foundany ideas
-
@LowDown Thx , this works! I have also delete the cookies!
-
OK I have it done, but nothing happends.
The same picture in Fire Fox as before.