Posts by mcloum

    Evening folks,

    wonder if you can help me, i have the same issue as OP except after removing noexec from /etc/openmediavault/config.xml and running omv-salt deploy run fstab my raid array no longer mounts. when trying to mount witht he WebUI i get the following error:

    {"response":null,"error":{"code":0,"message":"Failed to execute command 'export PATH=\/bin:\/sbin:\/usr\/bin:\/usr\/sbin:\/usr\/local\/bin:\/usr\/local\/sbin; export LANG=C.UTF-8; mount -v --source '\/dev\/disk\/by-label\/Media' 2>&1' with exit code '32': mount: \/srv\/dev-disk-by-label-Media: wrong fs type, bad option, bad superblock on \/dev\/md127, missing codepage or helper program, or other error.","trace":"OMV\\ExecException: Failed to execute command 'export PATH=\/bin:\/sbin:\/usr\/bin:\/usr\/sbin:\/usr\/local\/bin:\/usr\/local\/sbin; export LANG=C.UTF-8; mount -v --source '\/dev\/disk\/by-label\/Media' 2>&1' with exit code '32': mount: \/srv\/dev-disk-by-label-Media: wrong fs type, bad option, bad superblock on \/dev\/md127, missing codepage or helper program, or other error. in \/usr\/share\/php\/openmediavault\/system\/\nStack trace:\n#0 \/usr\/share\/php\/openmediavault\/system\/filesystem\/ OMV\\System\\Process->execute()\n#1 \/usr\/share\/openmediavault\/engined\/rpc\/ OMV\\System\\Filesystem\\Filesystem->mount()\n#2 [internal function]: Engined\\Rpc\\OMVRpcServiceFileSystemMgmt->mount(Array, Array)\n#3 \/usr\/share\/php\/openmediavault\/rpc\/ call_user_func_array(Array, Array)\n#4 \/usr\/share\/php\/openmediavault\/rpc\/ OMV\\Rpc\\ServiceAbstract->callMethod('mount', Array, Array)\n#5 \/usr\/sbin\/omv-engined(537): OMV\\Rpc\\Rpc::call('FileSystemMgmt', 'mount', Array, Array, 1)\n#6 {main}"}}

    The outpuyt of the omv-salt command is as follows:

    I even tried adding noexec back in to /etc/openmediavault/config.xml and ran the omv-salt command again and still no luck (just the errors above)

    I have ran the following

    mdadm --examine /dev/md127

    which gave me the output

    root@nas:~# mdadm --examine /dev/md127
    mdadm: No md superblock detected on /dev/md127.

    Please help :(


    SO there is an issue with the recent Plex media server? Im having an issue where everything is stuttering when i start to play something on my xbox client. I put this down to the recent dashboard update.

    My issue is playing a film (which has worked previously) freezes for about 10 seconds after i start to play, it then jumps forward to where it should be then freezes again.

    Unfortunately 1.5 isn't supported either.

    edit: Nevermind i can install 1.3.5, hopefully :)

    edit2: Nope i can install it but the Daemon wont start. The warning.log states there is no module called "libtorrent" which is related to the errors i got when installing manually.

    As you can see i have libboost installed albeit a higher version

    If i do a

    sudo apt-get dist-upgrade

    I get a list of what has been "kept back" and it also tells me Deluge will be upgraded, which i dont want.

    Is Deluge still in the repo? I cant find it anywhere and i cany get it to install via the terminal (even though i can on a VM) something to do with packages not being installable as the first post said.

    My tracker requires deluge 1.3.11 or transmission 2.08 so at the moment i cant use OMV for its/my intended purpose. Any advice would be appreciated.

    Can you explain more about SNI proxy and how it works?

    Is this a plugin in OMV or something you installed manually?

    From what i understand LE is expecting a response for my subdomains on port 80, but as they are running on ports 9091, 8081 etc then its not getting a response? SNI proxy solves this?

    Yes but not the OMV gui, it points to the transmission install that is running on OMV on port 9091. If i point my browser at i get access to my transmission so i know DNS is resolving correctly.

    The only thing i though was because transmission is protected by a password that letsencrypt wasnt getting the response it needed? I tested by turning off the authentication on transmission but still didn't work.

    I do own my domain, i just edited it out here.

    Its registered through and i created a frame redirect to my public IP along with the ports for my services running on OMV, this part works. Just the generating of the certs for

    Still not working even after a re-install and using only 1 domain :(

    So if i just use 1 sub domain such as "" then try?

    Can i then also create certificates for the other sub domains?

    I thought the beauty of this plugin was you can add multiples to 1 certificate?

    OMV is using port 80 internally, but its not accessible from external. Do i need to make it accessible to the outside world?

    Im also getting "Client Lacks sufficient authorization" error.

    I've removed my main domain from the certificate list but still no go :(

    Any ideas?

    Im using a 1and1 frame redirect to direct my domain to my public IP and using sub domains to point to each service running on my server if thats any use?

    Internally i use just IPs to access my server

    Yep i did that last night all working now :)

    Isn't this something that can be included in the plugin install script?

    I did have some issues with ACLs on the shared folder, i had to set the "other" section to read/write/execute otherwise Couch wasnt able to create folders and files on my shared folder.


    OK my normal info log shows this entry:


    01-05 20:31:30 INFO[hpotato.core.plugins.base] Opening url: get, data: []

    And my error log has only one entry which is:

    01-05 20:29:41 ERROR[chpotato.core._base._core] OpenSSL not available, please install for better requests validation: ``: Traceback (most recent call last): File "/opt/couchpotato/couchpotato/core/_base/", line 84, in dependencies import OpenSSL ImportError: No module named OpenSSL

    Hi all,

    For some time now ive been having issues with couchpotato not being able to snatch torrents from IPTorrents. I use the latest version and set it up with my login details all of which seems to work fine. I then add a movie which i know exists on IPtorrents but Couch will not snatch it. I have set it to download the torrent to a watched folder on my RAID array.

    Is there any permissions i need to change? I was under the impression i shouldnt have too with the plugin version. Couch doesnt show me any error in its logs either so im clueless on where to start to diagnose.