Vielleicht würden Screenshots von "Disks" und "File Systems" helfen. Und den Inhalt von /etc/fstab mit </> einfügen.
System aktuell? Zur Zeit 5.5.16
Vielleicht würden Screenshots von "Disks" und "File Systems" helfen. Und den Inhalt von /etc/fstab mit </> einfügen.
System aktuell? Zur Zeit 5.5.16
There has been a recent update of OMV to fix issues occurring when USB drives are connected.
https://www.openmediavault.org/?p=2836
Try if updating the system fixes it.
Even better would be to have one common console which makes the same things on all computers, like updating packages.
Open three terminals in Tilix, synchronize the input and use omv-update
Armbian Buster from here:
https://www.armbian.com/odroid-hc1/
Then install OMV following this guide
Installing OMV5 on Raspberry PI's, Armbian SBC's, & i386 32-bit platforms
Or install OMV from armbian-config
- PUID=996
Try using a user created in the GUI of OMV.
Should have PUID 1000, 1001, 1002 .... and PGID 100
Then check the log file of the container. In Portainer there is an icon next to the container name to see the logs.
Do you mean you can access the rock64 using ssh (putty), but not the GUI (browser)?
Start from scratch and don't install the desktop environment.
Probably you can also use armbian-config to install OMV.
Is there no alternative with a Linux + OMV pack with recent OMV inside ready to boot ?
nope
Use Armbian Buster from here:
https://www.armbian.com/rock64/
Then install OMV following this guide
Installing OMV5 on Raspberry PI's, Armbian SBC's, & i386 32-bit platforms
It is quite easy using copy+paste
There is now an image for testing
Armbian Buster from here:
https://www.armbian.com/odroid-hc1/
Then install OMV following this guide
Installing OMV5 on Raspberry PI's, Armbian SBC's, & i386 32-bit platforms
I pushed a new version of the autoshutdown plugin ? How to do that ? I have only putty ?
Update from the GUI or
omv-update from CLI/putty
And disable the extras repo since there is nothing in it. how to do that ?
2. The Advanced Setting for DNS hostname couldn't be resolved with 8.8.8.8. What should I enter if don't have IP for domain name yet?
DNS servers: put the IP of your router and one public DNS, e.g 192.168.0.1,8.8.8.8
Search Domains: keep empty
3. In Services SMB/CIFS, I couldn't enable WORKGROUP. because the Host name is limited to 15 characters and mine is raspberrypivictor (17 characters)
You have to use a shorter host name, e.g rpivictor
Can be changed in the GUI of OMV in Network >> General