Posts by ap90033

    Tried that it does not work...

    root@openmediavault:~# zpool import -f RobPool

    This pool uses the following feature(s) not supported by this system:

    com.delphix:log_spacemap (Log metaslab changes on a single spacemap and flush them periodically.)

    All unsupported features are only required for writing to the pool.

    The pool can be imported using '-o readonly=on'.

    cannot import 'RobPool': unsupported version or feature

    Was this

    Does this work??? I am in the same position..

    Have smart drive status bad on my OMV boot drive. Guessing I need to backup and restore to another drive?

    Model Family: Western Digital Caviar Blue Serial ATA
    Device Model: WDC WD1600AAJS-60M0A0
    Serial Number: WD-WMAV35303933
    LU WWN Device Id: 5 0014ee 0abf2cb92
    Firmware Version: 02.03E02
    User Capacity: 160,041,885,696 bytes [160 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: Exact ATA specification draft version not indicated
    Local Time is: Wed Feb 3 18:02:31 2016 EST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x84) Offline data collection activity
    was suspended by an interrupting command from host.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 3060) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 40) minutes.
    SCT capabilities: (0x303f) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    1 Raw_Read_Error_Rate POSR-K 200 200 051 - 14
    3 Spin_Up_Time POS--K 138 138 021 - 4075
    4 Start_Stop_Count -O--CK 099 099 000 - 1121
    5 Reallocated_Sector_Ct PO--CK 199 199 140 - 1
    7 Seek_Error_Rate POSR-K 100 253 051 - 0
    9 Power_On_Hours -O--CK 069 069 000 - 22935
    10 Spin_Retry_Count PO--CK 100 100 051 - 0
    11 Calibration_Retry_Count -O--CK 100 100 000 - 0
    12 Power_Cycle_Count -O--CK 099 099 000 - 1114
    184 End-to-End_Error PO--CK 100 100 097 - 0
    187 Reported_Uncorrect -O--CK 100 100 000 - 0
    188 Command_Timeout -O--CK 100 099 000 - 17180131332
    190 Airflow_Temperature_Cel -O---K 069 045 040 - 31
    192 Power-Off_Retract_Count -O--CK 200 200 000 - 134
    193 Load_Cycle_Count -O--CK 200 200 000 - 1121
    196 Reallocated_Event_Count -O--CK 199 199 000 - 1
    197 Current_Pending_Sector -O--CK 200 200 000 - 0
    198 Offline_Uncorrectable ----CK 200 200 000 - 0
    199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
    200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
    ||||||_ K auto-keep
    |||||__ C event count
    ||||___ R error rate
    |||____ S speed/performance
    ||_____ O updated online
    |______ P prefailure warning

    SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
    Device Error Count: 14
    CR = Command Register
    FEATR = Features Register
    COUNT = Count (was: Sector Count) Register
    LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
    LH = LBA High (was: Cylinder High) Register ] LBA
    LM = LBA Mid (was: Cylinder Low) Register ] Register
    LL = LBA Low (was: Sector Number) Register ]
    DV = Device (was: Device/Head) Register
    DC = Device Control Register
    ER = Error register
    ST = Status register
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    SCT Status Version: 2
    SCT Version (vendor specific): 258 (0x0102)
    SCT Support Level: 1
    Device State: SMART Off-line Data Collection executing in background (4)
    Current Temperature: 31 Celsius
    Power Cycle Min/Max Temperature: 16/43 Celsius
    Lifetime Min/Max Temperature: ?/50 Celsius
    Under/Over Temperature Limit Count: 0/0
    SCT Temperature History Version: 2
    Temperature Sampling Period: 1 minute
    Temperature Logging Interval: 1 minute
    Min/Max recommended Temperature: 0/60 Celsius
    Min/Max Temperature Limit: -41/85 Celsius
    Temperature History Size (Index): 128 (26)

    Index Estimated Time Temperature Celsius
    27 2016-02-03 15:55 31 ************
    ... ..(126 skipped). .. ************
    26 2016-02-03 18:02 31 ************

    SCT Error Recovery Control:
    Read: 85 (8.5 seconds)
    Write: 85 (8.5 seconds)

    SATA Phy Event Counters (GP Log 0x11)
    ID Size Value Description
    0x0001 2 0 Command failed due to ICRC error
    0x0002 2 0 R_ERR response for data FIS
    0x0003 2 0 R_ERR response for device-to-host data FIS
    0x0004 2 0 R_ERR response for host-to-device data FIS
    0x0005 2 0 R_ERR response for non-data FIS
    0x0006 2 0 R_ERR response for device-to-host non-data FIS
    0x0007 2 0 R_ERR response for host-to-device non-data FIS
    0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
    0x8000 4 11435147 Vendor specific

    Just curious, been trying to run updates for past several days but they fail. This happened before and resolved itself because of servers offline. Does anyone know if this is the case this weekend?

    Failed to execute command 'export LANG=C; apt-get --yes --force-yes --download-only --reinstall install 'libmono-2.0-dev' 2>&1': Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libmono-accessibility4.0-cil libmono-c5-1.1-cil libmono-cairo4.0-cil libmono-cecil-private-cil libmono-cil-dev libmono-codecontracts4.0-cil libmono-compilerservices-symbolwriter4.0-cil libmono-corlib4.5-cil libmono-cscompmgd0.0-cil libmono-csharp4.0c-cil libmono-custommarshalers4.0-cil libmono-data-tds4.0-cil libmono-db2-1.0-cil libmono-debugger-soft4.0a-cil libmono-http4.0-cil libmono-i18n-cjk4.0-cil libmono-i18n-mideast4.0-cil libmono-i18n-other4.0-cil libmono-i18n-rare4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-all libmono-i18n4.0-cil libmono-ldap4.0-cil libmono-management4.0-cil libmono-messaging-rabbitmq4.0-cil libmono-messaging4.0-cil libmono-microsoft-build-engine4.0-cil libmono-microsoft-build-framework4.0-cil libmono-microsoft-build-tasks-v4.0-4.0-cil libmono-microsoft-build-utilities-v4.0-4.0-cil libmono-microsoft-build4.0-cil libmono-microsoft-csharp4.0-cil libmono-microsoft-visualc10.0-cil libmono-microsoft-web-infrastructure1.0-cil libmono-oracle4.0-cil libmono-parallel4.0-cil libmono-peapi4.0a-cil libmono-posix4.0-cil libmono-rabbitmq4.0-cil libmono-relaxng4.0-cil libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-simd4.0-cil libmono-sqlite4.0-cil libmono-system-componentmodel-composition4.0-cil libmono-system-componentmodel-dataannotations4.0-cil libmono-system-configuration-install4.0-cil libmono-system-configuration4.0-cil libmono-system-core4.0-cil libmono-system-data-datasetextensions4.0-cil libmono-system-data-entity4.0-cil libmono-system-data-linq4.0-cil libmono-system-data-services-client4.0-cil libmono-system-data-services4.0-cil libmono-system-data4.0-cil libmono-system-design4.0-cil libmono-system-drawing-design4.0-cil libmono-system-drawing4.0-cil libmono-system-dynamic4.0-cil libmono-system-enterpriseservices4.0-cil libmono-system-identitymodel-selectors4.0-cil libmono-system-identitymodel4.0-cil libmono-system-io-compression-filesystem4.0-cil libmono-system-io-compression4.0-cil libmono-system-json-microsoft4.0-cil libmono-system-json4.0-cil libmono-system-ldap-protocols4.0-cil libmono-system-ldap4.0-cil libmono-system-management4.0-cil libmono-system-messaging4.0-cil libmono-system-net-http-formatting4.0-cil libmono-system-net-http-webrequest4.0-cil libmono-system-net-http4.0-cil libmono-system-net4.0-cil libmono-system-numerics4.0-cil libmono-system-reactive-core2.2-cil libmono-system-reactive-debugger2.2-cil libmono-system-reactive-experimental2.2-cil libmono-system-reactive-interfaces2.2-cil libmono-system-reactive-linq2.2-cil libmono-system-reactive-observable-aliases0.0-cil libmono-system-reactive-platformservices2.2-cil libmono-system-reactive-providers2.2-cil libmono-system-reactive-runtime-remoting2.2-cil libmono-system-reactive-windows-forms2.2-cil libmono-system-reactive-windows-threading2.2-cil libmono-system-runtime-caching4.0-cil libmono-system-runtime-durableinstancing4.0-cil libmono-system-runtime-serialization-formatters-soap4.0-cil libmono-system-runtime-serialization4.0-cil libmono-system-

    When I try to update it seems to be in a loop. Help?

    Filesystem Size Used Avail Use% Mounted on
    rootfs 141G 2.1G 132G 2% /
    udev 10M 0 10M 0% /dev
    tmpfs 770M 960K 769M 1% /run
    /dev/disk/by-uuid/f4e9fd99-f030-4684-b67f-0340997c4805 141G 2.1G 132G 2% /
    tmpfs 5.0M 0 5.0M 0% /run/lock
    tmpfs 2.8G 4.0K 2.8G 1% /run/shm
    /dev/md0 22T 5.6T 17T 26% /media/5d70d103-18b9-4dc5-b923-26874076af39

    I posted to have it added. Below is the conversation thus far. Is there some specific buzzword, log, tech jargon, or magic jellybean to give him so we can simply have someone way smarter than me look to see the driver or whatever is missing for my ups be added so it works?

    Can we please add this UPS?
    > idVendor 0x0764 Cyber Power System, Inc.
    > idProduct 0x0005 Cyber Power UPS

    What specifically would you like to add?…r/drivers/cps-hid.c#L58If you would like to contribute some information reported by the UPS, we have some suggestions here: CPS models are listed here, but if you have updated or conflicting information, we would appreciate hearing about that as well:…_Power_Systems/index.html