Posts by tomeklm

Thank's. Output of this command is:

Quote

DEVLINKS=/dev/disk/by-id/ata-WDC_WD20EARX-00PASB0_WD-WMAZA4998025 /dev/disk/by-id/wwn-0x50014ee002cc1b98 /dev/disk/by-path/pci-0000:00:13.5-usb-0:3:1.0-scsi-0:0:0:0
DEVNAME=/dev/sdd
DEVPATH=/devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0/host8/target8:0:0/8:0:0:0/block/sdd
DEVTYPE=disk
ID_ATA=1
ID_ATA_DOWNLOAD_MICROCODE=1
ID_ATA_FEATURE_SET_HPA=1
ID_ATA_FEATURE_SET_HPA_ENABLED=1
ID_ATA_FEATURE_SET_PM=1
ID_ATA_FEATURE_SET_PM_ENABLED=1
ID_ATA_FEATURE_SET_PUIS=1
ID_ATA_FEATURE_SET_PUIS_ENABLED=0
ID_ATA_FEATURE_SET_SECURITY=1
ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN=388
ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=388
ID_ATA_FEATURE_SET_SMART=1
ID_ATA_FEATURE_SET_SMART_ENABLED=1
ID_ATA_SATA=1
ID_ATA_SATA_SIGNAL_RATE_GEN1=1
ID_ATA_SATA_SIGNAL_RATE_GEN2=1
ID_ATA_WRITE_CACHE=1
ID_ATA_WRITE_CACHE_ENABLED=0
ID_BUS=ata
ID_MODEL=WDC_WD20EARX-00PASB0
ID_MODEL_ENC=WDC\x20WD20EARX-00PASB0\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_PART_TABLE_TYPE=dos
ID_PATH=pci-0000:00:13.5-usb-0:3:1.0-scsi-0:0:0:0
ID_PATH_TAG=pci-0000_00_13_5-usb-0_3_1_0-scsi-0_0_0_0
ID_REVISION=51.0AB15
ID_SERIAL=WDC_WD20EARX-00PASB0_WD-WMAZA4998025
ID_SERIAL_SHORT=WD-WMAZA4998025
ID_TYPE=disk
ID_WWN=0x50014ee002cc1b98
ID_WWN_WITH_EXTENSION=0x50014ee002cc1b98
MAJOR=8
MINOR=48
SUBSYSTEM=block
UDEV_LOG=3
USEC_INITIALIZED=17074329775
root@OpenMediaVault:~#

Display More

It read S.M.A.R.T values. There is problem with Openmediavault WebUI and a smartctl call.

In CLI I have output data:

Quote

root@OpenMediaVault:~# smartctl -d sat -x /dev/sdd
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD20EARX-00PASB0
Serial Number: WD-WMAZA4998025
LU WWN Device Id: 5 0014ee 002cc1b98
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jan 2 12:06:03 2016 CETSMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

Display More

Yes, its USB 3.0 Sata Enclosure.

Hi, I have running OMW 2.1.23. When I try to run S.M.A.R.T. test from WebUI i have following command:

Quote

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

/dev/disk/by-id/ata-WDC_WD20EARX-00PASB0_WD-WMAZA4998025: Unsupported USB bridge [0x152d:0x0539 (0x100)]
Smartctl: please specify device type with the -d option.

Use smartctl -h to get a usage summary

Runing test via CLI with - d sat parameter works fine, e.g.

Quote

smartctl -d sat -x /dev/sdd

Any ideas? It should be fixed according to eralier posts.