[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.14.69-odroidxu4 (root@nightly) (gcc version 6.4.1 20171012 (Linaro GCC 6.4-2017.11)) #34 SMP PREEMPT Wed Sep 19 12:45:24 CEST 2018
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=50c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000] free_area_init_node: node 0, pgdat c0b4cd80, node_mem_map eee25000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:31
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 16 pages/cpu @eed6d000 s35724 r8192 d21620 u65536
[    0.000000] pcpu-alloc: s35724 r8192 d21620 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 consoleblank=0 loglevel=1 panic=10 root=UUID=d0da7bbe-e3af-4588-8715-aa5c4478eb88 rootfstype=btrfs rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  s5p_mfc.mem=16M
[    0.000000] hdmi: using HDMI mode
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1906016K/2074624K available (6144K kernel code, 311K rwdata, 2116K rodata, 1024K init, 330K bss, 37536K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0xc0008000 - 0xc0700000   (7136 kB)
                     .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
                     .data : 0xc0b00000 - 0xc0b4dd20   ( 312 kB)
                      .bss : 0xc0b559f0 - 0xc0ba82d8   ( 331 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] hperf_hmp: fast CPUs mask: 000000F0
[    0.000000] hperf_hmp: slow CPUs mask: 0000000F
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000025] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001542] Console: colour dummy device 80x30
[    0.001557] console [tty1] enabled
[    0.001586] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001600] pid_max: default: 32768 minimum: 301
[    0.001745] Security Framework initialized
[    0.001758] AppArmor: AppArmor disabled by boot time parameter
[    0.001814] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001832] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002566] CPU: Testing write buffer coherency: ok
[    0.003349] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.040055] Setting up static identity map for 0x40100000 - 0x40100054
[    0.040657] ARM CCI driver probed
[    0.040875] Exynos MCPM support installed
[    0.059995] Hierarchical SRCU implementation.
[    0.099993] smp: Bringing up secondary CPUs ...
[    0.170318] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.220298] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.290292] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.360259] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.410268] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.430542] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.450527] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.450663] smp: Brought up 1 node, 8 CPUs
[    0.450676] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.450681] CPU: All CPU(s) started in HYP mode.
[    0.450686] CPU: Virtualization extensions available.
[    0.452347] devtmpfs: initialized
[    0.469136] random: get_random_u32 called from bucket_table_alloc+0xa3/0x194 with crng_init=0
[    0.469667] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.469789] hperf_hmp: registered cpufreq transition notifier
[    0.469943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.469958] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.472408] pinctrl core: initialized pinctrl subsystem
[    0.474421] NET: Registered protocol family 16
[    0.482333] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.490355] cpuidle: using governor menu
[    0.498933] exynos-audss-clk 3810000.audss-clock-controller: epll 180633609
[    0.520067] EXYNOS5420 PMU initialized
[    0.607944] SCSI subsystem initialized
[    0.608118] usbcore: registered new interface driver usbfs
[    0.608165] usbcore: registered new interface driver hub
[    0.608320] usbcore: registered new device driver usb
[    0.608749] i2c-gpio soc:i2c-hdmi: using pins 177 (SDA) and 178 (SCL)
[    0.609265] s3c-i2c 12c70000.i2c: slave address 0x00
[    0.609278] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz
[    0.609504] s3c-i2c 12c70000.i2c: i2c-1: S3C I2C adapter
[    0.609992] media: Linux media interface: v0.10
[    0.610026] Linux video capture interface: v2.00
[    0.610328] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    0.611131] Advanced Linux Sound Architecture Driver Initialized.
[    0.612419] clocksource: Switched to clocksource mct-frc
[    0.612573] VFS: Disk quotas dquot_6.6.0
[    0.612633] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.622910] NET: Registered protocol family 2
[    0.623463] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.623539] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.623693] TCP: Hash tables configured (established 8192 bind 8192)
[    0.623789] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.623826] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.624112] NET: Registered protocol family 1
[    0.624648] RPC: Registered named UNIX socket transport module.
[    0.624656] RPC: Registered udp transport module.
[    0.624664] RPC: Registered tcp transport module.
[    0.624672] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.624852] Trying to unpack rootfs image as initramfs...
[    1.028570] Freeing initrd memory: 6732K
[    1.030082] audit: initializing netlink subsys (disabled)
[    1.030275] audit: type=2000 audit(1.020:1): state=initialized audit_enabled=0 res=1
[    1.030446] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.038359] NFS: Registering the id_resolver key type
[    1.038381] Key type id_resolver registered
[    1.038388] Key type id_legacy registered
[    1.038406] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.038446] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.039085] aufs 4.14-20171218
[    1.044814] bounce: pool size: 64 pages
[    1.044863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.045048] io scheduler noop registered
[    1.045056] io scheduler deadline registered
[    1.045300] io scheduler cfq registered (default)
[    1.045308] io scheduler mq-deadline registered
[    1.045316] io scheduler kyber registered
[    1.047615] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.048529] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.048592] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.048913] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.048975] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.053852] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    1.053864] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    1.056016] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.056028] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.058163] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.058174] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.058870] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.058882] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.109222] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.111274] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    1.111615] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    1.111941] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    1.112030] console [ttySAC2] enabled
[    1.112347] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    1.114355] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu
[    1.114409] iommu: Adding device 14450000.mixer to group 0
[    1.115983] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[    1.116653] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    1.116757] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    1.116813] iommu: Adding device 10850000.g2d to group 1
[    1.117151] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully probed.
[    1.118207] exynos-rot 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    1.118256] iommu: Adding device 11c00000.rotator to group 2
[    1.118578] exynos-rot 11c00000.rotator: The exynos rotator is probed successfully
[    1.119274] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    1.123546] mali 11800000.mali: Continuing without Mali regulator control
[    1.124322] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    1.124752] mali 11800000.mali: Protected mode not available
[    1.125132] devfreq devfreq0: Couldn't update frequency transition information.
[    1.125672] mali 11800000.mali: Probed as mali0
[    1.134263] brd: module loaded
[    1.143430] loop: module loaded
[    1.144127] libphy: Fixed MDIO Bus: probed
[    1.144463] usbcore: registered new interface driver r8152
[    1.144511] usbcore: registered new interface driver cdc_ether
[    1.144546] usbcore: registered new interface driver cdc_subset
[    1.146588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.146596] ehci-exynos: EHCI EXYNOS driver
[    1.146936] exynos-ehci 12110000.usb: EHCI Host Controller
[    1.146962] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    1.147251] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000
[    1.172471] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    1.172670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.172681] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172692] usb usb1: Product: EHCI Host Controller
[    1.172701] usb usb1: Manufacturer: Linux 4.14.69-odroidxu4 ehci_hcd
[    1.172710] usb usb1: SerialNumber: 12110000.usb
[    1.173254] hub 1-0:1.0: USB hub found
[    1.173298] hub 1-0:1.0: 3 ports detected
[    1.174136] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.174164] ohci-exynos: OHCI EXYNOS driver
[    1.174367] exynos-ohci 12120000.usb: USB Host Controller
[    1.174390] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    1.174496] exynos-ohci 12120000.usb: irq 80, io mem 0x12120000
[    1.246655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.246666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.246676] usb usb2: Product: USB Host Controller
[    1.246685] usb usb2: Manufacturer: Linux 4.14.69-odroidxu4 ohci_hcd
[    1.246693] usb usb2: SerialNumber: 12120000.usb
[    1.247179] hub 2-0:1.0: USB hub found
[    1.247224] hub 2-0:1.0: 3 ports detected
[    1.248715] usbcore: registered new interface driver usb-storage
[    1.249342] mousedev: PS/2 mouse device common for all mice
[    1.250741] i2c /dev entries driver
[    1.265761] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    1.267545] random: fast init done
[    1.282391] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    1.300575] vdd_ldo30: Bringing 1800000uV into 3300000-3300000uV
[    2.355148] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    2.357914] IR NEC protocol handler initialized
[    2.357922] IR RC5(x/sz) protocol handler initialized
[    2.357929] IR RC6 protocol handler initialized
[    2.357936] IR JVC protocol handler initialized
[    2.357943] IR Sony protocol handler initialized
[    2.357949] IR SANYO protocol handler initialized
[    2.357956] IR Sharp protocol handler initialized
[    2.357963] IR MCE Keyboard/mouse protocol handler initialized
[    2.357970] IR XMP protocol handler initialized
[    2.358664] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    2.358714] iommu: Adding device 11f50000.jpeg to group 3
[    2.359057] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video30
[    2.359210] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video31
[    2.359218] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    2.359421] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    2.359470] iommu: Adding device 11f60000.jpeg to group 4
[    2.359797] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video32
[    2.359945] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video33
[    2.359953] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    2.361026] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    2.361147] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    2.361206] iommu: Adding device 11000000.codec to group 5
[    2.378993] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    2.379093] (NULL device *): Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    2.379104] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    2.379269] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[    2.379402] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[    2.380729] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    2.380783] iommu: Adding device 13e00000.video-scaler to group 6
[    2.381942] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    2.381992] iommu: Adding device 13e10000.video-scaler to group 7
[   14.705025] thermal thermal_zone0: failed to read out thermal zone (-22)
[   14.705892] thermal thermal_zone1: failed to read out thermal zone (-22)
[   14.706796] thermal thermal_zone2: failed to read out thermal zone (-22)
[   14.707712] thermal thermal_zone3: failed to read out thermal zone (-22)
[   14.708646] thermal thermal_zone4: failed to read out thermal zone (-22)
[   14.709381] device-mapper: uevent: version 1.0.3
[   14.709690] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[   14.719063] sdhci: Secure Digital Host Controller Interface driver
[   14.719070] sdhci: Copyright(c) Pierre Ossman
[   14.719448] Synopsys Designware Multimedia Card Interface Driver
[   14.720486] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[   14.720618] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[   14.720634] dwmmc_exynos 12200000.mmc: Version ID is 250a
[   14.720695] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
[   14.720977] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[   14.753054] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[   14.784125] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[   14.785310] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[   14.785342] dwmmc_exynos 12220000.mmc: Version ID is 250a
[   14.785481] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
[   14.813271] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[   14.853237] s5p-secss 10830000.sss: s5p-sss driver registered
[   14.855438] hidraw: raw HID events driver (C) Jiri Kosina
[   14.856836] usbcore: registered new interface driver usbhid
[   14.856859] usbhid: USB HID core driver
[   14.872669] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[   14.872786] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[   14.872900] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[   14.873010] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[   14.877437] NET: Registered protocol family 17
[   14.877456] NET: Registered protocol family 15
[   14.877506] Key type dns_resolver registered
[   14.878058] Registering SWP/SWPB emulation handler
[   14.878420] registered taskstats version 1
[   14.885622] Key type encrypted registered
[   14.910042] OF: graph: no port node found in /soc/hdmi@14530000
[   14.911121] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[   14.911288] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc075ab94)
[   14.911308] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc075b234)
[   14.911313] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.911318] [drm] No driver support for vblank timestamp query.
[   14.911475] [drm] Cannot find any crtc or sizes
[   14.911912] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0
[   14.912925] [drm] Cannot find any crtc or sizes
[   14.914374] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   14.914389] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[   14.914634] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010
[   14.914668] xhci-hcd xhci-hcd.3.auto: irq 150, io mem 0x12000000
[   14.914841] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   14.914847] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.914853] usb usb3: Product: xHCI Host Controller
[   14.914858] usb usb3: Manufacturer: Linux 4.14.69-odroidxu4 xhci-hcd
[   14.914863] usb usb3: SerialNumber: xhci-hcd.3.auto
[   14.915165] hub 3-0:1.0: USB hub found
[   14.915194] hub 3-0:1.0: 1 port detected
[   14.915403] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   14.915414] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[   14.915422] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0  SuperSpeed
[   14.915505] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   14.915649] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[   14.915655] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.915660] usb usb4: Product: xHCI Host Controller
[   14.915665] usb usb4: Manufacturer: Linux 4.14.69-odroidxu4 xhci-hcd
[   14.915670] usb usb4: SerialNumber: xhci-hcd.3.auto
[   14.915957] hub 4-0:1.0: USB hub found
[   14.915984] hub 4-0:1.0: 1 port detected
[   14.918089] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[   14.918101] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[   14.918330] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010
[   14.918363] xhci-hcd xhci-hcd.6.auto: irq 151, io mem 0x12400000
[   14.918520] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[   14.918525] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.918531] usb usb5: Product: xHCI Host Controller
[   14.918536] usb usb5: Manufacturer: Linux 4.14.69-odroidxu4 xhci-hcd
[   14.918541] usb usb5: SerialNumber: xhci-hcd.6.auto
[   14.918801] hub 5-0:1.0: USB hub found
[   14.918824] hub 5-0:1.0: 1 port detected
[   14.919006] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[   14.919016] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[   14.919025] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0  SuperSpeed
[   14.919088] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   14.919180] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[   14.919186] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.919191] usb usb6: Product: xHCI Host Controller
[   14.919196] usb usb6: Manufacturer: Linux 4.14.69-odroidxu4 xhci-hcd
[   14.919201] usb usb6: SerialNumber: xhci-hcd.6.auto
[   14.919468] hub 6-0:1.0: USB hub found
[   14.919489] hub 6-0:1.0: 1 port detected
[   14.920430] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[   14.920476] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it
[   14.920531] rtc rtc1: invalid alarm value: 1900-1-1 0:0:0
[   14.920625] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[   14.921907] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[   14.922369] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[   14.922729] exynos-bus: new bus device registered: soc:bus_fsys_apb (200000 KHz ~ 200000 KHz)
[   14.922984] exynos-bus: new bus device registered: soc:bus_fsys (200000 KHz ~ 200000 KHz)
[   14.923384] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[   14.923866] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[   14.924308] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[   14.924617] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[   14.925102] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[   14.925541] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[   14.925986] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[   14.926424] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[   14.926783] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[   14.927183] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[   14.927578] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[   14.928065] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[   14.928450] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[   14.928477] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[   14.929227] odroid-audio sound: multicodec <-> 3830000.i2s mapping ok
[   14.930938] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[   14.934203] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
[   14.936860] ALSA device list:
[   14.936866]   #0: Odroid-XU4
[   14.938395] Freeing unused kernel memory: 1024K
[   14.981283] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[   14.981760] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[   14.981835] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[   14.981916] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[   14.982452] NOHZ: local_softirq_pending 80
[   15.202805] mmc1: new ultra high speed SDR104 SDHC card at address 0001
[   15.203336] mmcblk1: mmc1:0001 00000 29.8 GiB 
[   15.204011] NOHZ: local_softirq_pending 40
[   15.209994]  mmcblk1: p1 p2 p3
[   15.216245] NOHZ: local_softirq_pending 40
[   15.217043] NOHZ: local_softirq_pending 40
[   15.217734] NOHZ: local_softirq_pending 40
[   15.218358] NOHZ: local_softirq_pending 40
[   15.218983] NOHZ: local_softirq_pending 40
[   15.219670] NOHZ: local_softirq_pending 40
[   15.220451] NOHZ: local_softirq_pending 40
[   15.220997] NOHZ: local_softirq_pending 40
[   16.122867] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[   16.122947] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[   16.155281] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
[   16.155321] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   16.155352] usb 6-1: Product: USB 10/100/1000 LAN
[   16.155380] usb 6-1: Manufacturer: Realtek
[   16.155408] usb 6-1: SerialNumber: 000001000000
[   16.156659] usb 4-1: New USB device found, idVendor=152d, idProduct=0578
[   16.156680] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   16.156695] usb 4-1: Product: USB to ATA/ATAPI Bridge
[   16.156710] usb 4-1: Manufacturer: JMicron
[   16.156724] usb 4-1: SerialNumber: 0123456789ABCDEF
[   16.190321] scsi host0: uas
[   16.191054] scsi 0:0:0:0: Direct-Access     JMicron  Generic          3101 PQ: 0 ANSI: 6
[   16.191991] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.343484] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[   16.424313] r8152 6-1:1.0 eth0: v1.09.9
[   16.446945] r8152 6-1:1.0 enx001e0632c455: renamed from eth0
[   24.215841] usbcore: registered new interface driver uas
[   26.221015] sd 0:0:0:0: [sda] Spinning up disk...
[   29.282598] .
[   32.885322] ready
[   32.886936] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[   32.886978] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   32.887420] sd 0:0:0:0: [sda] Write Protect is off
[   32.887462] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[   32.888271] sd 0:0:0:0: [sda] Disabling FUA
[   32.888316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.086878]  sda: sda1
[   33.092355] sd 0:0:0:0: [sda] Attached SCSI disk
[   33.672527] raid6: int32x1  gen()   249 MB/s
[   33.842481] raid6: int32x1  xor()   452 MB/s
[   34.012480] raid6: int32x2  gen()   658 MB/s
[   34.182464] raid6: int32x2  xor()   588 MB/s
[   34.352451] raid6: int32x4  gen()   765 MB/s
[   34.522473] raid6: int32x4  xor()   646 MB/s
[   34.692461] raid6: int32x8  gen()   995 MB/s
[   34.862483] raid6: int32x8  xor()   619 MB/s
[   35.032478] raid6: neonx1   gen()  1911 MB/s
[   35.202461] raid6: neonx1   xor()  2572 MB/s
[   35.372454] raid6: neonx2   gen()  2530 MB/s
[   35.542452] raid6: neonx2   xor()  3332 MB/s
[   35.712468] raid6: neonx4   gen()  3636 MB/s
[   35.882454] raid6: neonx4   xor()  3293 MB/s
[   36.052456] raid6: neonx8   gen()  3248 MB/s
[   36.222460] raid6: neonx8   xor()  2862 MB/s
[   36.222467] raid6: using algorithm neonx4 gen() 3636 MB/s
[   36.222472] raid6: .... xor() 3293 MB/s, rmw enabled
[   36.222479] raid6: using neon recovery algorithm
[   36.223125] xor: measuring software checksum speed
[   36.322448]    arm4regs  :  2627.600 MB/sec
[   36.422450]    8regs     :  2157.600 MB/sec
[   36.522450]    32regs    :  2112.000 MB/sec
[   36.622453]    neon      :  3595.600 MB/sec
[   36.622460] xor: using function: neon (3595.600 MB/sec)
[   36.622852] async_tx: api initialized (async)
[   36.684697] Btrfs loaded, crc32c=crc32c-generic
[   36.863025] BTRFS: device fsid d0da7bbe-e3af-4588-8715-aa5c4478eb88 devid 1 transid 2322 /dev/mmcblk1p2
[   36.976378] BTRFS info (device mmcblk1p2): disk space caching is enabled
[   36.976394] BTRFS info (device mmcblk1p2): has skinny extents
[   37.002297] BTRFS info (device mmcblk1p2): enabling ssd optimizations
[   37.389502] BTRFS error (device mmcblk1p2): bad tree block start 18446744073709551615 30457856
[   37.395244] BTRFS info (device mmcblk1p2): read error corrected: ino 0 off 30457856 (dev /dev/mmcblk1p2 sector 75872)
[   37.396701] BTRFS info (device mmcblk1p2): read error corrected: ino 0 off 30461952 (dev /dev/mmcblk1p2 sector 75880)
[   37.397763] random: crng init done
[   37.397777] random: 7 urandom warning(s) missed due to ratelimiting
[   37.398148] BTRFS info (device mmcblk1p2): read error corrected: ino 0 off 30466048 (dev /dev/mmcblk1p2 sector 75888)
[   37.399531] BTRFS info (device mmcblk1p2): read error corrected: ino 0 off 30470144 (dev /dev/mmcblk1p2 sector 75896)
[   37.424860] systemd[1]: System time before build time, advancing clock.
[   37.471726] NET: Registered protocol family 10
[   37.474706] Segment Routing with IPv6
[   37.484059] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.506859] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   37.507382] systemd[1]: Detected architecture arm.
[   37.554689] systemd[1]: Set hostname to <Backup>.
[   38.108816] systemd[1]: Listening on udev Kernel Socket.
[   38.144350] systemd[1]: Created slice System Slice.
[   38.178003] systemd[1]: Mounting POSIX Message Queue File System...
[   38.216977] systemd[1]: Mounting RPC Pipe File System...
[   38.242678] systemd[1]: Listening on fsck to fsckd communication Socket.
[   38.274959] systemd[1]: Created slice User and Session Slice.
[   38.303374] systemd[1]: Created slice system-getty.slice.
[   38.909954] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   39.545631] BTRFS warning (device mmcblk1p2): excessive commit interval 600
[   39.545639] BTRFS info (device mmcblk1p2): use lzo compression
[   39.545644] BTRFS info (device mmcblk1p2): disk space caching is enabled
[   40.381761] systemd-journald[332]: Received request to flush runtime journal from PID 1
[   40.671563] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[   40.671777] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[   40.671785] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[   40.677015] Driver for 1-wire Dallas network protocol.
[   41.062133] ads7846 spi1.1: touchscreen, irq 153
[   41.062719] input: ADS7846 Touchscreen as /devices/platform/soc/12d30000.spi/spi_master/spi1/spi1.1/input/input1
[   41.843278] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: commit=600,errors=remount-ro
[   41.884690] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,discard,acl
[   57.462637] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[   57.462694] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 08 0e 00 00 00 01 00 00 00 00 00 00 40 ec 00
[   57.522535] scsi host0: uas_eh_device_reset_handler start
[   57.673017] usb 4-1: reset SuperSpeed USB device number 2 using xhci-hcd
[   57.706074] scsi host0: uas_eh_device_reset_handler success
[   73.462597] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 
[   73.462653] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 82 00 00 00 00 00 00 00 00 40 ef 00
[   73.502496] scsi host0: uas_eh_device_reset_handler start
[   73.652955] usb 4-1: reset SuperSpeed USB device number 2 using xhci-hcd
[   73.686218] scsi host0: uas_eh_device_reset_handler success
[   73.686447] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x0e
[   73.686474] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x0 [current] [descriptor] 
[   73.686495] sd 0:0:0:0: [sda] tag#0 ASC=0x0 ASCQ=0x1d 
[   73.686521] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 82 00 00 00 00 00 00 00 00 40 ef 00
[  128.904919] r8152 6-1:1.0 enx001e0632c455: carrier on
[  133.984655] zram: Added device: zram0
[  133.985162] zram: Added device: zram1
[  133.985694] zram: Added device: zram2
[  133.986083] zram: Added device: zram3
[  133.987085] zram: Added device: zram4
[  133.987580] zram: Added device: zram5
[  133.987922] zram: Added device: zram6
[  133.988209] zram: Added device: zram7
[  134.024892] zram0: detected capacity change from 0 to 130871296
[  134.050060] Adding 127800k swap on /dev/zram0.  Priority:5 extents:1 across:127800k SS
[  134.051612] zram1: detected capacity change from 0 to 130871296
[  134.068409] Adding 127800k swap on /dev/zram1.  Priority:5 extents:1 across:127800k SS
[  134.069646] zram2: detected capacity change from 0 to 130871296
[  134.087610] Adding 127800k swap on /dev/zram2.  Priority:5 extents:1 across:127800k SS
[  134.089436] zram3: detected capacity change from 0 to 130871296
[  134.105955] Adding 127800k swap on /dev/zram3.  Priority:5 extents:1 across:127800k SS
[  134.107273] zram4: detected capacity change from 0 to 130871296
[  134.123833] Adding 127800k swap on /dev/zram4.  Priority:5 extents:1 across:127800k SS
[  134.124942] zram5: detected capacity change from 0 to 130871296
[  134.143881] Adding 127800k swap on /dev/zram5.  Priority:5 extents:1 across:127800k SS
[  134.145297] zram6: detected capacity change from 0 to 130871296
[  134.167893] Adding 127800k swap on /dev/zram6.  Priority:5 extents:1 across:127800k SS
[  134.169355] zram7: detected capacity change from 0 to 130871296
[  134.187198] Adding 127800k swap on /dev/zram7.  Priority:5 extents:1 across:127800k SS
[  250.004480] NFSD: starting 90-second grace period (net c0b46e80)
[  265.108623] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[  265.108654] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x2 [current] 
[  265.108675] sd 0:0:0:0: [sda] tag#0 ASC=0x4 ASCQ=0x1 
[  265.108701] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x88 88 00 00 00 00 03 a3 81 2a 00 00 00 00 08 00 00
[  265.108721] print_req_error: I/O error, dev sda, sector 15628052992
[  265.222671] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[  358.523765] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[  367.199620] systemd[1]: apt-daily.timer: Adding 9h 10min 6.684383s random time.
[  367.202302] systemd[1]: apt-daily-upgrade.timer: Adding 13min 33.618434s random time.
[  367.817515] systemd[1]: apt-daily.timer: Adding 11h 18min 26.945691s random time.
[  367.820009] systemd[1]: apt-daily-upgrade.timer: Adding 58min 56.628871s random time.
[  368.402559] systemd[1]: apt-daily.timer: Adding 4h 9min 31.947445s random time.
[  368.405997] systemd[1]: apt-daily-upgrade.timer: Adding 56min 8.104927s random time.
