smartctl -a /dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.19.0-0.bpo.4-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST31000524AS Serial Number: 6VPH764G LU WWN Device Id: 5 000c50 045f1cf5b Firmware Version: JC47 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 9 17:47:41 2019 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 099 086 006 Pre-fail Always - 136408021 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 138 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 109178543 9 Power_On_Hours 0x0032 029 029 000 Old_age Always - 62609 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 135 183 Runtime_Bad_Block 0x0032 094 094 000 Old_age Always - 6 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1723 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 262149 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 064 048 045 Old_age Always - 36 (Min/Max 36/38) 194 Temperature_Celsius 0x0022 036 052 000 Old_age Always - 36 (0 17 0 0 0) 195 Hardware_ECC_Recovered 0x001a 036 016 000 Old_age Always - 136408021 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 62869 (143 88 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2770617656 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 531707451 SMART Error Log Version: 1 ATA Error Count: 1723 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1723 occurred at disk power-on lifetime: 62602 hours (2608 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 85 08 00 00 Error: UNC at LBA = 0x00000885 = 2181 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 01 87 08 00 40 00 01:39:42.073 READ FPDMA QUEUED 60 00 01 86 08 00 40 00 01:39:42.073 READ FPDMA QUEUED 60 00 01 85 08 00 40 00 01:39:42.072 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 01:39:42.068 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 01:39:42.067 IDENTIFY DEVICE Error 1722 occurred at disk power-on lifetime: 62602 hours (2608 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 85 08 00 00 Error: UNC at LBA = 0x00000885 = 2181 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 03 85 08 00 40 00 01:39:39.339 READ FPDMA QUEUED 60 00 04 81 08 00 40 00 01:39:39.339 READ FPDMA QUEUED 60 00 01 80 08 00 40 00 01:39:39.339 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 01:39:39.337 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 01:39:39.336 IDENTIFY DEVICE Error 1721 occurred at disk power-on lifetime: 62602 hours (2608 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 85 08 00 00 Error: UNC at LBA = 0x00000885 = 2181 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 80 80 08 00 40 00 01:39:35.981 READ FPDMA QUEUED 60 00 38 40 08 00 40 00 01:39:35.980 READ FPDMA QUEUED 60 00 18 20 08 00 40 00 01:39:35.980 READ FPDMA QUEUED 60 00 08 10 08 00 40 00 01:39:35.980 READ FPDMA QUEUED 60 00 08 78 08 00 40 00 01:39:35.980 READ FPDMA QUEUED Error 1720 occurred at disk power-on lifetime: 62602 hours (2608 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 85 08 00 00 Error: UNC at LBA = 0x00000885 = 2181 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 01 86 08 00 40 00 01:38:43.851 READ FPDMA QUEUED 60 00 01 85 08 00 40 00 01:38:43.851 READ FPDMA QUEUED 60 00 01 87 08 00 40 00 01:38:43.825 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 01:38:43.822 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 01:38:43.821 IDENTIFY DEVICE Error 1719 occurred at disk power-on lifetime: 62602 hours (2608 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 85 08 00 00 Error: UNC at LBA = 0x00000885 = 2181 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 01 87 08 00 40 00 01:38:41.095 READ FPDMA QUEUED 60 00 03 84 08 00 40 00 01:38:41.094 READ FPDMA QUEUED 60 00 03 81 08 00 40 00 01:38:41.094 READ FPDMA QUEUED 60 00 01 80 08 00 40 00 01:38:41.094 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 01:38:41.092 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 62478 2181 # 2 Short offline Completed: read failure 90% 62379 2181 # 3 Short offline Completed: read failure 90% 62356 2181 # 4 Short offline Completed without error 00% 56145 - # 5 Extended offline Completed without error 00% 56084 - # 6 Short offline Completed without error 00% 56080 - # 7 Short offline Completed without error 00% 55943 - # 8 Short offline Completed without error 00% 55775 - # 9 Short offline Completed without error 00% 55607 - #10 Short offline Completed without error 00% 55439 - #11 Short offline Completed without error 00% 55271 - #12 Short offline Completed without error 00% 55103 - #13 Short offline Completed without error 00% 54935 - #14 Short offline Completed without error 00% 54767 - #15 Short offline Completed without error 00% 54599 - #16 Short offline Completed without error 00% 54431 - #17 Short offline Completed without error 00% 54263 - #18 Short offline Completed without error 00% 54095 - #19 Short offline Completed without error 00% 53927 - #20 Short offline Completed without error 00% 53759 - #21 Short offline Completed without error 00% 53424 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.