================================================================================
= HP Hardware RAID
================================================================================

CONTROLLER INFO:
--------------------------------------------------------------------------------
Smart Array P410i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: 5001438009919010
Cache Serial Number: PACCQ9SY201U
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: C
Firmware Version: 3.30
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 25% Read / 75% Write
Drive Write Cache: Disabled
Total Cache Size: 256 MB
Total Cache Memory Available: 144 MB
No-Battery Write Cache: Enabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: Failed (Replace Batteries)
SATA NCQ Supported: True


CONTROLLER STATUS:
--------------------------------------------------------------------------------
Smart Array P410i in Slot 0 (Embedded)
Controller Status: OK
Cache Status: OK
Battery/Capacitor Status: Failed (Replace Batteries/Capacitors)


LOGICAL DRIVE INFO:
--------------------------------------------------------------------------------
Smart Array P410i in Slot 0 (Embedded)
array A
logicaldrive 1 (1.8 TB, RAID 0, OK)
array B
logicaldrive 2 (1.8 TB, RAID 0, OK)
array C
logicaldrive 3 (1.8 TB, RAID 0, OK)
array D
logicaldrive 4 (1.8 TB, RAID 0, OK)
array E
logicaldrive 5 (1.8 TB, RAID 0, OK)
array F
logicaldrive 6 (1.8 TB, RAID 0, OK)


PHYSICAL DRIVE INFO:
--------------------------------------------------------------------------------
Smart Array P410i in Slot 0 (Embedded)
array A
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 2 TB, OK)
array B
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 2 TB, OK)
array C
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 2 TB, OK)
array D
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 2 TB, OK)
array E
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 2 TB, OK)
array F
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 2 TB, OK)


PHYSICAL DRIVE STATUS:
--------------------------------------------------------------------------------
physicaldrive 1I:1:1
Status: OK
Interface Type: SATA
Size: 2 TB
Rotational Speed: 5400
Firmware Revision: 1AN10002
Serial Number: S1UYJ1KZ301377
Model: ATA SAMSUNG HD203WI
Current Temperature (C): 28
Maximum Temperature (C): 49
PHY Transfer Rate: 3.0Gbps
physicaldrive 1I:1:2
Status: OK
Interface Type: SATA
Size: 2 TB
Rotational Speed: 5400
Firmware Revision: 1AN10002
Serial Number: S1UYJ1KZ301738
Model: ATA SAMSUNG HD203WI
Current Temperature (C): 29
Maximum Temperature (C): 47
PHY Transfer Rate: 3.0Gbps
physicaldrive 1I:1:3
Status: OK
Interface Type: SATA
Size: 2 TB
Rotational Speed: 5400
Firmware Revision: 1AQ10001
Serial Number: S2H7J9KB400996
Model: ATA SAMSUNG HD204UI
Current Temperature (C): 22
Maximum Temperature (C): 63
PHY Transfer Rate: 3.0Gbps
physicaldrive 1I:1:4
Status: OK
Interface Type: SATA
Size: 2 TB
Rotational Speed: 5400
Firmware Revision: 1AN10003
Serial Number: S1UYJ1RZ600999
Model: ATA SAMSUNG HD203WI
Current Temperature (C): 27
Maximum Temperature (C): 41
PHY Transfer Rate: 3.0Gbps
physicaldrive 2I:1:5
Status: OK
Interface Type: SATA
Size: 2 TB
Rotational Speed: 5400
Firmware Revision: 1AN10003
Serial Number: S2ACJ1CZA00312
Model: ATA SAMSUNG HD203WI
Current Temperature (C): 27
Maximum Temperature (C): 49
PHY Transfer Rate: 3.0Gbps
physicaldrive 2I:1:6
Status: OK
Interface Type: SATA
Size: 2 TB
Rotational Speed: 5400
Firmware Revision: 1AN10002
Serial Number: S1UYJ1KZ301737
Model: ATA SAMSUNG HD203WI
Current Temperature (C): 23
Maximum Temperature (C): 50
PHY Transfer Rate: 3.0Gbps