Nefertiti Professional

(Quote from Nefertiti)


My bad. I gave you an incomplete suggestion. But you still need to make sure all the directories are correct on both ends. Try this:

192.168.2.30:/export/media/Music /mnt/Music nfs defaults,noatime 0 0

Well like I said I can mount
mount -t nfs 192.168.2.30:/export/media/Music /mnt/Music
or
mount -t nfs 192.168.2.30:/media/Music /mnt/Music
but this not persistent even adding in fstab

192.168.2.30:/export/media/mnt/media/Music nfs defaults,noatime 0 0
or
…

I am getting a small problem
I can mount
mount -t nfs 192.168.2.30:/export/media/Music /mnt/Music
But at reboot this does not persist
although in etc/ fstab I put

192.168.2.30:media /mnt/media/Music nfs defaults,noatime 0 0

what is wrong with it ?

I noticed I had a problem with my NFS mnt point for music I put again
mount -t nfs 192.168.2.30:/export/media/Music /mnt/Music
and I am not sure if it is related but port 4040 is working again.

I do not have anything with port: 4096

root@OMV-Dell:~# sudo ss -tulpn | grep 4040
tcp LISTEN 0 4096 *:4040 *:* users:(("docker-proxy",pid=1113,fd=4))

sudo: netstat: command not found

My container for airsonic was working perfectly out of the blue it cannot start anymore
Failed : port is already allocated and on this machine no other container are using this port?
anyway

Just wondering maybe cleaning the cache of the browser might fix it too .

It came back after a nighty reboot
https://raw.githubusercontent.….0/Template/template.json

Look like my issue got resolve by itself this morning!

Look like my issue got resolve by itself this morning!

my portainer 2.0 is missing template labels. Is anything I should set up in it? I can swear I already use templates in 2.0 before!
with
https://raw.githubusercontent.….0/Template/template.json

Images

I did now I got 3 left not sure why it happened

Got an accumulation of volumes in portainer 283 so far.How to delete them safely?

kind of related my portainer 2.0 is missing template labels. Is anything I should set up in it? I can swear I already use template in 2.0 before!

look at the link I posted mdadm: no arrays found in config file or automatically
and make sure to disconnect any USB drive.

Fixed
I just unplug an extra USB drive!

For some reasons I decided to do a new install at first I ran into grub was getting an other drive like this thread mdadm: no arrays found in config file or automatically I fixed it by following couch_potatozes advice
I was making sure I did update grub,…

Thank you for the advice, I did not know the export command. But I finally fixed it
Replaced the original Drive server side mnt directorie empty on client