legolas08 Beginner

  • Member since Apr 12th 2019
  • Last Activity:
Posts
15
Points
80
Profile Hits
15
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    disabling all the options concerning the S.M.A.R.T. I still have the smartctl service that queries the disks and who knows which option ... I don't understand how it is possible that with everything disabled the service goes on.
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    tried this too, the option that comes up is this:
    (Code, 2 lines)

    but he wakes up anyway
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    if i have not misunderstood what you mean, i set the hd to 128 (minimum power consumption without standby), but the disk was woken up anyway
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    I did another test, I sent the disk to standby and I sent the following command:
    (Code, 7 lines)

    The hd did not wake up. is there any way to set the following parameters as above? Since the changes the file is deleted
    (Code, 10 lines)

  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    I idle a hd with hdparm -y and in the meantime I checked the same with btrace, this is what comes when he wakes up:
    (Code, 45 lines)

  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    the hdparm entry comes out to me too, but it doesn't revive the disk unlike smartctl. Every minute comes out and the hdd goes into spinup
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    thanks for the time you have dedicated to me
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    i use blktrace:
    (Code, 80 lines)

  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    this is the result
    (Code, 91 lines)

  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    I have enabled the smart for each single hard disk now in the file I find this:
    (Code, 17 lines)

    I tried to stop the hd with the command hdparm -Y / dev / sd [abcdef], but after 1 minute they are reactivated by smartctl
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    this is what I find inside the file

    # This file is auto-generated by openmediavault (https://www.openmediavault.org)
    # WARNING: Do not edit this file, your changes will get lost.
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    in this option I have selected idle. I'm not confused it was to make it clear that smartctl is the culprit, because removing smartmontools everything works
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    if i remove smartmontools the hard disks go into spindown regularly, but of course Omv has a number of problems.
  • legolas08

    Replied to the thread Hard Disk spindown.
    Post
    (Quote from macom)

    yes, I put the disks in 127 (intermediate level with standby), spin time 30 minutes. While the smart verification interval is 4800 seconds
  • legolas08

    Posted the thread Hard Disk spindown.
    Thread
    Hello everyone! on omv5 I have 4hd that I use for viewing multimedia files, I'm trying to activate the spindown for all 4, but it does not activate due to the smartctl process that every minute sends the reading to the disks. I brought from the gui to…