wpanic Beginner

  • Member since Apr 11th 2020
  • Last Activity:
Posts
5
Points
30
Profile Hits
15
  • wpanic

    Replied to the thread Degraded Array (RAID 10).
    Post
    (Quote from geaves)

    Agreed. The MoBo has 6 SATA ports and with the one failure, they're now all used. Should more fail, I'll either have to get a SATA card or swap out the MoBo.

    ---------

    On another note, after the array recovered, I started receiving a…
  • wpanic

    Replied to the thread Degraded Array (RAID 10).
    Post
    (Quote from geaves)

    Just a quick update - Wiped and recovered but the first attempt failed. Drive fell back out of the array

    Tried a secure wipe and it started dumping DMA errors, etc.

    Shut down, moved the drive to a new SATA port (last one available)

  • wpanic

    Reacted with Thanks to geaves’s post in the thread Degraded Array (RAID 10).
    Reaction (Post)
    (Quote from wpanic)

    Yes, that's all you should need to do, use Recover on the raid menu to add the drive back.
  • wpanic

    Replied to the thread Degraded Array (RAID 10).
    Post
    Hi Greaves:

    Was able to run all the commands.

    I do not have remote access to the drive.

    Here is the output... I do not see anything out of the ordinary other than /dev/sde not being part of the array.

    As I said earlier, /dev/sde appears to be able to be…