The_Others Beginner

(Quote from Agricola)


Hello Agricola,

thanks for your reply,

Is Plex an expensive program you have to pay for?
At this time I have got a folder structure with different folders will Plex not change this structure? So will Plex not place the thumbnails etc.…

(Quote from macom)

Thanks macom this was exactly what I was looking for!! Now it seems to work fine all the users I added to the group 'users' can read write while anonymous users can only read the files! Thanks !

Hello all,

I have got a SMD share witch is accessibly to everyone. But I want some users have the read only right and others to read and write. It must be very simple I gues? How can I do this,

Thanks!

Hello All,

Photos
On my OMV server I have got photos from my phone which are in easy in jpeg format but I also have got photos from my other camera which are in RAW format (CR2). What I want is to be able to view these photos on the local network. I did…

Hello Macom thank you! that is what I was looking for. I added a screenshot to make it clear for others who read this. I did put an orange rectangle around the setting

Hello Macom thank you for your reply,

I run into another problem when I try to make a new volume I type the following information in Portainer at Volumes:

Name: Lychee
Driver: Local
Driver options:
Name: Lychee_DB and

Value:…

Hello all,

if I take a look at this youtube
youtube.com/watch?v=5rSKD7RUi6k
I see at the time: 3.10
some directory's are made. These directory's are

sharefolder/appdata/Lychee and
sharefolder/appdata/Lycheedb

I think this youtube was made with an 'old'…

(Quote from KM0201)

Hello KM0201,

I will give the wetty program a try when I have got some time

I did change all the lines with "guest" for Test in the Environment variables so SIAB_USER and SIAB_GROUP both now have got the value Test. Then I did add a user in the OMV gui with the name Test and gave this user access to the group ssh and sudo. Now I…

(Quote from KM0201)



Hello KM0201,

Thank you for your reply! well I think the issues are probably because I do not know what to write in the environmental variables. I can log in with SSH in the server that works okay so I do not need shellinabox the main…

Hey gderf thank you! I am kindoff new to this. I did find the Environment variables. I will try a www search on "Environment variables". If you know of a good howto I would appreciate it. There are also no users in the OMV gui under Acces rights…

(Quote from gderf)

okay at least I get a login screen but then I get a login prompt as:

3a19d70ea7ed login:

then I type root but then it tells me login incorrect without asking me for the pasword. what did I do wrong?

(Quote from crashtest)


Hello crashtest, thank you for your reply!

The thing is with RAID1 on the old Mint server I sometimes get low transfer rates when it copies a lot of small files, then the speed goes down to about 10MB/s or even less! while large…

(Quote from gderf)

Yes it works thank you !!

Hello I am new to dockers and containers but I thought to give it a try. I did watch a lot of youtubes about this and searched the internet, but as I am new to this it doesnt work.

I got the OMV extras installed
Portainer is running

In Portainer I did click…

(Quote from mi-hol)


About the Motherboard
It has got an Intel network chip
it supports ECC
Yes there are better ones but the costs are much higher Asrock sells a server board for Ryzen CPU's but it costs 100Eu more compared to this one.

I use 2 x a 4 TB WD…

(Quote from Bizquick)

Hey Bizquick,


Why do you prefer ZFS? I have 2 hd's with the old server I did use RAID1. I wonder if it is wise to go to ZFS.

Hello all,


I can confirm the hardware works fine, at least as far I can judge with my knowledge. I did had to change some hardware options because the hardware store had some delivery problems.


current hardware under test:

• Motherboard: ASRock X470 Master

…

Hello all,

I am building an OMV system intended to do more than only file storage. When I did a backup copy of the existing data from the old server I saw the data speed dropping significantly when copying lots of small files. The data speed dropped when…

Now it works. When I did hit escape a few times I got the option to enter a command prompt. Then I tried to remove the partitions with fdisk, this did fail. Then I did try to see if the SSD was mountend already. this was the case. So I did use umnout to…