When using an OMV installation with the Raspberry Pi device, the OMV web GUI provides under the menu "Storage -> Physical Disks" the following info of the used SD card:
Device: /dev/mmcblk0
Model: n/a
Serial Number: n/a
Vendor: n/a
Capacity: 32GB
It would be nice to have the "n/a" fields populated with all the required information from the SD card. It can be obtained as follows by firing on the shell prompt the following command:
cd /sys/class/mmc_host/mmc?/mmc?:* && echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev) type:$(cat type) date:$(cat date)" ; cd
This will provide in my case the following output:
man:0x000003 oem:0x5344 name:SL32G hwrev:0x8 fwrev:0x0 type:SD date:05/2015
This output can be used with above OMV convention as follows:
Device: /dev/mmcblk0
Model: SL32G
Serial Number: 05/2015_0x8_0x0
Vendor: SD_0x000003_0x5344
Capacity: 32GB
Would it be possible to have this kind of information populated within OMV's web GUI?