That's a problem I had when I first tried the plugin and never solved.
The installation seems to be ok. I followed the instructions in detail and all seems to be fine until I try to connect with the downloaded program.
It stays trying until show a message "myserver disconnected. Timeout connecting to the server."
Is there anything more to do than opening and forwarding the stated ports on router?
thanks.
ZitatStarting Nmap 6.00 ( http://nmap.org ) at 2015-01-20 12:16 EET Initiating UDP Scan at 12:16 Scanning ******.****.******.** (**.**.**.**) [1 port] Completed UDP Scan at 12:16, 0.16s elapsed (1 total ports) Nmap scan report for ********.****.****.*** (**.**.**.**) Host is up. PORT STATE SERVICE 1194/udp open|filtered openvpn
ZitatAlles anzeigenCurrent Server Network Settings
The VPN Server is currently configured with these network settings:
Host Name Local Interface Port Number Protocol
**.**.**.** eth0 1194 TCP
**.**.**.** eth0 1194 UDP
The Connectivity Test attempts to determine the public IP address and FQDN (Fully-Qualified Domain Name) corresponding to the local interface: eth0, and also whether or not clients on the Internet will be able to connect to the VPN Server.
Test Results for TCP
Result:ErrorExplanation:Could not connect to the test server on the Internet.IP Address Tested:(not found)Reverse DNS result:(unknown)
Test Results for UDP
Result:ErrorExplanation:Could not connect to the test server on the Internet.IP Address Tested:(not found)Reverse DNS result:(unknown)
*I configured the server as multi-daemon for the tests.