Hi all,
A newbie here with OMV and only a smattering of linux (Ubuntu/Debian), though learning the hard way.
My issue is the configuration of the USB monitoring of my UPS (Powerwalker 600 VI) which I thought I had done correctly as stated in a few threads on here, i.e. entering driver = usbhid-ups and port = auto. However when I look at the UPS log I just see 'Poll UPS [PowerWalker600VI@localhost] failed - Driver not connected', along with a few other messages like communications cannot be established and so on. Similarly when I look at Services > UPS I get Failed to execute command 'upsc 'PowerWalker600VI' 2>&1': Error: Driver not connected...
I am beginning to think I am stupid, yes I know I probably am, but I cannot follow the linked documentation, it doesn't actually say ... install this driver here, see I need it simple .
Has anyone got a link to simplified instructions or any advice. I do have the PowerWalker software for debian AMD64 but this is for a java GUI monitoring software and I would prefer to keep everything within OMV.
When I run lsusb -v I get the following: (Just the relevant part is pasted below)
Bus 004 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665 Cypress Semiconductor
idProduct 0x5161 USB to Serial
bcdDevice 0.02
iManufacturer 1 INNO TECH
iProduct 2 USB to Serial
iSerial 3 20100826
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3 20100826
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 4 Sample HID
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
Any help greatly appreciated.
Cheers
Andy
-------------------------------------------------------------------------------------------------------------------
Moved to DIY NAS with OMV from Synology and Zyxel NAS's to have greater Freedom on what I use.
-------------------------------------------------------------------------------------------------------------------