Hi All,
Introduction:
I have gotten myself a Tranquil PC type SQA-5H (second gen) on which I would like to install OMV. The SQA is essentially a 5-bay (hot-swap) server based on an Intel Atom D510 and an Intel D510MO board. It has 2 GB RAM and 6 USB ports (and an e-SATA). It was intended for use with WHS but who would want that nowadays
Problem:
After installation and reboot the machine stops at:
Additional information:
If I boot with the USB stick and the USB disk connected at the same time the stick does not boot.
If I use only the stick, the system boots and after I connect the USB disk I can install (with the above mentioned result)
I have tried the "solution" with chroot /target etc. without result (still same error)
I can install on a SATA disk in one of the five bays just fine (but would not like to loose 480+ GB of storage on a system disk or sacrifice a tray)
I have tried IDE 2 USB disk and SATA 2 USB disk. No difference
BIOS settings are default. It allows booting from USB. Detection of USB is set to automatic.
Concluding:
I would really appreciate any help solving this issue. I would rather use OMV than other NAS solutions
If you need more info please let me know.
Any help greatly appreciated!
Greetz,
Sjonnie