Another question I am hoping to get help with. I just upgraded to OMV 4 and while doing that when the system restarted one of my hard drives gave me an error of bad sectors. I tried a bunch of restarts and since there wasnt much on that disk I decided to take it out and format it to nfts. I did a complete scan on my windows computer and it says its clean. I go to reinstall on OMV and it shows the disk. So I go to create a file system and it formats it and after that is complete it shows no errors. Then everything is gone. Go back to disks and it shows it there but does not show up as a file system after it formats to ext4. Any help is appreciated.
Hard Drive Issue
-
- OMV 4.x
- jcschwartz
-
-
Have you checked to see if the drive keeps a S.M.A.R.T. error log? Most do, but it is optional on the part of the manufacturer, not a requirement of the standard.
Have you tried changing the cable and SATA port used on the motherboard?
-
Yes, I swapped it with another sata cable. I have a hot swap nas box and used it to another location. I also did check the smart log and nothing is there.
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!