Hi Everyone,
First post here, Linux newbie and in need of your help.
I am trying to do a simple thing : Installing OMV 4.1.7 (Arrakis) on a Raspberry Pi 3 Model B+ in order to set up a NAS with 2 external HDD and Plex.
I have been reading blogs, tutorials and watching as much as youtube Video about it for the past 2 months before starting to do so this weekend. I expected to have some issue to resolve on the way but after trying numerous times i think i reached my limit of understanding Linux and raspberry Pi.
EDIT : My message was too long so here's PART 1 (PART 2 coming in the thread)
Here's what I used and what I've done so far.
I have :
- 1 Raspberry Pi 3 Model B+ (from ABOX Ultimate Starter Kit w/ the pre-load SD Card w/ NOOBs from amazon)
- 1 32GB Sandisk Ultra Micro SD Card class 10 for Booting
- 1 Western Digital 4TB External HDD
A few important notes:
- My RPI 3b+ has its own power supply 5V
- My Ext. HDD has its own power supply
- I am using Win 10 to format and Flash my SD Card for my RPI 3b+
- I tried on both Chrome and Brave
What I have done : I ended up following this tutorial from TechnoDadLife, I found very well explained.
- I used an USB SD Card reader to plug into my PC (Win 10) and formated the SD Card to FAT32 to wipe clean the pre-load NOOBs and start with a fresh SD Card.
- I went on the OMV website to download the OMV 4.x image. I've tried once with the .iso from the tutorial and once with the one for Raspberry Pi (after the first boot attempt failed)
- I downloaded Etcher to Flash the OMV 4.x image
- I did flashed the OMV 4.x with Etcher with no issue.
- I plugged a monitor to my RPI with HDMI, I plugged my Ext. HDD to one of the USB posrt of the RPI, I plugged the RPI to my network through Ethernet using a network cable RJ45. I also plugged a keyboard and a mouse in the RPI.
- I properly removed the SD Card from my computer then plugged it in my RPi 3 B+
- I then plugged the Power supply to my RPI 3b+ and it started well. Red light for power and Green flashing light for booting.
- I can see the 4 raspberries on top of my booting screen but then...
This is when the trouble comes. On my Booting screen I have some failure. I had many failure so I read a lot in this forum to try to find some fix. I changed the config.txt file by adding gpu_mem_1024=512. It seems to have remove some failure but I still have the following issue on my booting screen.
[ Failed ] Failed to activate swap / var / swap
[ Dependency ] Failed for swap
[ OK ] I have a bunch of 'OK' lines
[ OK ] Starting Realtek H5 bluetooth support...
[ OK ] Started Realtek H5 bluetooth support.
[ OK ] Stopped Realtek H5 bluetooth support.
[ Failed ] Failed to start Realtek H5 bluetooth support.
I also used to have :
[ Failed ] Failed to start a high performance web server and a reverse proxy server
see 'systemct1 status tinker-bluetooth.service' for details
But this one has been gone for an unknown reason on my last try (I changed the gpu_mem_1024 before trying a new reboot maybe that's why)
Despite some Failed lines in the booting screen, I still managed to get to the RPI login and password prompt, but if I enter the login and password, it seems to work enough to get to this error and then asking me again for login and password :
Last login: Sun May 12 18:18:34 UTC on tty1
RASPBERRYPI 3
Welcome to ARMBIAN 5.46 experimental Debian GNU/Linux 9 (stretch) 4.14.34-v7+
Systeme Load: 0.33 0.28 0.11
Memory usage: 12% of 495MB
CPU temp : 38 C
Usage of /: 18% of 7.2G
Up Time: 1 min
IP : My.Nas.IP.Address
Raspberry Pi is a slow NAS: https://forum.openmediavault.org/index.php/Thread/19871
New to Armbian ? Check the documentation first : https://docs.armbian.com
No directory, logging in with HOME=/
This account is currently not available.
openmediavault 4.1.7 (Arrakis) raspberrypi tty1
Copyright (C) 2009-2018 by Volker Theile. All rights reserved.
To manage the system visit the openmediavault web control panel :
My.Nas.IP.Address
...
raspberrypi login:_
Alles anzeigen
I don't understand why I have this error : No directory, logging in with HOME=/ This account is currently not available.
I tried to access to the web control panel and it WORKS. I can log in with admin/openmediavault and navigate through the webUI, but I keep having trouble every time I try an upgrade or checking action.
i.e: When I go to the Update Management section and hit the 'Check' Button I have this error popping :
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; apt-get update 2>&1' with exit code '139': Segmentation fault
Details:
Error #0:
OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; apt-get update 2>&1' with exit code '139': Segmentation fault in /usr/share/openmediavault/engined/rpc/apt.inc:220
Stack trace:
#0 /usr/share/php/openmediavault/rpc/serviceabstract.inc(565): OMVRpcServiceApt->{closure}('/tmp/bgstatuslg...', '/tmp/bgoutputPD...')
#1 /usr/share/openmediavault/engined/rpc/apt.inc(224): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))
#2 [internal function]: OMVRpcServiceApt->update(NULL, Array)
#3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#4 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('update', NULL, Array)
#5 /usr/sbin/omv-engined(536): OMV\Rpc\Rpc::call('Apt', 'update', NULL, Array, 1)
#6 {main}
Alles anzeigen
When I try to Upgrade or Edit a service/plugin I don't have the pop up window that is supposed to open to show you the progression of the action, and it does nothing.
PART 2 below...