on my first post you'll find an "EDIT" about the epg (the other files in the repo...).
tvheadend binaries
-
-
Zitat von "TheCondor"
I will try to compile the git, should works. A plugin isn't necessary imho, tvh needs of its gui and the plugin should replicates that completely... It's a big work and we already have a gui. I think at ma se can ask for put the binaries in the official omv repo!
Is a new GUI necessary?
Why not a Plugin and show the Original GUI in OMV?
Perhaps is it easier to install tvheadend as Plugin, i mean
the Plugin install tvheadend and the scripts what you need -
Even though some plugins have the option to show a website inside OMV I'm not as a plugin developer particularly fond of (or approves of) iframes and would suggest against it. You could always make a simple tvheadend plugin with an enable box, but what's the point? tvheadend is dead simple to install and configure when there's packages available.
-
-
installation on wheezy is ok, but somes scripts are needed.
eg autostart script, restart script after standby, perhaps epg script .....it was only a idea.
-
Hm.. if you build it yourself it yourself look after debian/tvheadend.init. Then edit the DAEMON variable in it to be correct. Copy it to /etc/init.d/tvheadend and enable it
-
and that is easier as a installation with a good omv plugin?
i think after the trouble with the installation on OMV 0.5, I'll get it under 1.0.
it was only a idea, for other guys..... -
-
No it's not easier, but if you build it yourself I guess you could figure that out too. When you install the real package things like automatic start is provided by it
-
Hi all,
Do you think it's possible to install tvheadend on OMV O.6 ?
Thanks -
https://tvheadend.org/projects/tvheadend/wiki/AptRepository
Do this:
Codeecho "deb http://apt.tvheadend.org/stable wheezy main" > /etc/apt/sources.list.d/tvheadend.list wget -q -O - http://apt.tvheadend.org/stable/repo.gpg.key | apt-key add - apt-get update apt-get install tvheadend
or as a oneliner -
-
Thanks for you quick answer.
I install, but i have no access to the tvheadend web page. I have another problem to solve
-
perhaps this help
stop tvheadend and start with
tvheadend -Cnow you should connect with your browser: IP:9981
add a new user under access control -
Hi thanks for your idea, but always the same nothing on the port 9981.
Code
Alles anzeigenmai 30 13:29:42.719 [WARNING]:access: Created default wide open access controle entry mai 30 13:29:42.832 [ INFO]:charset: 71 entries loaded mai 30 13:29:42.832 [ INFO]:dvb: Found adapter /dev/dvb/adapter0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver) via USB (480 Mbit/s) mai 30 13:29:42.834 [ INFO]:CSA: Using SSE2 128bit parallel descrambling mai 30 13:29:42.834 [ INFO]:epggrab: module eit created mai 30 13:29:42.834 [ INFO]:epggrab: module uk_freesat created mai 30 13:29:42.834 [ INFO]:epggrab: module uk_freeview created mai 30 13:29:42.835 [ INFO]:epggrab: module viasat_baltic created mai 30 13:29:42.841 [ INFO]:epggrab: module opentv-skyit created mai 30 13:29:42.841 [ INFO]:epggrab: module opentv-ausat created mai 30 13:29:42.842 [ INFO]:epggrab: module opentv-skyuk created mai 30 13:29:42.843 [ INFO]:epggrab: module pyepg created mai 30 13:29:42.844 [ INFO]:epggrab: module xmltv created mai 30 13:29:42.847 [ INFO]:dvr: Creating new configuration '' mai 30 13:29:42.847 [WARNING]:dvr: Output directory for video recording is not yet configured for DVR configuration "". Defaulting to to "/root". This can be changed from the web user interface. mai 30 13:29:42.848 [ NOTICE]:START: HTS Tvheadend version 3.4.27~gfbda802~wheezy started, running as PID:4919 UID:0 GID:0, settings located in '/root/.hts/tvheadend' mai 30 13:29:43.848 [ INFO]:AVAHI: Service 'Tvheadend' successfully established.
-
-
The problem is that you must be running that command as the user running tvheadend. IIRC the user is hts. So instead do this:
Connect to the webgui and add a user. Stop tvheadend with ctrl-c and then continue with the following commands:
Hope it worksEdit: Fixed order in service command
-
i have exactly the same.
I create a user "hts" with password "hts" but same result
-
I had to try it myself. And you should not need to do what is written in my last message since that is done at install.
However, when using Firefox I receive a blank page with a 401 unauthorized status. It doesn't show any basic auth form. If I try Chrome the correct login form shows and it works. So I'd suggest trying another browser for the time being I haven't pinned down where the issue stems from.
-
-
Thanks you, i confirm it's work with chrome.
On my side with safari and firefox, i have nothing. -
Have anyone problems with the sound of recordings? Ask few seconds I've no sound. I had try passthrough and mkv, both the same
-
Zitat von "noxx"
Have anyone problems with the sound of recordings? Ask few seconds I've no sound. I had try passthrough and mkv, both the same
I have no problem with 'same ad suorce' and latest xbmc on android. What's you client?
-
-
A Cubox.
-
As far as i know the cubox has a very low cpu speed, could be the problem. What OS are you running in that? Try with xbmc in your desktop pc or Mac.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!