Cron does not log anything, so the shell command you're executing needs to be take care about that.
THX for the reply. But there must be a space to store the current output, or not?
I dont know how often this could happen in another scenario out there. I just found no solution for that. So I thought: Why did you just not try to ask the omv community.
Hey there.
I start a shred of an 1 tb usb-3.0 hdd. Because I did not know the screen binary/cmd before, I start this with a cron from the omv web-interface.
The cron was started succesfully but the main problem is that I want to know the output at the moment.
Try to search in different /var/log/ files but can not found anything.
I know it is a special question but: Is there a place where the output is collected for a running cron?
Would be great to see more than the blinking hdd-led. Would be great to be able to estimate the hours it will take 
Alles anzeigenIt seems that somebody got debian on that NAS540 to run!
See here: http://l.unchti.me/2016/02/12/debian-nas540.html
I would so nice if we can run openmediavault on this NAS-System.
The 5.11 FW is really bad. Not 100% bad but not a really nice software work. Old librarys, some security issues, slow update support.
Let us see what we can do, then we can write a good nooby how-to and ask for donation and the end and at the beginning.
I had some soldering skills, own a nas540 and i am free to test something out. (Jes, with risk of bricking this peace of SW sh*t
Greetings by EtwasNAS
Juhuuu...
2 chances to bring full OMV to the nas540:
UPDATE: http://l.unchti.me/2016/02/12/debian-nas540.html
&
http://www.zyxelforum.de/debia…oder-sd-karte-t11232.html
Hope find some time for that the next weeks!
Greetings by EtwasNAS
Es gibt auch noch diese Möglichkeit:
https://l.unchti.me/2016/02/12/debian-nas540.html
Benjamin hat es endlich geschafft sein How-To zu vollenden...
Gruß EtwasNAS
Zitat von ryecoaaron: „If you can get Debian Wheezy on it, then you probably can use OMV. You will need a serial adapter and this isn't easy.“
It seems that somebody got debian on that NAS540 to run!
See here: <a href="http://l.unchti.me/2016/02/12/debian-nas540.html" class="externalURL" rel="nofollow" target="_blank">l.unchti.me/2016/02/12/debian-nas540.html</a>…
THX for your reply.
The site I mentioned was not a full tutoiral...
But I wrote the guy from this site (mittagessen Ääääht l.unchti.me).
Here is his github page: https://github.com/mittagessen
Hey just wrote me that I am the 2nd guy who asked about a tutorial 
And a short tut:
Zitatwrite from stockfirmware the bootloader-config and kernel into the NAND and boot the System from the SD-Card
Can you help me with that a bit?
Greetings by EtwasNAS
Can nobody help with the prevoius infos?
If you can get Debian Wheezy on it, then you probably can use OMV. You will need a serial adapter and this isn't easy.
It seems that somebody got debian on that NAS540 to run!
See here: http://l.unchti.me/2016/02/12/debian-nas540.html
I would so nice if we can run openmediavault on this NAS-System.
The 5.11 FW is really bad. Not 100% bad but not a really nice software work. Old librarys, some security issues, slow update support.
Let us see what we can do, then we can write a good nooby how-to and ask for donation and the end and at the beginning.
I had some soldering skills, own a nas540 and i am free to test something out. (Jes, with risk of bricking this peace of SW sh*t )
Greetings by EtwasNAS
