Hello, I noticed that I have a lot of RX packet errors whilst in the process of setting up a static IP address
Code
root@Lilith:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:1e:c9:d4:d7:9e
inet addr:192.168.1.106 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:161746794 errors:2885733 dropped:0 overruns:0 frame:2964375
TX packets:116095573 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:234456429031 (218.3 GiB) TX bytes:24641030952 (22.9 GiB)
Interrupt:16
root@Lilith:~# ethtool -S eth0 | grep -i errors
rx_fcs_errors: 2948533
rx_align_errors: 15842
rx_frame_too_long_errors: 0
rx_in_length_errors: 0
rx_out_length_errors: 0
tx_mac_errors: 0
tx_carrier_sense_errors: 0
tx_errors: 0
rx_errors: 2885733
root@Lilith:~# netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 1500 0 161766862 2885733 0 0 116149880 0 0 0 BMRU
lo 65536 0 765906 0 0 0 765906 0 0 0 LRU
root@Lilith:~# ethtool ethX
Settings for ethX:
Cannot get device settings: No such device
Cannot get wake-on-lan settings: No such device
Cannot get message level: No such device
Cannot get link status: No such device
No data available
Alles anzeigen
Any advice on this would be great.