It works fine in my test VM with the 4.7 kernel. Might have something to do with your nvme/uefi setup. Not sure though.
I agree... At the moment, I will stop further testing.
Beiträge von wittihome
-
-
Cloning to nvme drive doesn't work.
Different errors by creating the partition table and so on...The only way to work with omv, is to install Omv 3 on Debian 8 in UEFI mode.
If there is a way to install omv 3 with UEFI enabled, a direct installation of omv 3 could be possible.
-
After some failed installations, now all works fine.
Thanks for the hint with another browser. In Edge, VirtualBox could be opened and after clearing cache in chrome too.VirtualBox only runs with 3.16 Kernel.
With 4.7 I get the same error how I described in my first post. -
The config.php looks exactly like the one you posted
-
I have completely reinstalled OMV 3 on Debian 8.
Then, I installed only omv-extras package and virtualbox.Now it's possible to activate VirtualBox, but when I start phpVirtualBox, I get the following error message:
Same issue on Kernel 3.16 and 4.7
-
First I installed vbox from the gui. Later I tried a manual install.
I tried installations from 3.16 and 4.7 Kernel. Nothing works. -
Thanks, I will try it.
-
I have partitoned the NVME drive and use only 20GB for OS.
I will not waste a SATA port for OS.Here is the result from journalctl -xn
Code
Alles anzeigenroot@OMVNAS:~# journalctl -xn -- Logs begin at Do 2016-10-20 22:42:06 CEST, end at Di 2016-10-25 18:36:10 CEST Okt 25 18:36:10 OMVNAS systemd[5709]: Starting Timers. -- Subject: Unit UNIT has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has begun starting up. Okt 25 18:36:10 OMVNAS systemd[5709]: Reached target Timers. -- Subject: Unit UNIT has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has finished starting up. -- -- The start-up result is done. Okt 25 18:36:10 OMVNAS systemd[5709]: Starting Sockets. -- Subject: Unit UNIT has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has begun starting up. Okt 25 18:36:10 OMVNAS systemd[5709]: Reached target Sockets. -- Subject: Unit UNIT has finished start-up lines 1-23...skipping... -- Logs begin at Do 2016-10-20 22:42:06 CEST, end at Di 2016-10-25 18:36:10 CEST. -- Okt 25 18:36:10 OMVNAS systemd[5709]: Starting Timers. -- Subject: Unit UNIT has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has begun starting up. Okt 25 18:36:10 OMVNAS systemd[5709]: Reached target Timers. -- Subject: Unit UNIT has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has finished starting up. -- -- The start-up result is done. Okt 25 18:36:10 OMVNAS systemd[5709]: Starting Sockets. -- Subject: Unit UNIT has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has begun starting up. Okt 25 18:36:10 OMVNAS systemd[5709]: Reached target Sockets. -- Subject: Unit UNIT has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has finished starting up. -- -- The start-up result is done. Okt 25 18:36:10 OMVNAS systemd[5709]: Starting Basic System. -- Subject: Unit UNIT has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has begun starting up. Okt 25 18:36:10 OMVNAS systemd[5709]: Reached target Basic System. -- Subject: Unit UNIT has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has finished starting up. -- -- The start-up result is done. Okt 25 18:36:10 OMVNAS systemd[5709]: Starting Default. -- Subject: Unit UNIT has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has begun starting up. Okt 25 18:36:10 OMVNAS systemd[5709]: Reached target Default. -- Subject: Unit UNIT has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit UNIT has finished starting up. -- -- The start-up result is done. Okt 25 18:36:10 OMVNAS systemd[5709]: Startup finished in 6ms. -- Subject: System start-up is now complete -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- All system services necessary queued for starting at boot have been -- successfully started. Note that this does not mean that the machine is -- now idle as services might still be busy with completing start-up. -- -- Kernel start-up required KERNEL_USEC microseconds. -- -- Initial RAM disk start-up required INITRD_USEC microseconds. -- -- Userspace start-up required 6572 microseconds. Okt 25 18:36:10 OMVNAS systemd[1]: Started User Manager for UID 0. -- Subject: Unit user@0.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit user@0.service has finished starting up. -- -- The start-up result is done. -
FYI: this is my Mainboard https://www.supermicro.nl/prod…on/C236_C232/X11SAE-M.cfm and I use this M.2 device: Intel® 600p 128 GB, Solid State Drive
Nope. OMV 2.x does not work on Debian 8.
I have installed OMV 3 on Debian 8 and it works
The core of my Question is. Is it possible to move an installation of OMV 2 from one drive to another?
-
Hi,
currently I have installed OMV 3 on Debian 8, because I have a NVME drive.
OMV 2 and Debian 7 can't detect the drive and OMV 3 shows grub error.
With this guide (http://www.poweredbyjeff.com/2…750-SSD-in-Debian-Jessie/), I could install Debian 8 and later OMV 3I feel not so happy with the installation,because of some errors and OMV 3 ist still in testing.
I prefer a stable environment.When I install OMV 2 on a normal HDD, is it possible to move the installation later (after all updates are installed and NVME drive will be detected) to the NVME drive and remove the HDD?
If yes, could someone write me a short guide.Thanks in advance
Marco -
Hi,
I have installed OMV3 on Debian 8 because I use a NVME drive.
A normal install of OMV 3 is not posible because of a grub install bug.
I used this manual to install Debian 8: http://www.poweredbyjeff.com/2…750-SSD-in-Debian-Jessie/After complete install, I installed OMV 3.
All works fine except VirtualBox.
On installation I get some warnings:Code
Alles anzeigenReading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libcrypt-openssl-random-perl libcrypt-passwdmd5-perl makepasswd phpvirtualbox virtualbox-ext-pack-installer The following NEW packages will be installed: libcrypt-openssl-random-perl libcrypt-passwdmd5-perl makepasswd openmediavault-virtualbox phpvirtualbox virtualbox-ext-pack-installer 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/2818 kB of archives. After this operation, 15.1 MB of additional disk space will be used. Selecting previously unselected package libcrypt-openssl-random-perl. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 68177 files and directories currently installed.) Preparing to unpack .../libcrypt-openssl-random-perl_0.04-2+b1_amd64.deb ... Unpacking libcrypt-openssl-random-perl (0.04-2+b1) ... Selecting previously unselected package libcrypt-passwdmd5-perl. Preparing to unpack .../libcrypt-passwdmd5-perl_1.3-10_all.deb ... Unpacking libcrypt-passwdmd5-perl (1.3-10) ... Selecting previously unselected package makepasswd. Preparing to unpack .../makepasswd_1.10-9_all.deb ... Unpacking makepasswd (1.10-9) ... Selecting previously unselected package phpvirtualbox. Preparing to unpack .../phpvirtualbox_5.0-5-2_all.deb ... Unpacking phpvirtualbox (5.0-5-2) ... Selecting previously unselected package virtualbox-ext-pack-installer. Preparing to unpack .../virtualbox-ext-pack-installer_5.0.16_all.deb ... Unpacking virtualbox-ext-pack-installer (5.0.16) ... Selecting previously unselected package openmediavault-virtualbox. Preparing to unpack .../openmediavault-virtualbox_3.0.5_all.deb ... Unpacking openmediavault-virtualbox (3.0.5) ... Processing triggers for man-db (2.7.0.2-5) ... Processing triggers for openmediavault (3.0.48) ... Restarting engine daemon ... Setting up libcrypt-openssl-random-perl (0.04-2+b1) ... Setting up libcrypt-passwdmd5-perl (1.3-10) ... Setting up makepasswd (1.10-9) ... Setting up phpvirtualbox (5.0-5-2) ... Setting up virtualbox-ext-pack-installer (5.0.16) ... converted 'http://download.virtualbox.org/virtualbox/5.0.16/Oracle_VM_VirtualBox_Extension_Pack-5.0.16.vbox-extpack' (ANSI_X3.4-1968) -> 'http://download.virtualbox.org/virtualbox/5.0.16/Oracle_VM_VirtualBox_Extension_Pack-5.0.16.vbox-extpack' (UTF-8) --2016-10-25 14:04:48-- http://download.virtualbox.org/virtualbox/5.0.16/Oracle_VM_VirtualBox_Extension_Pack-5.0.16.vbox-extpack Resolving download.virtualbox.org (download.virtualbox.org)... 2.21.78.35, 2.21.78.33 Connecting to download.virtualbox.org (download.virtualbox.org)|2.21.78.35|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 16896587 (16M) [text/plain] Saving to: '/tmp/Oracle_VM_VirtualBox_Extension_Pack-5.0.16.3QpnR5kDhR.vbox-extpack' /tmp/Oracle_VM_Virt 0%[ ] 0 --.-KB/s tmp/Oracle_VM_Virtu 4%[ ] 711.30K 3.06MB/s mp/Oracle_VM_Virtua 8%[> ] 1.41M 3.24MB/s p/Oracle_VM_Virtual 10%[=> ] 1.64M 2.57MB/s /Oracle_VM_VirtualB 16%[==> ] 2.58M 3.04MB/s Oracle_VM_VirtualBo 25%[====> ] 4.15M 3.95MB/s racle_VM_VirtualBox 32%[======> ] 5.28M 4.22MB/s acle_VM_VirtualBox_ 39%[=======> ] 6.41M 4.42MB/s cle_VM_VirtualBox_E 46%[=========> ] 7.53M 4.56MB/s le_VM_VirtualBox_Ex 53%[==========> ] 8.67M 4.68MB/s e_VM_VirtualBox_Ext 60%[============> ] 9.79M 4.78MB/s _VM_VirtualBox_Exte 67%[=============> ] 10.93M 4.85MB/s VM_VirtualBox_Exten 74%[===============> ] 12.06M 4.92MB/s M_VirtualBox_Extens 81%[=================> ] 13.19M 4.97MB/s _VirtualBox_Extensi 88%[==================> ] 14.32M 5.02MB/s VirtualBox_Extensio 95%[====================> ] 15.45M 5.06MB/s eta 0s /tmp/Oracle_VM_Virt 100%[=====================>] 16.11M 5.08MB/s in 3.2s 2016-10-25 14:04:52 (5.08 MB/s) - '/tmp/Oracle_VM_VirtualBox_Extension_Pack-5.0.16.3QpnR5kDhR.vbox-extpack' saved [16896587/16896587] WARNING: The character device /dev/vboxdrv does not exist. Please install the virtualbox-dkms package and the appropriate headers, most likely linux-headers-amd64. You will not be able to start VMs until this problem is fixed. 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% Successfully installed "Oracle VM VirtualBox Extension Pack". Setting up openmediavault-virtualbox (3.0.5) ... WARNING: The function 'omv_config_add_element' is deprecated. WARNING: The function 'omv_config_add_element' is deprecated. WARNING: The function 'omv_config_add_element' is deprecated. WARNING: The function 'omv_config_add_element' is deprecated. Processing triggers for openmediavault (3.0.48) ... Updating locale files ... Updating file permissions ... Purging internal cache ... Restarting engine daemon ... Creating index of upgradeable packages ... Creating index of openmediavault plugins ... Fertig ...When I try to start the plugin, I get this error:
Code: Failed to execute command export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; systemctl start virtualbox-web 2>&1 with exit code 1: A dependency job for virtualbox-web.service failed. See journalctl -xn for details.
Alles anzeigenFehler #0: exception 'OMV\ExecException' with message 'Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; systemctl start virtualbox-web 2>&1' with exit code '1': A dependency job for virtualbox-web.service failed. See 'journalctl -xn' for details.' in /usr/share/php/openmediavault/system/process.inc:175 Stack trace: #0 /usr/share/php/openmediavault/system/systemctl.inc(83): OMV\System\Process->execute(Array, 1) #1 /usr/share/php/openmediavault/system/systemctl.inc(101): OMV\System\SystemCtl->exec('start', NULL, false) #2 /usr/share/openmediavault/engined/module/virtualbox.inc(107): OMV\System\SystemCtl->enable(true) #3 /usr/share/openmediavault/engined/rpc/config.inc(189): OMV\Engined\Module\VirtualBox->startService() #4 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(124): call_user_func_array(Array, Array) #6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(150): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array) #7 /usr/share/php/openmediavault/rpc/serviceabstract.inc(528): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatusbx...', '/tmp/bgoutputXj...') #8 /usr/share/php/openmediavault/rpc/serviceabstract.inc(151): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure)) #9 /usr/share/openmediavault/engined/rpc/config.inc(208): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array) #10 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #11 /usr/share/php/openmediavault/rpc/serviceabstract.inc(124): call_user_func_array(Array, Array) #12 /usr/share/php/openmediavault/rpc/rpc.inc(84): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array) #13 /usr/sbin/omv-engined(516): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1) #14 {main}
Latest updates are installed (OMV 3.0.48, omv extras 3.4.3)Thanks for your help.
Marco