hello,
I'm very sorry for my english.
I am a first time poster.
Congratulation for this system, it's very goog.
I'm new to OMV and Linux in general. So I have made an installation with some tutorials.
It was ok and the NAS was 100% fonctionnaly with FTP, SMB, NFS and Bittorrent.
The version is 2.2.13 (stone burner), CPU Pentium Dual-core E5200.
Yesterday i have tried to install OSCam manually with putty :
I used a tuto to install OSCam on debian :
Code
apt-get update
apt-get install build-essential
apt-get install libssl-dev libpcsclite-dev
apt-get install mercurial cvs subversion libncurses-dev
apt-get install cmake
mkdir /var/bin
svn co http://www.streamboard.tv/svn/oscam/trunk oscam
cd oscam
make config (I choose my config)
You have selected the following components:
Add-ons:
WEBIF : on
WEBIF_LIVELOG : on
WEBIF_JQUERY : on
TOUCH : on
WITH_SSL : off
HAVE_DVBAPI : on
READ_SDT_CHARSETS : on
IRDETO_GUESSING : on
CS_ANTICASC : on
WITH_DEBUG : on
MODULE_MONITOR : on
WITH_LB : on
CS_CACHEEX : on
CW_CYCLE_CHECK : on
LCDSUPPORT : off
LEDSUPPORT : off
CLOCKFIX : on
IPV6SUPPORT : off
Protocols:
MODULE_CAMD33 : off
MODULE_CAMD35 : on
MODULE_CAMD35_TCP : on
MODULE_NEWCAMD : on
MODULE_CCCAM : on
MODULE_CCCSHARE : on
MODULE_GBOX : on
MODULE_RADEGAST : on
MODULE_SCAM : on
MODULE_SERIAL : on
MODULE_CONSTCW : on
MODULE_PANDORA : on
MODULE_GHTTP : on
Readers:
READER_NAGRA : on
READER_IRDETO : on
READER_CONAX : on
READER_CRYPTOWORKS : on
READER_SECA : on
READER_VIACCESS : on
READER_VIDEOGUARD : on
READER_DRE : on
READER_TONGFANG : on
READER_BULCRYPT : on
READER_GRIFFIN : on
READER_DGCRYPT : on
Card readers:
CARDREADER_PHOENIX : on
CARDREADER_INTERNAL : on
CARDREADER_SC8IN1 : on
CARDREADER_MP35 : on
CARDREADER_SMARGO : on
CARDREADER_DB2COM : on
CARDREADER_STAPI : on
CARDREADER_STAPI5 : on
CARDREADER_STINGER : on
CARDREADER_DRECAS : on
cmake -DWEBIF=1 -DHAVE_DVBAPI=1And there is an error :
Code
root@openmediavault:/usr/src/oscam-svn/oscam# cmake -DWEBIF=1 -DHAVE_DVBAPI=1 -- The C compiler identification is GNU 4.7.2
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Looking for pthread.h
-- Looking for pthread.h - found
-- pthread found. Adding pthread support
-- Looking for openssl/aes.h
-- Looking for openssl/aes.h - found
-- SSL IS NOT INCLUDED IN THIS COMPILATION
CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:263 (list):
list GET given empty list
Call Stack (most recent call first):
CMakeLists.txt:239 (find_package)
CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:264 (list):
list GET given empty list
Call Stack (most recent call first):
CMakeLists.txt:239 (find_package)
CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:266 (list):
list GET given empty list
Call Stack (most recent call first):
CMakeLists.txt:239 (find_package)
CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:268 (list):
list GET given empty list
Call Stack (most recent call first):
CMakeLists.txt:239 (find_package)
-- Found OpenSSL: /usr/lib/x86_64-linux-gnu/libssl.so;/usr/lib/x86_64-linux-gnu/ libcrypto.so (found version ".0.0`")
-- openssl found.
-- Looking for time.h
-- Looking for time.h - found
-- librt found (needed by libusb).
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - found
-- libusb 1.0 found (libusb-1.0.so) Adding smartreader support
-- Looking for PCSC/wintypes.h
-- Looking for PCSC/wintypes.h - found
-- PCSC headers found (/usr/include/PCSC). Adding PCSC support
HOSTCC webif/pages_gen
GEN webif/pages.c
GEN Compressed 432712 template bytes into 176941 bytes. 255771 saved bytes ( 59.11%).
-- The CXX compiler identification is GNU 4.7.2
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Utils: operating system: Linux
-- Utils: target system: x86_64-linux-gnu
-- utils use system libusb functions
--
--
-- operating system: Linux
-- target system: x86_64-linux-gnu
-- revision: 11350
-- use system libcrypto functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb functions
--
-- Configuring incomplete, errors occurred!So now I have 2 problems : How can I install OSCam without errors ?
And second problem, OMV Shuts Down Randomly When Not In Use.
How can I repair OMV ?
Very, very sorry for my english....
I hope somebody can help me.
Thank you very much for your patience !