Beiträge von mike011292

  • Extreme slow Networkspeed

    Hello Joshua,


    as written above it´s all wired with Cat6 Ethernet. Of course I started the NAS more than one time. I also tried in the meantime an Samba-Server on Rasbian without OMV, but there is also the same effect.


    Thats why i am thinking that the "Problem maker" isnt the Nas, it´s the Client (Win 10) maybe an worth update?


    Dont forget: It had already worked fine with an good speed!

  • Extreme slow Networkspeed

    I have already turned it off and try to copy files, but this is not the problem.


    The transfer time doesnt speed up.


    #EDIT


    Sorry I have seen your first post now.


    24GB is nothing. Bevore friday i already transfered 500GB of Data from this PC on the NAS without a Problem. All these Data were big, and lot of them were small like these Photos.


    It´s clear that a copy/write speed is slower with a lot of small files like Photos, but it had already worked with these files.


    And for the problem:


    It´s indifferent if you copy 1GB or 1MB it´s happend at the first KB´s . I have an "Testfile" next to the pictures too.


    This files is 500MB "big" and contains one pic, one movie, one textfile and nothing going to the nas. The NAS only shows the Folder and the files, but you cant open it from the NAS

  • Extreme slow Networkspeed

    I have got an Win 10 Update, but this was yesterday or today morning.


    No, i have from my PC a Ethernet Cat 6 to my Router and then a Ethernet Cat6 from the router to the NAS.


    I have also tried new Cables because i thought one is dead...


    I have really no idea why this is struggling now :(


    I will try smb3 now.


    Thank you for Support!


    #EDIT


    I have tried smb3 now. At beginning it starts with 500kb/s up to 1000 kb/s but then it frezzes at 11,1kb/s after that "Freeze" it ends at 0kb/s (Picture1) and after 30 Seconds The Copy freezes Complete (Picture2). I am starting to think its an Win Problem.

  • Extreme slow Networkspeed

    I have put this in the Options at the Samba Tab:


    Code
    min protocol = SMB2
max protocol = SMB2
max xmit = 65535
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=65535 SO_RCVBUF=65535
read raw = yes
write raw = yes
max connections = 65535
max open files = 65535


    Now I get this on Win 10 when I am trying to transfer files :

    Code
    Fehler 0x8007003B: Unerwarteter Netzwerkfehler


    I dont get it why this slow traffic speed happens only since Friday? I havent change anything...

  • Extreme slow Networkspeed

    Hello!


    Thanks for your reply.


    I have done these two Threads now and a full Network reset on Win10 now.


    The speed is now at 300kb/s for the first 30 seconds, then a drop to 0kb/s and after this drop it goes up to 30kb/s until the Copy Window gets freeze again.


    Best regards!


    #EDIT:


    I have on this Nas two Share-Folders. The First called "Daten" for Files who have this Problems i wrote above. The second "Medien" have a Networkspeed between 100kb/s and 450 kb/s but without these Drops and Freezes.

  • Extreme slow Networkspeed

    Hello Guys!


    I am using OMV 2.2.13 with Kernel "Linux 4.4.13-v7+" on an Raspberry Pi 3 B. My Computer have Windows 10 Version 1607 Build 14393.1066


    Since Friday i only have a network speed under 100KB/s and thats really slow :P Before Friday I had an Speed about 1MB/s which was ok because I have only an 100MB Connection.


    Sometimes when I am trying to copy a File, the "Copy-Window" from Win 10 breaks down and i lost the Connection. (But i can open the Server in Explorer)


    I have tried this Post "http://forum.openmediavault.org/index.php/Thread/17673-network-problem/" but it didnt help me.


    Have you got furture ideas?

  • OMV-Extras Plugin "autoshutdown" cant find

    Hello WastlJ andryecoaaron,


    I have already a button to shutdown the pi. Its right that i have to reconnect the power cable to restart it later. Thats not a Problem so far.


    The autoshutdown plugin from OMV-EXTRAS put the HDD in an "sleepingmode" after an preset time and restart the hdd when I need Data from the HDD. OR?


    Now I would like to build this feature as an phyton file and this file should automatic start on startup (/ect/rc.local)

  • OMV-Extras Plugin "autoshutdown" cant find

    Hello,


    I have installed OMV 3.0.46 Erasmus and installed the file "openmediavault-omvextrasorg_latest_all.deb" but i can't find the file openmediavault-autoshutdown to install it.


    First I thought it isn't available for this Version of OMV but on the Website of OMV-Extras.org it is.


    Can I manually download and install it over console?


    If yes, how?


    Thanks a lot!