Beiträge von betupet

thank you,
I changed permission as you wrote, error from

INSECURE MODE (group/other writable) (/etc/cron.d/armbian-updates)

dissapeared, but still comes emails with : log2ram exited with return code 1

any idea?

thx

Hi,
from last updates od OMV 3 3.094, kernel 4.9.61-odroid-xu4, it sends email once a day with this message:

log2ram exited with return code 1

with no other messages. I search logs and did not found anything exept:

cron[1399]: (*system*armbian-updates) INSECURE MODE (group/other writable) (/etc/cron.d/armbian-updates)

repeating 6 times every cca 10 mins , mayby it is another issue.

please any idea about source of this errors?
thank you

Thank you Sc0rp and tkaiser,
I remake whole omv from start. I am now not using RAID, I will try to setup some Rsyns job. I change USB sata to another chip brand which works fine. Now everything looks ok, except SMART vaules, but it is a problem of WD RED disks, I receive some counters increments by mail every day, but this is not to post to this thread.
thx all

Hi,
here is output http://sprunge.us/aGJY but this is config on same hw but without raid enabled, one disk is not inicialised yet. Tbank you for your help, I read the link about fw of Jmicron, but I think I do not have this issue about spindown, I do not know if fw of Jmicron can be updated, sorry I am only user with limited skill and knowledge, but still trying to build something. thank you

Hi thank you for quick response, I used emmc card to store system on it, I move only mysql database outside to HDD, I install Flashmemory plugin,
So please witch hw you suppose to use to put 2 HDD inside and have raid1? I have only usb ports on odroidxu4 (no sata). when I build raid, config was written to files, but after it dissapears (I think it was during system up, after restart it did not came up at all, I have checked configs but raid was gone. so I decide to use only one hdd now and second hdd will be synced with RSnaphot, to make some redundancy (backup) in data.
Only one tnink it freaks my out is that I see same serials on hdd

Hi
I have the same problem, I have odroid Xu4 with 2x usb to sata bridge boards http://www.hardkernel.com/main….php?g_code=G145197048960 and 2x 2TB HDD RED, I have created RAID, and after one day of working, after moving some files on it and rebooted, whole raid dissapeard. I have tried to follow some quides, but it looks that it lost config, in blklid I see the disks that are member of array, but in mdadm.conf was nothing and also in /etc/openmediavault/config.xml it loast raid definition. I have tried some steps without succes. I reinstall whole omv and make make disks separate, it looks like sw RAID1 has some real issues.
Only proble I see is that in web interface hdd are identified by serial number readed from sata to usb bridge and not from serial of HDD itself (for example I turn on SMART monitor on sda, it automatically turn on also on sdb, maybe this is another issue tu post it on separate list)
thank you for advices