Beiträge von popoeo

Sorry i followed that guide but i can't resolve.

It seems a problem of docker.

Can u help me?

Hi all, i have the login loop poblem, but i don't know how to clean root disk.

Any suggestion?

thx very much

File system Dim. Usati Dispon. Uso% Montato su

udev 3,8G 0 3,8G 0% /dev

tmpfs 779M 2,7M 777M 1% /run

/dev/sdb2 109G 104G 0 100% /

tmpfs 3,9G 0 3,9G 0% /dev/shm

tmpfs 5,0M 0 5,0M 0% /run/lock

tmpfs 3,9G 0 3,9G 0% /tmp

/dev/sdb1 511M 6,1M 505M 2% /boot/efi

/dev/sda1 3,6T 1,7T 1,9T 48% /srv/dev-disk-by-uuid-29e87996-f75b-4df1-b0d3-2935daec36a2

overlay 109G 104G 0 100% /var/lib/docker/overlay2/469e7cfcc74d3968bd76bfb34cb20d4735c108a4de49b3b4628ad337369f0246/merged

overlay 109G 104G 0 100% /var/lib/docker/overlay2/9191b02a8d4e5007e905a5252224c7704b719e30283ad31fa0c4a4c7ce30561a/merged

overlay 109G 104G 0 100% /var/lib/docker/overlay2/0c85d1ed389d02ba28e480ebdeb1e57f185aa11737e178cdaf38eb36b261c317/merged

Sorry for the delay,

no motherboard has a single NIC.

It is very curious.

It almost seems that some user connected to the electrical system does not comply with the electromagnetic compatibility standards.

Hi all, a curious case: OMV6 machine on q1800 motherboard (J1900 processor), regularly updated.

The server is at my in-laws' house.

Yesterday I noticed, by chance, that the server was losing connection at regular and relatively close intervals (every 3-4 minutes), for 5-10 seconds, then it reconnects.

I ruled out it was an ethernet cable issue, so the cause could be either the modem or the server's network card.

I tend to exclude the modem, because the desktop pc (windows 10) connected to the same network works well and is stable in navigation, so everything leads me to the server's network card.

These are lan specifics on the server:

Interface information enp2s0:
=============================
Settings for enp2s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: d
Link detected: yes
--------------------------------------------------------------------------------
Driver information enp2s0:
==========================
driver: r8169
version: 6.1.0-0.deb11.5-amd64
firmware-version: rtl8168g-2_0.0.1 02/06/13
expansion-rom-version:
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

I enclose also logfiles.

messages(2).txtsyslog(2).txt

in the last line of the "messages" log, my (failed) attempt to limit the problem is detected by using the command:

ethtool -s enp2s0 speed 1000 duplex full autoneg off

It is very frustrating, I would really appreciate if someone could help me.

Thank u very much.

Hi all,

after a brutal shutdown of my OMV 5 (power failure) , after server (it is a x64 pc) restarting, I can connect via SSH and to the portainer interface but when I try to log into OMV I get the following error:

502 Bad Gateway

nginx

I lunched: sudo omv-salt deploy run phpfpm

with this result (2 errors on phpfpm):

I then launched systemctl status php7.3-fpm.service:

Then I launched journalctl -xe

--

How can i repair the webpanel?

Thank u very much

Hi all,
i installed OMV 3.x (debian on a core duo machine.

Installed mpd, configured it by this guide (https://www.htpcguides.com/cre…d-music-server-on-debian/), but there's no sound.

It's strange because on a twin machine i installed OMV 4.x (debian 9) and it works perfectly.

The aplay -l command gives this result:

root@OMV:/etc# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: ALC663 Digital [ALC663 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0

Sound card seems to be working.

This is an exctract from my mpd.conf.

# An example of an ALSA output:
#
audio_output {
type "alsa"
name "My ALSA Device"
# device "hw:0,0" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional

Someone could help me?

I was so happy to connect my OMV to my 70s amplier....

Installed on an x86 machine, with debian 8.10 + OMV.

All ok.

Very beautiful openmediavault, i'm spreading it!

Thank u very much

Hi raulfg3,
thank u anyway for the support.

I resolved then, it was a problem related the user wich used to edit the file (sorry it was as you suggest in /var/lib/mldonkey ... wrong writing!).
I was with my user, so rebooted and logged with root.
All ok.

Thank u very much!

Hi everybody, here again for another nightmare fight with mldonkey (god bless them).

Sempron 3000 x86 machine.

Installed debian 8.10

Installed OMV 3.0.95 by your guide Install OMV3 on Debian Jessie

All ok.

Try to install mldonkey with your guide [HOWTO] Install mldonkey-server on OMV to download ed2k links

NIGHTMARE!

mldonkey-server service is active, but in /etc/var/mldonkey there's nothing but only downloads.ini file (with only 3 rows... totally incomplete).

What's wrong?

Thank u very very much for your support. It's very important for me, because if i'll be able to build this machine i will replicate it on more or less 20 P4 and donate them. A beautiful trashwware project!

Sorry for the delay in replying raulfg3, I was trying to prepare an OMV install with mldonkey on a pine64, but it was too instable for me and abandoned the project.
Now i'm trying to install it on a x86 machine, another nightmare.

If u can help me i open another thread.

Thank u very much!

Tried: modified downloads.ini, stopped service then started.

It doesn't work.

Any other suggestion?

Thank u very much!

I hope it will be possible to access, even if i'm forced to uninstall everything and use different OS.

Why OMV doesn't have a mldonkey plugin?

Hi all,
i've installed on OMV (pine64 version) mldonkey using your guide at this address:
[HOWTO] Install mldonkey-server on OMV to download ed2k links

The problem is that it can't connect to core from my desktop pc, i tried everything.
This is my downloads.ini config. It seems all ok. I have no omv firewall rules.

(* list of IP address allowed to connect to the core via telnet/GUI/WEB
          for internal command set: list separated by spaces
          example for internal command: set allowed_ips "127.0.0.0/8 192.168.1.2"
          or for editing the ini-file: list separated by semi-colon
          example for ini-file: allowed_ips = [ "127.0.0.0/8"; "192.168.1.2";]
          CIDR and range notations are supported: ie use 192.168.0.0/24
          or 192.168.0.0-192.168.0.255 for 192.168.0.* *)
 allowed_ips = [
  "127.0.0.1";
  "192.168.1.0/254";
  "192.168.3.0/254";]

Someone could help me please?

Thank u very much.