Beiträge von Seb

Just to inform you..
After some days I got a new HC1 and the Issue was still present. (some Pages back in this subject)
[no IP request; blinking blue LED]
thank to TKaiser!

My last try was to replace (the new) SD Card with a different one (from my mobile)...
And ... This one is working perfectly... (and flashing in the same way)..
IP was requested.. OMV is now working fine!
cool stuff.

Now I play around with Plex and miniDLNA...
Searching only a good "Gallery for android "
I Rsynch only PICs to the HC1 that should be searchable and fast browse able.

Plex look not to bad.. But I don't like the external Auth. (and the Andorid App need a plex pass)
miniDLNA with Bubble App is ok but Image rotation and speed is not that good...
Owncloud still need to test..

Any suggestions what is worth a look?

Thank you very much!
hm I try this one (don't know if this is the correct one:)
https://oph.mdrjr.net/meveric/…4-20171121-XU3+XU4.img.xz

it also start flashing blue but also do not request any IP at DHCP.
There is a FAT Partition on the SD Card called boot.
no ext4 Part.

I also try this:
https://dl.armbian.com/odroidxu4/Debian_jessie_next.7z
but reboot without IP request.

no USB / ETH Dongle available.
And I don't have such a serial adapter for the Board

If I attach a HDD it's spinning on at the time the blue light flashing (2/3 per sec flashing)

I see do following options:
- Image do not have the correct NIC driver?
- NIC of the hc1 have an Hardware Issue
- I am stupid (what can be and doing something wrong

Is ther a way without the Serial Consol to get Information out of it?
(booting wit a Linux and check some log's)

otherwise I will send it back to Pollin.

Thank you for the fast response!
I used another Cable -> same Issue
I used another Port on the Switch (fritzbox) -> same Issue
I used a testnetwork with just a Router and PC -> same Issue
I config the Switch port to use only 100mbit (then the led turn green on HC1) -> same Issue

direct cabel between HC1 and PC nothing in wireshark.
try to mount the SD Card on the MAC (but I think the Filesystem is not supported; hoped to see some logs)
I was able to see two Partitions on the Card (67 MB and 860MB..)

Hm I running out of Idea's

Good morning!
yesterday i got my new HC1. But I did not manage to boot it correct.

- I use Etcher to flash "OMV_3_0_92_Odroidxu4_4.9.61.img.xz" to a 16GB (new) SD Card (1x time flashed with my Mac , 1x time with win7)
- try to boot. Blue light is flashing; after some time it stop flashing ... and it boot again.
- on DHCP Server and with Networksniffer I was not able to see any IP
- Network Link is amber
- I also try "Armbian_5.37_Odroidxu4_Ubuntu_xenial_next_4.9.71" (same Issue)
Any Ideas how I can troubleshoot without a screen?
(sorry for my bad Eng)