EDIT: Nevermind, problem solved by flashing the sd card again... (or maybe the odroid's sd card slot has bad contacts?). Anyway, it works now.
Hello!
I just signed up since I have a similar problem with my Odroid HC1 with OMV3.0.92_Odroidxu4.
The board turns on, the blue LED lights up. After a few seconds, the LED goes out, then flashes shortly 3-4 times, then the process repeats from the beginning. Yellow Ethernet LED lights up solid and flashes only 2-3 times.
It does not seem to be a hardware issue!
My hardware runs perfectly fine if I use armbian's image.
- OMV image checksum was correct, I used dd on the img file inside the archive. Did not try etcher yet.
- Power should suffice, measured 5.05V (when HC1 was not connected) - and I did not attach a HDD yet.
- LAN cable is fine, works on a Raspberry PI.
- SD card is fine, as I said, it works with armbian.
I also do not have a serial cable. Is there anything I can do to find out what's wrong with the OMV image?
Thank you,
elvenbone