Hello everyone, first of all, i would like to thanks all active members on this forums, i has helped me a lot already, but i have one more issue i cannot seem to work around, there it is:
Only one of my 2Gb DDR3 Stick is detected by the system (they appear in BIOS fine (8Gb Total))
I'm Running OMV 3.0.99 Erasmus
My current config is :
Mobo: Asrock 970Rev2.0 + FX 4100 BE
Ram: 1*4Gb stick + 2*2 Gb Sticks
Cg: 760GTX
HDD: Hitachi 7200 164Gb (OMV) + (3*1To+2*2To) Data
I have already perform:
-Fresh install
-Switch Ram module
-New Ram modules
-Upgrade for test, same result, going back to 3.0.99
-Bios Update
-Clear CMOS
There we have some output:
dmidecode -t memory
Code
root@Vault:~# dmidecode -t memory
# dmidecode 2.12
SMBIOS 2.7 present.
Handle 0x000E, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0010, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: A1_DIMM0
Bank Locator: A1_BANK0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 1333 MHz
Manufacturer: Kingston
Serial Number: 923A2042
Asset Tag: A1_AssetTagNum0
Part Number: 99U5474-016.A00LF
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0012, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A1_DIMM1
Bank Locator: A1_BANK1
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 1333 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: A1_AssetTagNum1
Part Number: CMX4GX3M2A1600C9
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0014, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A1_DIMM2
Bank Locator: A1_BANK2
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 1333 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: A1_AssetTagNum2
Part Number: CMX4GX3M2A1600C9
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0016, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A1_DIMM3
Bank Locator: A1_BANK3
Type: Unknown
Type Detail: Synchronous
Speed: Unknown
Manufacturer: A1_Manufacturer3
Serial Number: A1_SerNum3
Asset Tag: A1_AssetTagNum3
Part Number: Array1_PartNumber3
Rank: Unknown
Configured Clock Speed: Unknown
free -m
Code
root@Vault:~# free -m
total used free shared buffers cached
Mem: 1960 1639 320 8 154 988
-/+ buffers/cache: 496 1463
Swap: 4003 3 4000
If Someone find an answer to this, please let me know it would be awesome.
Thanks