hello
I would like to set up an iSCSI target on 2 esxi 5.5 to my nas OMV .
my nas OMV has two network interface :
vlan 2 use it on my 2 esxi for the use of storage in vm on my nas iscsi . ( 192.168.22.18-19 my host esxi )
except I can not see a target on my esxi .
I ping well the different interfaces.
I try to target the first and second ip same result.
how can do to iscsi parameter as an interface?
thank you
hello
resolue i reinstall the plug in Iscsi it's ok
i same probleme or
i execute this command :
apt-get install module-assistant debhelper build-essential > OK
m-a a-i iscsitarget > NOK
error :
root@srv-san:~# m-a a-i iscsitarget
Données de 1 paquets mises à jour
Récupération des sources du noyau de la version : 3.2.0-4-686-pae
En-têtes du noyau disponibles dans /lib/modules/3.2.0-4-686-pae/build
Création du lien symbolique...
apt-get install build-essential
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
build-essential est déjà la plus récente version disponible.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Fait.
unpack
The source tarball could not be found!
Package iscsitarget not installed?
Running "m-a -f get iscsitarget" may help.
"/usr/share/modass/packages/default.sh" build KVERS=3.2.0-4-686-pae KSRC=/lib/modules/3.2.0-4-686-pae/build KDREV=3.2.63-2 kdist_image
find: "/usr/src/modules/iscsitarget*": Aucun fichier ou dossier de ce type
my kernel :
root@srv-san:~# uname -r
3.2.0-4-686-pae
version omv : 1.0.29
thx
Hello there
OMV I use and I have a eon server for monitoring.
check out the linux base does not work.
the server is UP ping OK
I see the snmp trap via a snmpwalk.
I configure with snmp V2 omv public community.
t have it there in particular Nagios check?
thank you in advance.
slynas2
Perform Extra Host Actions
interfaces
Perform Extra Service Actions
CRITICAL 17:53:08 38d 21h 49m 58s 4/4 #1 (Service Check Timed Out)
memory
Perform Extra Service Actions
UNKNOWN 17:51:04 38d 21h 49m 24s 4/4 ERROR: netsnmp : No response from remote host '192.168.1.248'.
partitions
Perform Extra Service Actions
UNKNOWN 17:51:40 38d 21h 48m 49s 4/4 ERROR: General time-out (Alarm signal)
processor
Perform Extra Service Actions
UNKNOWN 17:52:17 38d 21h 48m 15s 4/4 ERROR: Description table : No response from remote host '192.168.1.248'.
systime
UNKNOWN 17:52:53 38d 21h 47m 41s 4/4 Timeout: No Response from 192.168.1.248.
uptime
This service is currently executing its servicecheck
UNKNOWN 17:49:30 38d 21h 47m 7s 4/4 (No output returned from plugin)
it's ok
I uninstall and reinstall the package nut
thank you
root@slynas2:~# service nut status
Checking status of Network UPS Tools
upsd is running.
upsmon is running.
root@slynas2:~#
same thing
The drivers is intalled :
root@slynas2:~# locate usbhid-ups
/lib/nut/usbhid-ups
or :
root@slynas2:~# upsc -L
Error: Connection failure: Connection refused
root@slynas2:~#
root@slynas2:~# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13fe:3600 Kingston Technology Company Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@slynas2:~#
same problème
driver=usbhid-ups
port=auto
error message in service/ups
Erreur #4000:
exception 'OMVException' with message 'Failed to execute command 'sudo upsc ups 2>&1': Error: Driver not connected' in /var/www/openmediavault/rpc/nut.inc:133
Stack trace:
#0 [internal function]: NutRpc->getStats(NULL)
#1 /usr/share/php/openmediavault/rpc.inc(265): call_user_func_array(Array, Array)
#2 /usr/share/php/openmediavault/rpc.inc(98): OMVRpc::exec('Nut', 'getStats', NULL)
#3 /var/www/openmediavault/rpc.php(44): OMVJsonRpcServer->handle()
#4 {main}
hello
I have an APC UPS connected via usb smartups 750
I also installed the plug-in nut.
when I active services / UPS
I show the following options:
[Ups]
driver = usbhid-ups
port = auto
but I have an error message:
Error # 4000:
exception 'OMVException' with message 'Failed to execute command' sudo UPSC ups 2> & 1 ': Error: Driver not connected' in / var / www / openmediavault / rpc / nut.inc: 133
Stack trace:
# 0 [internal function]: NutRpc-> getStats (NULL)
# 1 / usr / share / php / openmediavault / rpc.inc (265): call_user_func_array (Array, Array)
# 2 / usr / share / php / openmediavault / rpc.inc (98): OMVRpc :: exec ('Nut', 'getStats', NULL)
# 3 / var / www / openmediavault / RPC.php (44): OMVJsonRpcServer-> handle ()
# 4 {main}
when I did a dmesg on the server I see my UPS to connect:
[4067.551331] generic-usb 0003:051 D: 0002.0003: hiddev0, hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 750 FW: 651.13.I USB FW: 7.3] on usb-0000: 00:1 d.2 -1/input0
[5992.576050] usb 4-1: USB disconnect, address 4
[6029.424017] usb 2-2: new low speed USB device using uhci_hcd and address 2
[6029.672054] usb 2-2: New USB device found, idVendor = 051D, idProduct = 0002
[6029.672059] usb 2-2: New USB device strings: Mfr = 3, Product = 1, SerialNumber = 2
[6029.672063] usb 2-2: Product: Smart-UPS 750 FW: FW 651.13.I USB: 7.3
[6029.672067] usb 2-2: Manufacturer: American Power Conversion
[6029.672070] usb 2-2: SerialNumber: AS0806220977
[6029.672208] usb 2-2: configuration # 1 chosen from 1 choice
