nächstes problem, die funktion dass, das nas durch drücken des an/ausschalter am Gehäuse runterfährt geht nicht, obwohl die funktion angeschaltet ist im webinterface
bekannter bug oder liegt das wieder nur an meiner kiste ?
Beiträge von meiersas
-
-
@ tekkbebe
yeah@ davidh2k
kein Problem, das USB Sticks für OMV nicht gut sind hab ich schon damals gelesen -
ist eine 2,5" 320gb platte von toshiba
-
ja, wenn es nochmal passiert geh ich mal per ssh drauf und schaue
Prozessor ist derzeit eine celeron G1610 mit 2x 2,6Ghz, 4GB RAM sowie 4x 3 TB platten. Sollte also von der Leistung für einfaches jbod, also jede platte einzelnd ohne raid dicke reichen.installiert hab ich das ganze frisch von der iso, also kein update sondern komplett neu.
@ tekkbebe
yea, i was confused, the other webinterface was soo fast -
ja, das ist mir klar wie man aktualisiert, aber es dauert teilweise echt 5 minuten bis er das übernommen hat
-
Hallo zusammen,
ich bitte zu entschuldigen das ich deutsch schreibe, aber mein Englisch ist nicht gerade das beste
Ich hoffe ihr versteht alles und könnt mir helfen.Ich habe mir heute OMV 0.5 auf mein Nas gemacht ( komplett mit der ISO ), dazu dann das Update auf 0.58 per Update Manager.
Ich hab aber mit 0.5 bzw 0.58 nur probleme, von ewigkeiten warten bis er Änderung Übernommen hat ( grüner kreis bzw das neue update zeichen ) bis ausfälle vom Webinterface die mich zum neustarten zwingen.
Bei OMV 0.4 hatte ich keinerlei dieser probleme, die frage ist daher woran das liegt, die hardware die ich habe hat ja vorher super gepasst, und nun nicht mehr ? -
Zitat
unlink(/tmp/omv-initfs@_dev_sdd.build): Datei oder Verzeichnis nicht gefunden
again this message after i have purchased and installed a new HDD, but everything runs fine :o
-
jop, only once
in my vm this message is not there, but in my fresh installed machine the message comes only once afert the first creating in the Filesystems tab, but everything runs fineHardware on my Machine is:
Asus P8H77-I
Celeron G1610
8GB A-Data Ram, DDR3-1333 Mhz
3x 3TB WD Green WD30EZRX
1x 320gb 2,5" Toshiba System HDD -
the error pops up after i create sdc1
in German:
die Meldung habe ich bekommen als ich eine Platte unter "Filesystems" erstellt habe, die Meldung kommt aber nur einmalig und es läuft derzeit auch alles. ich habe also zugriff auf die Platte -
its
file_get_contents(/tmp/omv-initfs@_dev_sdc.build): failed to open stream: Datei oder Verzeichnis nicht gefunden -
works perfect, big thx
last question that i have at the moment
i have OMV fresh installed, i add the HDD as an ext4 and a error messege poped up, but all works fine ?!
any idea what this is ? -
again thanks
can you tell me which filesystem is the best ? on my box, is the transfer speed on xfs faster than ext4 ( about 10mb/s more )
i have no raid, only just each disk alone -
thank you for your answers
is there any filesystem that i can use on OMV and that reserved not so much gigs? -
ok, thx for that
on my 3TB HDD only 2,55TB for data are free, normally its 2,72TB so 160gb are used for the ext4 Partition ? -
Hey OMV Fans,
first, sorry for my bad english, but it is not my first/native language
second, OMV looks awesome, good work so thx for itnow my questions:
- i have installed OMV on my machine, and all works great, but the "update manager" task provided me some entries
i use OMV only as a NAS for my mediaplayer and windows PC, so is it recommend to update all ?
- my WD 3TB disks formatted as ext4 are shown as 2,69TB normaly its 2,72TB ( NTFS ) but only 2,55Tb are provided/free is this normal ?thanks for answering
best regards