Beiträge von cracksilver

MacBook is in perfect condition. I just reinstall OMV now from DVD no problems right now

Looking forward to use it again....

cracksilver

Hi there

I can't do it because the notebook is gone The CPU is over I think. After a few minutes I get Kernel Panic Message. I don't think that's a good base for a Homeserver.

Today I bought a MacBook (2008) for 50$ and will try OMV again as soon it is here

Thank you all
cracksilver

here the output:

root@omv:~# systemctl status nginx
● nginx.service - A high performance web server and a reverse proxy server
   Loaded: loaded (/lib/systemd/system/nginx.service; enabled)
   Active: active (running) since Don 2018-10-18 17:03:31 CEST; 12min ago
  Process: 2532 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
  Process: 2537 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
  Process: 2536 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
 Main PID: 2540 (nginx)
   CGroup: /system.slice/nginx.service
           ├─2540 nginx: master process /usr/sbin/nginx -g daemon on; master_pr...
           ├─2541 nginx: worker process
           ├─2542 nginx: worker process
           ├─2543 nginx: worker process
           └─2544 nginx: worker process


Okt 18 17:03:31 omv systemd[1]: Failed to read PID from file /run/nginx.pid: ...nt
Okt 18 17:03:31 omv systemd[1]: Started A high performance web server and a r...r.
Hint: Some lines were ellipsized, use -l to show in full.

and

root@omv:~# systemctl status php5-fpm
● php5-fpm.service - The PHP FastCGI Process Manager
   Loaded: loaded (/lib/systemd/system/php5-fpm.service; enabled)
   Active: active (running) since Don 2018-10-18 17:07:35 CEST; 10min ago
  Process: 2718 ExecStartPre=/usr/lib/php5/php5-fpm-checkconf (code=exited, status=0/SUCCESS)
 Main PID: 2722 (php5-fpm)
   Status: "Processes active: 0, idle: 2, Requests: 25, slow: 0, Traffic: 0req/sec"
   CGroup: /system.slice/php5-fpm.service
           ├─2722 php-fpm: master process (/etc/php5/fpm/php-fpm.conf)
           ├─2725 php-fpm: pool www
           └─2726 php-fpm: pool www


Okt 18 17:07:35 omv systemd[1]: Started The PHP FastCGI Process Manager.

Hi again

i can't believe that. After install plex plugin same problem as I this thread started. No access to web-gui. just a blank site.

Doing all this stuff doesn't help:

root@omv:~# omv-mkconf nginx
root@omv:~# omv-mkconf php5fpm
root@omv:~# systemctl restart nginx
root@omv:~# systemctl restart php5-fpm

any idea?

Thank you macom

With this cron after Update - "stdin: is not a tty" it works well.

cracksilver

Hi all

After doing nothing over the weekend (I went away) I have to say it works great. Access to Web-GUI still works and all syncs has done automaticly.

Only mailmessage I got every morning is the follow:

/etc/cron.daily/openmediavault-cron-apt:
stdin: is not a tty

Whatever it means...

cracksilver

good morning

Yes, it is an old laptop I gave a new live for my music storage. I'm replacing my old synology (DS16+) with this. I know i's an old one, but it is the only thing I can do. Desktop is too slow on it.

By the way, I made some copies tonight. The server is now running fine, including the web-gui.

Thank you, have a good day.
cracksilver

Last night installed OMV with iso over USB Stick. openmediavault_3.0.36-i386 with option forcepae

After check Web-GUI did all updates, upgrades and dist-upgrades in terminal.
Now it looks like this:

today i just installed this one and configurated some backups:

... and see, it works again.

Thank you very much for solving my problem. But where or what was the problem? Is this version of OMV not stable enough? I did realy nothing complex with this server. Just copied a few bis iso files around....

root@omv:~# omv-mkconf nginx
root@omv:~# omv-mkconf php5fpm
root@omv:~# systemctl restart nginx
root@omv:~# systemctl restart php5-fpm

looks like php problem:

root@omv:~# omv-mkconf php-fpm
ERROR: The script '/usr/share/openmediavault/mkconf/php-fpm' does not exist
root@omv:~# systemctl restart nginx
root@omv:~# systemctl restart php7.0-fpm
Failed to restart php7.0-fpm.service: Unit php7.0-fpm.service failed to load: No such file or directory.

here we go:

root@omv:~# systemctl status php7.0-fpm
● php7.0-fpm.service
   Loaded: not-found (Reason: No such file or directory)
   Active: inactive (dead)

nginx status gave me this one:

root@omv:~# service nginx status
● nginx.service - A high performance web server and a reverse proxy server
   Loaded: loaded (/lib/systemd/system/nginx.service; enabled)
   Active: active (running) since Fre 2018-10-12 00:44:40 CEST; 1min 7s ago
  Process: 2908 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
  Process: 2911 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
  Process: 2910 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
 Main PID: 2915 (nginx)
   CGroup: /system.slice/nginx.service
           ├─2915 nginx: master process /usr/sbin/nginx -g daemon on; master_process on;
           ├─2916 nginx: worker process
           ├─2917 nginx: worker process
           ├─2918 nginx: worker process
           └─2919 nginx: worker process


Okt 12 00:44:40 omv systemd[1]: Failed to read PID from file /run/nginx.pid: Invalid argument
Okt 12 00:44:40 omv systemd[1]: Started A high performance web server and a reverse proxy server.

i don't think so..

root@omv:~# df -h /


Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf
/dev/sda1        15G    1,5G   13G   11% /

Hi there

Just wondering is this a general problem with web-gui or just a problem of my constellation. After I set it up today in the mornig, everything was fine and running well. Made some users and shares, copy some bigger files to test. Buuum web-gui is gone!! Delete browser cache, rebooted, change port and tried everything out. No chance at all... login as root over SSH is fine.

This ist the log:

Last login: Thu Oct 11 23:59:12 2018 from 192.168.1.179


root@omv:~# tail -n 25 /var/log/nginx/openmediavault-webgui_error.log


2018/10/11 08:21:33 [error] 927#0: *317 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: ::ffff:192.168.1.150, server: openmediavault-webgui, request: "POST /rpc.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm-openmediavault-webgui.sock:", host: "192.168.1.130", referrer: "http://192.168.1.130/"


2018/10/11 08:21:34 [crit] 927#0: *317 connect() to unix:/var/run/php5-fpm-openmediavault-webgui.sock failed (2: No such file or directory) while connecting to upstream, client: ::ffff:192.168.1.150, server: openmediavault-webgui, request: "POST /rpc.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm-openmediavault-webgui.sock:", host: "192.168.1.130", referrer: "http://192.168.1.130/"

But there are errors from today morning time....

Someone ideas?

thanks in advance
cracksilver

Are you kidding me? I can't believe that was the problem, but now it works!!! Just started OMV in ingkognito mode and see it works....

Thank you very much. Nice community here

grego

Hi there

I'm new here.

Last night installed OMV with iso over USB Stick. openmediavault_3.0.36-i386 with option forcepae

After check Web-GUI did all updates, upgrades and dist-upgrades in terminal.

First I made a new user test. Then I tried to make shares with the following error:

I now there are some threads with similar errors but not exactly this. I don't know exactly in which config file I have to change things. Can someone help me please with this workaround?

actual System:

Thank you in advance.

cracksilver