Hi All,
Hopefully a quick one,
Under SMART
I want to know the difference for the 'check interval time' under the main settings page and setting up of a 'Scheduled test'.
If i set a interval check time, does this run a short SMART test?
Additonally if I setup a Scheduled test, do I have to 'run' to enable the scheduled test?
Thanks.
Mr Geaves
Thank goodness! I had to first use the command [mdadm --stop /dev/md127]
Before that it did say: /dev/sdd is busy - skipping
mdadm: Found some drive for an array that is already active: /dev/md/Raid5
mdadm: giving up.
I almost did the same as mdadm above :O
Lesson learned the hard way for me, backups and watch the boy!
Thank you soo much for your help!
Hello OMV forum
Today I moved my OMV machine and thought to give it a clean at the same time. Before doing so I booted it to check moving it had caused no problems up and tucked it out the way (so i thought) Unfortunately leaving the case open and on my nephew decided to investigate and in the few moments I was not looking pulled the Sata cables out the drives 
I was running x4 2TB drives in Raid 5.
Basically now its saying in the logs: mountpoint_srv_dev-disk-by-label-NAS' status failed (1) -- .srv/dev-disk-by-lable-NAS in not a mountpoint
I've tried following other forum results to no avail 
Is this salvageable? it looks like I'm missing a mdadm.conf perhaps?
Any help would be greatly appreciated. Thanks!
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md127 : inactive sda[0](S) sdb[1](S) sdd[3](S) sdc[2](S)
7813534048 blocks super 1.2
unused devices: <none>
blkid
/dev/sdb: UUID="f88aab93-ea45-ef37-07cb-eae4d6f4bc3e" UUID_SUB="88445cb1-7a58-0600-afc0-04c29105d30d" LABEL="NAS-2:Raid5" TYPE="linux_raid_member"
/dev/sda: UUID="f88aab93-ea45-ef37-07cb-eae4d6f4bc3e" UUID_SUB="ed145d12-c3a6-87e0-b48f-ef14f6b7ecca" LABEL="NAS-2:Raid5" TYPE="linux_raid_member"
/dev/sdc: UUID="f88aab93-ea45-ef37-07cb-eae4d6f4bc3e" UUID_SUB="eab7d791-1f0e-2fa7-893e-df59a6ecd40f" LABEL="NAS-2:Raid5" TYPE="linux_raid_member"
/dev/sdd: UUID="f88aab93-ea45-ef37-07cb-eae4d6f4bc3e" UUID_SUB="2b3af38a-2037-3a56-5976-691c568d92f7" LABEL="NAS-2:Raid5" TYPE="linux_raid_member"
/dev/sde1: UUID="ff527af8-02e9-44ef-ab88-308ea18a0030" TYPE="ext4" PARTUUID="6a4e3222-01"
/dev/sde5: UUID="b45a694e-8dde-43b4-ac63-deffa79218c4" TYPE="swap" PARTUUID="6a4e3222-05"
fdisk -l | grep "Disk "
Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk /dev/sdc: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk /dev/sdd: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk /dev/sde: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Disk identifier: 0x6a4e3222
cat/etc/mdadm/mdadm.conf
-bash: cat/etc/mdadm/mdadm.conf: No such file or directory
root@NAS-2:~# cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
# used if no RAID devices are configured.
DEVICE partitions
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# definitions of existing MD arrays
INACTIVE-ARRAY /dev/md0 metadata=1.2 name=NAS-2:Raid5 UUID=f88aab93:ea45ef37:07cbeae4:d6f4bc3e
root@NAS-2:~#
mdadm --detail --scan --verbose
mdadm: Unknown keyword INACTIVE-ARRAY
INACTIVE-ARRAY /dev/md127 num-devices=4 metadata=1.2 name=NAS-2:Raid5 UUID=f88aab93:ea45ef37:07cbeae4:d6f4bc3e
devices=/dev/sda,/dev/sdb,/dev/sdc,/dev/sdd
root@NAS-2:~# mdadm: Unknown keyword INACTIVE-ARRAY
-bash: mdadm:: command not found
root@NAS-2:~# INACTIVE-ARRAY /dev/md127 num-devices=4 metadata=1.2 name=NAS-2:Raid5 UUID=f88aab93:ea45ef37:07cbeae4:d6f4bc3e
