Beiträge von VolKu

Good day to all.
Defeated his problem itself.
I edited the file "nut" according to their parameters in /usr/share/openmediavault/scripts/collectd.d.
The problem is that if at least one condition in the configuration does not match, then not display the graph.

with the temperature is clear. waited a day. a graph of voltage not appeared. that should be corrected?

a similar situation.
configuration of the driver:
driver = usbhid-ups
port = auto

in the "Variables" :
battery.charge: 96
battery.charge.low: 10
battery.charge.warning: 30
battery.date: 2010/01/01
battery.runtime: 1984
battery.type: PbAc
device.mfr: powercome Co.,LTD
device.model: UPS IMP--625AP FW3.A2
device.serial: 3A2-0000-0001
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.4.3
driver.version.data: Powercome HID 0.2
driver.version.internal: 0.34
input.frequency: 50.0
input.voltage: 214.0
input.voltage.nominal: 220
output.frequency: 50.0
output.voltage: 214.0
output.voltage.nominal: 220
ups.beeper.status: enabled
ups.date: 2010/01/01
ups.load: 1
ups.mfr: powercome Co.,LTD
ups.model: UPS IMP--625AP FW3.A2
ups.productid: 00a2
ups.serial: 3A2-0000-0001
ups.status: OL CHRG
ups.test.result: Done and passed
ups.vendorid: 0d9f

graphics "Charge" and "Load" displayed correctly.
graphics "Temperature" and "Voltage" in the smileys

Reboot the system and waiting not led to a positive result.
How to fix this?