Thanks a lot.
Will give this a shot tonight. I also have a 3Tb wd red to compare against, I'll install it and run the same process and see if the result is the same. This way I can rule out the disk and it for warranty if need be.
I'll get back with the results.
Hi All,
I have a bit of a strange behavior with OMV 4.1.3 . I use an old acer M1610 machine, with one 2.5" 80 GB hd for OMV and a WD Red 2Tb as storage.
I installed OMV and configured SMB with a shared folder on the WD Red. Disk is present in the section, file system present and mounted. SMB can be seen from a Windows machine. I did a test and copied a 4Gb file on it, all good.
When trying to copy the file, it does start the copy process and copies like 20mb of the file then stops. After that the disk disappears from OMV and file system is missing.
After a reboot of the system the disk is again present and file system is there.
To mention, the 2Tb is not seen on the bios but if I try to select the boot device it is seen in the boot order and can be selected.
My concern: - is this a bug in OMV? My PSU on the machine is 250W and only those two drives? Is WD underpowered and when I copy it maxs out on power?
Thank for your help.
