I followed techno dad's Youtube video to installed mate desktop. But I found I can't see files under /srv.
So how to configure it? I didn't found anything possible in control center.
I know I can use smb under network tab of file explorer, that's not what I want. I need fully accessible to /srv/ folder.
What about systemctl status nginx
I've posted another thread about this, and search to get here. https://forum.openmediavault.o…pen-omv-webUI/#post231779
My nginx service failed. I just study docker thing this afternoon, I don't know why
* nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2020-03-07 22:12:53 +08; 58s ago
Docs: man:nginx(8)
Process: 5365 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status
=1/FAILURE)
Mar 07 22:12:53 OliverOMV.home.lo systemd[1]: Starting A high performance web server and a reverse proxy server...
Mar 07 22:12:53 OliverOMV.home.lo nginx[5365]: nginx: [emerg] SSL_CTX_use_PrivateKey_file("/etc/ssl/private/openmediavault-e6d0c960-1168-40b1-9b9f-d628c3074096.key") failed (SSL: error:0909006C:PEM routines:get_name:no start line:Expecting: ANY PRIVATE KEY error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib)
Mar 07 22:12:53 OliverOMV.home.lo nginx[5365]: nginx: configuration file /etc/nginx/nginx.conf test failed
Mar 07 22:12:53 OliverOMV.home.lo systemd[1]: nginx.service: Control process exited, code=exited, status=1/FAILURE
Mar 07 22:12:53 OliverOMV.home.lo systemd[1]: nginx.service: Failed with result 'exit-code'.
Mar 07 22:12:53 OliverOMV.home.lo systemd[1]: Failed to start A high performance web server and a reverse proxy server.
It's strange. I installed ds as technodad video. And now I can't open webui. browser says ERR_CONNECTION_REFUSED.
IP was not changed. I can use protainer or any other service, just system webui refuse connection.
I tried use my phone, reboot, not work.
update: seems nothing to do with DS. I restored backup to this morning. Still can't connect to webui. Seems like net problem.
It worked.
Quotaon service fail. What does it mean? Should I care
omv has a backup plugin, it can use dd to backup your system drive. I just use it to restore installation once yesterday.
but I don't know whether it can restore MBR
I login cockpit webUI as an admin user, it shows this error.
I try to login as root, the webpage just white screen, nothing.
I can see the smart plugin is at 2017 version. Will it be updated?
I use all nvme as main storage. OMV's smart shows my system drive temperature is 255℃, this must be a bug. Both of my U.2 drive can't read any smart info, include health, read/write and temperature.
This problem won't affect daily use, but I still concern
So is there any recommendation for virtual machine？
I'm done! Everything is good now
by the way, where can I get Vbox?
I restored my system to omv4. Now I want to try again.
If I change all shares to physics drive and delete pool and union plugin, will it be ok after update?
Or I should wait you fix that migration script thing?
I removed all sharefolders from shares and mergefs from fstab.
Then I recreate some shares to physics disk. It worked. I reinstall unionfs plugin and create a pool. Filesystem and unionfs tab are working well, but I can't create shares to unionfs.
You could just change each sharedfolder to point to the new pool.
I can't. Click sharefolder tab it shows thisI know they pointing at the old pool. So is there any way bypass this to change it?
Otherwise, remove the plugin and reinstall it. Then recreate the pool.
Docker solved. Thanks.
I reinstalled union. I can't really remenber the name I used before. So I just create a pool, and I still can't open filesystem tab. Share folders not working show: Invalid RPC response
I upgraded omv refer to https://forum.openmediavault.o…?postID=219830#post219830, and TechnoDad's video from Youtube.
When I login, it pop up an error as below
There is nothing in unionfs plugin. My filesystem just gone? I can't access the normal filesystem and sharefolders either. Service tab under sys info shows FTP not running.
I can use all my folder and file from windows smb or ftp on my phone. thank god.
Docker plugin is also gone. Is that normal? I tried install docker from omv-extras. Didn't work, still no docker on the menu.
Transmission worked properly few days ago. When I download movies today, it says storage full. I checked logs, found it seems transmission is downloading files into rootfs. The root drive is full now and I can't login WebUI. How can I fix it and find those file on root?
This happens once before. I reconfigured transmission to solve it for some days. And it happened again now. I don't know why
I only have one (that is shared) on each of my OMV servers.
I did this at the beginning.But I found that seperate shares are easy to manage for many plugin or docker apps.
I'm not familiar with Linux. So shares are more like different disk on windows. I get it
On nas2 (client) I ran:
iperf3 -c nas0 -f K
I know this app. But when I run it on windows client, it says "Connection refused". What permission should I enable on server?
is this a discrete adapter(built into the motherboard) or an addon card(PCI)?
10Gb is pci-e card. 1Gb is on board.
My server has 2 adapters. The 1G connect to router for media things. The 10G SFP+ connect direct to my PC use static ip.
Server build:
Xeon E-2176G
8*2G DDR4
nvme OS drive
Intel P4502 for storage (can run 1600/1000MB/s in windows)
Win10 PC to NAS transfer:start at about 1GB/s, and drop to 300-400MB in few seconds. It stays at 300+. I've tried SMB and FTP, all the same.
NAS to PC: slower than that.
I know that smb isn't high efficiency. So is there any way to improve speed? I hope it can stable at 800MB/s+.
Here's my hardware. I use this at home for backup and Streaming.
Xeon E-2176G
2*8G DDR4
OS drive: Liteon 128G nvme
Storage drive: Intel D4502 nvme
network: 10Gb SFP+
I put my media files at wrong folders so I want to move them. I did that in windows using SMB. It pass through network, only 100MB/s. Why nvme drive and 10Gb connection act like this?
So I installed Krusader to try moving files in the NAS. Faster than PC. About 150-400MB/s. Still slow
When moving files in a same disk on windows it should instant complete. Why is slow on my nas? I can't understand the difference
