Beiträge von DevilWAH

  • RPI4 Quad says hat

    checking out this the subsystem is "block" where do people take the USB/SCSI from when they talk about updating the storage config?


    P: /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2/2-2:1.0/host1/target1:0:0/1:0:0:0/block/sdb

    N: sdb

    L: 0

    S: disk/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0

    S: disk/by-id/usb-ACASIS_Go_To_Final_Lap_1234567890123-0:0

    E: DEVPATH=/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-2/2-2:1.0/host1/target1:0:0/1:0:0:0/block/sdb

    E: DEVNAME=/dev/sdb

    E: DEVTYPE=disk

    E: MAJOR=8

    E: MINOR=16

    E: SUBSYSTEM=block

    E: USEC_INITIALIZED=13508938

    E: ID_VENDOR=ACASIS

    E: ID_VENDOR_ENC=ACASIS\x20\x20

    E: ID_VENDOR_ID=1058

    E: ID_MODEL=Go_To_Final_Lap

    E: ID_MODEL_ENC=Go\x20To\x20Final\x20Lap

    E: ID_MODEL_ID=0a10

    E: ID_REVISION=8034

    E: ID_SERIAL=ACASIS_Go_To_Final_Lap_1234567890123-0:0

    E: ID_SERIAL_SHORT=1234567890123

    E: ID_TYPE=disk

    E: ID_INSTANCE=0:0

    E: ID_BUS=usb

    E: ID_USB_INTERFACES=:080650:080662:

    E: ID_USB_INTERFACE_NUM=00

    E: ID_USB_DRIVER=uas

    E: ID_PATH=platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0

    E: ID_PATH_TAG=platform-fd500000_pcie-pci-0000_01_00_0-usb-0_2_1_0-scsi-0_0_0_0

    E: DEVLINKS=/dev/disk/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0 /dev/disk/by-id/usb-ACASIS_Go_To_Final_Lap_1234567890123-0:0

    E: TAGS=:systemd:

  • RPI4 Quad says hat

    After updating the script and storage config this is what i get. its different to with out the update but still not the right serial numbers? and there should be 4 drives...


  • RPI4 Quad says hat

    cabi


    Did you do anything else


    I tried the exact same thing and my lsusb is the same as yours


    root@raspberrypi:~# lsusb

    Bus 002 Device 002: ID 1058:0a10 Western Digital Technologies, Inc.

    Bus 002 Device 003: ID 1058:0a10 Western Digital Technologies, Inc.

    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

    Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    I did notice my serial.sh does throw some errors


    root@raspberrypi:~# . /root/serial.sh sda

    SG_IO: bad/missing sense data, sb[]: 70 00 0b 00 00 00 00 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    WD-WXH0A9963528

    root@raspberrypi:~# . /root/serial.sh sdb

    W764ZE7R

    root@raspberrypi:~# . /root/serial.sh sdc

    SG_IO: bad/missing sense data, sb[]: 70 00 0b 00 00 00 00 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    W0Q6WH0B

    root@raspberrypi:~# . /root/serial.sh sdd

    5VE0AXEC


    but in openmedia I now only see one drive and it has a serial number of ACASIS and only dev\sdd sda sdb and sdc are missing?


    Any one got any ideas?


    KERNEL=="sd*", ATTRS{idVendor}=="1058", ATTRS{idProduct}=="0a10", SUBSYSTEMS=="usb", PROGRAM="/root/serial.sh %k", ENV{ID_SERIAL}="USB-%c", ENV{ID_SERIAL_SHORT}="%c"