Beiträge von gammelobst

Hello,

thanks, but it wasn't applied during the mentioned update - but solved for me so it's ok.

It would be nice to have the possibility to set a default timeout via the WebIF. I use pxe /uefi network boot as primary boot option on all of my machines (exept the OMV-box) and so it is not so good to see the Network-Boot-Menu forever until i press enter.

And for the UEFI Network Boot:

- Place http://archive.ubuntu.com/ubun…ent/grubnetx64.efi.signed in tftp-root
- create a directory named grub
- place your grub.cfg in this dir

cya

Hi,

after testing around a bit, i found an error in "/usr/share/openmediavault/mkconf/pxe".
In line 27 it is: "PXE_CONFIG="${PXE_PATH}pxelinux.cfg/default", but it shoud be "PXE_CONFIG="${PXE_PATH}/pxelinux.cfg/default" so the config is generated is pxe/pxelinux.cfg and not pxepxelinux.cfg...

pls fix this little typo

cya

Zitat von dinge

thx i tried this

Spoiler anzeigen

Quellcode
/etc/init.d/vdr stop

cd /
wget https://launchpad.net/ubuntu/+…es/vdr_2.0.3.orig.tar.bz2
tar -xvf vdr_2.0.3.orig.tar.bz2
mv vdr-2.0.3 vdr
cd vdr/PLUGINS/src/
git clone https://github.com/FernetMenta/vdr-plugin-vnsiserver
ln -s vdr-plugin-vnsiserver vnsiserver
cd vdr-plugin-vnsiserver
make
make install
echo "192.168.0.0/24" > /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
echo "127.0.0.1" >> /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf

/etc/init.d/vdr start

when i "make" i get this errors

Spoiler anzeigen

g++ -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -shared vnsi.o bitstream.o vnsiclient.o config.o cxsocket.o parser.o parser_AAC.o parser_AC3.o parser_DTS.o parser_h264.o parser_MPEGAudio.o parser_MPEGVideo.o parser_Subtitle.o parser_Teletext.o streamer.o recplayer.o requestpacket.o responsepacket.o vnsiserver.o hash.o recordingscache.o setup.o vnsiosd.o demuxer.o videobuffer.o videoinput.o channelfilter.o status.o -o libvdr-vnsiserver.so

/usr/bin/ld: vnsi.o: relocation R_X86_64_32S against `_ZTV17cPluginVNSIServer' can not be used when making a shared object; recompile with -fPIC

vnsi.o: could not read symbols: Bad value

collect2: error: ld returned 1 exit status

make: *** [libvdr-vnsiserver.so] Fehler 1

and with "make install" this

Spoiler anzeigen

g++ -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -shared vnsi.o bitstream.o vnsiclient.o config.o cxsocket.o parser.o parser_AAC.o parser_AC3.o parser_DTS.o parser_h264.o parser_MPEGAudio.o parser_MPEGVideo.o parser_Subtitle.o parser_Teletext.o streamer.o recplayer.o requestpacket.o responsepacket.o vnsiserver.o hash.o recordingscache.o setup.o vnsiosd.o demuxer.o videobuffer.o videoinput.o channelfilter.o status.o -o libvdr-vnsiserver.so

/usr/bin/ld: vnsi.o: relocation R_X86_64_32S against `_ZTV17cPluginVNSIServer' can not be used when making a shared object; recompile with -fPIC

vnsi.o: could not read symbols: Bad value

collect2: error: ld returned 1 exit status

make: *** [libvdr-vnsiserver.so] Fehler 1

Alles anzeigen

I have the same problem - how have you solved it?

cya

Hi,

it would be nice if there were an option to change between tun/tap-mode. Is it possible to integrate in the webgui and the brigde things in the startup-scripts?

Thanks in advance

Gammelobst

Hi,

PXE Boot works good, BUT:

PXE is a little bit oldschool, nowadays it would be nice to have the possibility to also configure and use UEFI Network Boot additionally to PXE in PXE Plugin.

Just like the first option mentioned here:

https://wiki.ubuntu.com/UEFI/PXE-netboot-install

but in secure-boot style like this:

https://wiki.kubuntu.org/UEFI/SecureBoot-PXE-IPv6

So there should be an additional configuration tab for the entries in grub.cfg and the
following Note for configuration of dnsmasq:

dhcp-boot=pxelinux.0
dhcp-match=set:efi-x86_64,option:client-arch,7
dhcp-boot=tag:efi-x86_64,bootx64.efi

maybe even a usable shim as bootx64.efi and grubnetx64 as grubx64.efi in TFTP-root with a sample config in /grub and unicode.pf2 in /grub/fonts would also be nice

thanks in advance

Gammelobst

Hello,

thank you very much for this easy fix.

cya

I got a HP P800 from eBay which handles up to 16 drives. I have connected 20 data-drives to my OMV without any problems so far(four on the Mobo-controller).

cya