Beiträge von piscdi

  • RAID Missing After Re-Boot - The Sequel

    :D I'm baaaaaaaack. You, sir, are my hero. 'Thank you' just doesn't seem like enough.


    geaves, I hope you have a fantastic weekend; I will be, LOL.


  • RAID Missing After Re-Boot - The Sequel

    Hi geaves,


    After shutting down, cleaning the case and replacing the sata and power cables, the RAID has gone missing (unmounted actually); everything else is reporting normally. I did not run any BIOS checks, hoping that a simple cleaning and reboot would get me back on track, so I can't confirm the MB/chipset and other components are fine.


    Is this fixable or has my quixotic journey come to an end? System logs repeat the email message warning of no mount point.


    I have not rebooted nor tried anything on my own.


    Code
    Status failed Service mountpoint_srv_dev-disk-by-label-Raid1 

    Date:        Sat, 17 Apr 2021 09:02:16
    Action:      alert
    Host:        Server
    Description: status failed (1) -- /srv/dev-disk-by-label-Raid1 is not a mountpoint
    Code
    root@Server:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : inactive sdc[1](S) sda[4](S) sde[3](S) sdd[2](S)
      23441566048 blocks super 1.2

unused devices: <none>
root@Server:~#
    Code
    root@Server:~# blkid
/dev/sdf1: UUID="b8f86e19-3cb3-4d0a-b1e2-623620314887" TYPE="ext4" PARTUUID="79c1501c-01"
/dev/sdf5: UUID="a631ab49-ab21-4169-8352-aa1829c8a95b" TYPE="swap" PARTUUID="79c1501c-05"
/dev/sdc: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="98a8cd6c-cb21-5f16-8540-aa6c88960541" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/sda: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="cd9ad946-ea0f-65a1-a2a3-298a258b2f76" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/sdd: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="df979bad-92c3-ac42-f3e5-512838996555" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/sde: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="97feb0f7-c46c-0e05-4b6f-4c40a9448f9f" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/sdb1: LABEL="BackUp" UUID="9238bbb9-e494-487d-941e-234cad83a670" TYPE="ext4" PARTUUID="d6e47150-672f-4fb8-a57d-72c6ff0ca4ae"
root@Server:~#
    Code
    root@Server:~# fdisk -l | grep "Disk "
Disk /dev/sdf: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Disk identifier: 0x79c1501c
Disk /dev/sdc: 5.5 TiB, 6001175126016 bytes, 11721045168 sectors
Disk /dev/sda: 5.5 TiB, 6001175126016 bytes, 11721045168 sectors
Disk /dev/sdd: 5.5 TiB, 6001175126016 bytes, 11721045168 sectors
Disk /dev/sde: 5.5 TiB, 6001175126016 bytes, 11721045168 sectors
Disk /dev/sdb: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Disk identifier: 9D074D37-5C66-4B80-9C9D-9B55480833ED
root@Server:~#
    Code
    root@Server:~# mdadm --detail --scan --verbose
INACTIVE-ARRAY /dev/md0 num-devices=4 metadata=1.2 name=Server:Raid1 UUID=98379905:d139d263:d58d5eb3:893ba95b
   devices=/dev/sda,/dev/sdc,/dev/sdd,/dev/sde
root@Server:~#

  • RAID Missing After Re-Boot - The Sequel

    Bless you, my son. Oh, I've got cables hahaha. Thank you, thank you, thank you.


    I might not get to it today; too much 'on the docket'. But certainly tomorrow.


    I'll report back. I can't thank you enough for your expertise, geaves.


    Have a great weekend.

  • RAID Missing After Re-Boot - The Sequel

    Hi geaves,


    I believe these are the results of the long SMART tests; I found them in SMART/Devices/Information/Extended information . The only email I received was the following (in case you need it):


    I noticed there is no 'fingers crossed' emoji; I could use one right about now :).

    sda.txt,sdc.txt,sdd.txt,sde.txt

  • RAID Missing After Re-Boot - The Sequel

    Hi geaves,


    We've had some power blips lately, but I have a UPS to mitigate the damage (in theory, of course). But the two issues (last week and last night) seem to coincide closely with power outages. Hmmm.


    I did clean (mildly) the case with compressed air two weeks ago, maybe I loosened a connection or two. I can dig into the BIOS to see if the MB and chipset are saying anything (and the i/o SAS card); just have to attach a monitor and keyboard/mouse.


    After the long SMART tests are done.


    Once they are, do you think its okay to shut down the NAS and take a look?

  • RAID Missing After Re-Boot - The Sequel

    Thank you geaves; it may be straw, but I'm grasping for it :D. Thank you as well for sharing that my situation is anything but unique (actually, quite pedestrian by comparison); the school was very lucky to have you.


    Results of drives sda and sde follow. I had not run long SMART tests, just regularly scheduled short tests. I am running them now and they show as completing somewhere around midnight my time. I'll report results tomorrow.


    Oddly, I know I set up email notifications when I installed OMV (all are still checked), but the email server info seems to have disappeared. Never realized I was not getting emails anymore; great catch. I'll fix that when I get a functioning NAS back.


    I appreciate all your insights and help.


  • RAID Missing After Re-Boot - The Sequel

    Hi geaves,


    Sorry for the intrusion, but upon reflection (and before I do anything crazy), I'm curious why 3 out 4 drives (A and then C and D) would crap out within a week of each other when for a year and a half they hummed along just fine. I obviously have a problem, but I'm not sure where to begin. The discs look good in the GUI; could it be a corrupt OS issue (or maybe an SAS card issue)? I hate to ask, but do you have any ideas?


    OMV was my first foray into RAID, but in all my years with PCs (I started in college with an Atari 800), I've only had one disc fail (hard fail), and that was years ago. Since then, I've used/installed more than a couple of hundred drives from tapes to SSDs and built over two dozen PCs (with both Windows and Linux OSs), all were extremely reliable. But I don't know where to begin with this NAS I built.


    As an aside, I have an exact duplicate build using smaller drives (4 WD 4 TB Reds), but running Windows Server 2016 that I use for business; should I be concerned about those drives and that pool as well? Everything has been rock solid with that machine for the year it's been online, but it was with my OMV machine, too, until last week :(. My research verified WD NAS discs were pretty reliable (at the time I bought them).


    Before I begin replacing the drives and upgrading to a later version of OMV, do you have any words of wisdom as to direction? Should I continue with a RAID? My 75% disc failure rate gives me pause. Right now, I'm leaning towards my old strategy of parsing all my files over several discs and backing them up separately. As I mentioned before, I used the array for media mostly and Plex doesn't care where it gets the files, so either strategy will work. I could install five discs and go with RAID 6, but with my luck, three discs would then die ^^ . I have room for 10 discs, but c'mon, nobody needs that, hahaha.


    If there is anything you could offer, I would appreciate it. I hope you're having a good day.

  • RAID Missing After Re-Boot - The Sequel

    Made it almost a week thanks to geaves help, but, sadly, here I am again.


    RAID status is now showing "clean, FAILED", rather than missing.


    Here are the results of the initially required (ryecoarron's) inquiries as well as some of geaves' requested info from the first go-round. I scanned discs C and D as they showed (to my novice eye) issues with reporting (faulty).


    Again, my set up is/was RAID5 with (4) 6 TB WD Red discs. And I haven't rebooted since discovering this last night. Any help is most appreciated.

    Code
    root@Server:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sda[4] sdc[1](F) sde[3] sdd[2](F)
      17581174272 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [U__U]
      bitmap: 3/44 pages [12KB], 65536KB chunk

unused devices: <none>
root@Server:~#
    Code
    root@Server:~# blkid
/dev/sdf1: UUID="b8f86e19-3cb3-4d0a-b1e2-623620314887" TYPE="ext4" PARTUUID="79c1501c-01"
/dev/sdf5: UUID="a631ab49-ab21-4169-8352-aa1829c8a95b" TYPE="swap" PARTUUID="79c1501c-05"
/dev/sdb1: LABEL="BackUp" UUID="9238bbb9-e494-487d-941e-234cad83a670" TYPE="ext4" PARTUUID="d6e47150-672f-4fb8-a57d-72c6ff0ca4ae"
/dev/sde: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="97feb0f7-c46c-0e05-4b6f-4c40a9448f9f" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/sdc: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="98a8cd6c-cb21-5f16-8540-aa6c88960541" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/sdd: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="df979bad-92c3-ac42-f3e5-512838996555" LABEL="Server:Raid1" TYPE="linux_raid_member"
/dev/md0: LABEL="Raid1" UUID="0f1174dc-fa73-49b0-8af3-c3ddb3caa7ef" TYPE="ext4"
/dev/sda: UUID="98379905-d139-d263-d58d-5eb3893ba95b" UUID_SUB="cd9ad946-ea0f-65a1-a2a3-298a258b2f76" LABEL="Server:Raid1" TYPE="linux_raid_member"
root@Server:~#
    Code
    root@Server:~# mdadm --detail --scan --verbose
ARRAY /dev/md0 level=raid5 num-devices=4 metadata=1.2 name=Server:Raid1 UUID=98379905:d139d263:d58d5eb3:893ba95b
   devices=/dev/sda,/dev/sdc,/dev/sdd,/dev/sde
root@Server:~#

  • RAID Missing After Re-Boot

    Zitat

    "I have never seen non existent entries before"


    That's me, trendsetter for any and all disasters :D. Seriously, I thought there might be hope because in your first response, you referenced Scotty, not Spock. The logical Spock would have run an ROI on my situation and moved on. But Scotty......, Scotty always got the job done, no matter how dire the situation. You sir, are Scotty. And I thank you.


    As I said, my critical files (docs, pics, music) were safe, but you are more than correct to suggest a better overall backup strategy for my media and OS. I have begun the planning.


    Thank you again, geaves. Have a great weekend.

  • RAID Missing After Re-Boot

    Giddy (giddy, I tell ya') with anticipation, I mapped the drive and took a look.


    :thumbup::thumbup::thumbup::thumbup:


    THANK YOU, GEAVES. It all seems to be there.


    As I stated at the outset, this was my first post, so forgive me when I ask this, but how can I appropriately thank you?

  • RAID Missing After Re-Boot

    Hi geaves,


    I've got my fingers crossed; everything looks 'normal'. I have not rebooted nor dared to map the drive to take a look :). Here are the results from your two commands:


    Code
    root@Server:~# omv-mkconf mdadm
update-initramfs: Generating /boot/initrd.img-4.19.0-0.bpo.9-amd64
update-initramfs: Generating /boot/initrd.img-4.19.0-0.bpo.8-amd64
root@Server:~#
    Code
    root@Server:~# update-initramfs -u
update-initramfs: Generating /boot/initrd.img-4.19.0-0.bpo.9-amd64
root@Server:~#

  • RAID Missing After Re-Boot

    Hi geaves,


    I opted for the quick format and the rebuild is at 2%. I know its getting late there, so I wanted to thank you for all your help. I will comply with your instructions and report back tomorrow.


    Again, I can't thank you enough. Have a nice evening.

  • RAID Missing After Re-Boot

    Not to be obtuse, but my options at wipe are 'secure' and 'quick'. By 'short' did you mean quick or did spell check change it?

    I'm sure it really doesn't matter, but this close to the finish line, I really don't want to take chances.

  • RAID Missing After Re-Boot

    Hi geaves,


    This looks promising, I think. GUI shows array as mounted but degraded.