Alles anzeigenI justed typed in "nano spindown.sh"
got it starting by "bash spindown.sh"
my output:
root@Pi:~# bash spindown.sh
Putting the disk sda into standby...
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Checking the status of sda.
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Drive is still in standby. Sleeping 45 seconds...
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Drive is still in standby. Sleeping 45 seconds...
it does this 7 times, then im back to root@Pi
I know this topic is old but I have similar message:
sudo hdparm -C /dev/sdb
/dev/sdb:
SG_IO: bad/missing sense data, sb[]: f0 00 01 00 50 00 ff 0a 00 00 00 00 00 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
drive state is: unknown
I know my disk do not spindown (I hear spinning all the time...). I already tried configuration in openmediavault but its not helping. My config in OMV5:
Storage>Disk>/dev/sdb
- Advanced Power Management: 64 - Intermediate power usage with standby
- Automatic Acoustic Management: Disabled
- Spindown time: 5 minutes (tried 30 min but i dont want to wait to long...)
- Write cache: disabled
Storage>S.M.A.R.T.>Settings
- Enable: on
- Check interval: 360 (for testing)
Storage>S.M.A.R.T.>Devices
- /dev/sdb Monitor: enabled
Can someone pls give me advice about this problem? Disk in new HDD 3,5'' WD Elements 10TB connected by USB.