I think something was broken. By dint of playing on other subjects like ZFS, I broke everything (proxmox also). And then yesterday I restarted the installation. Lychee worked the first time. Now as soon as I advance a little I make backups, clones and others
Beiträge von roboboard
-
-
Okay
I was playing around a bit, and found the solution that best fits my needs:
I created some ZFS datasets on Proxmox, and configured a network bridge (without briding ports - so like a "virtual network", in my case 192.168.1.0/28) between Proxmox and OMV (with VirtIO NIC). Then I created some NFS Shares on Proxmox and connected to them via RemoteMount Plugin in OMV. Speed is like native (the VirtIO Interface did incredible 35Gbs when I tested it with some iperf Benchmarks), and now I dont need and passthrough. Works like a charme for me
UP !
-
I've had this problem for 4 days. I am going to rest, the night brings counsel. Finally I doubt a little there
-
during the elapsed time i made the pid different and run 3 times with another user.
I still can't reach the lychee interface while on the lab instance it starts right away.
I am desperate.
-
Can you tell, what the problem is, you are experiencing
This is the Lychee log
Code
Alles anzeigen------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io ------------------------------------- To support LSIO projects visit: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 0 User gid: 0 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] 30-keygen: executing... using keys found in /config/keys [cont-init.d] 30-keygen: exited 0. [cont-init.d] 40-config: executing... Waiting for database connection... Waiting for database connection... Waiting for database connection... Waiting for database connection... mariadb (172.19.0.2:3306) open Nothing to migrate. [cont-finish.d] executing container finish scripts... [cont-finish.d] done. And this is Lychee Mariadb _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io ------------------------------------- To support LSIO projects visit: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 0 User gid: 0 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-config: executing... [cont-init.d] 30-config: exited 0. [cont-init.d] 40-initialise-db: executing... [cont-init.d] 40-initialise-db: exited 0. [cont-init.d] 90-custom-folders: executing... [cont-init.d] 90-custom-folders: exited 0. [cont-init.d] 99-custom-files: executing... [custom-init] no custom files found exiting... [cont-init.d] 99-custom-files: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. 220223 18:04:55 mysqld_safe Logging to '/config/databases/b1a9a93fa911.err'. 220223 18:04:55 mysqld_safe Starting mariadbd daemon with databases from /config/databases The last line is suspect
-
-
That log is normal on mDB.
If you post the yml that you're using, it will be easier to help.
Many thanks, this is lychee yml
Code
Alles anzeigenversion: "3" services: mariadb: image: ghcr.io/linuxserver/mariadb:latest container_name: lychee_mariadb restart: always volumes: - ./lychee/mariadb/data:/config environment: - MYSQL_ROOT_PASSWORD=gyliak66; - MYSQL_DATABASE=lychee - MYSQL_USER=lychee - MYSQL_PASSWORD=gyliak66 - PGID=0 - PUID=0 - TZ=Europe/Paris lychee: image: ghcr.io/linuxserver/lychee:latest container_name: lychee restart: always depends_on: - mariadb volumes: - ./lychee/config:/config - /DataNAS/pictures:/pictures environment: - DB_HOST=mariadb - DB_USERNAME=lychee - DB_PASSWORD=gyliak66 - DB_DATABASE=lychee - DB_PORT=3306 - PGID=0 - PUID=0 - TZ=Europe/Paris ports: - 84:80
-
I highly doubt the kernel is causing the problem here since it is a php app. I would stop worrying about which kernel you are running and look for other problems.
I just put the 2 omv 6 with the same kernel. The same version of docker. On one it works, on the other it doesn't. You are right the Kernel has nothing to do.
-
I just tried passing all the containers to stop. Still nothing better.
-
My knowledge does not allow me to understand, I try, but it is complicated.
I'm relying on research from other people in the case.
But I admit that I can't find it.
What I can note is starting from freshly installed omv 6 the problem is not present. I will try to stop all containers.
-
But why not run Lychee in docker
This is the problem with Mariadb
Code17:27:33 mysqld_safe Logging to '/config/databases/845953c262e3.err'. 17:27:33 mysqld_safe Starting mariadbd daemon with databases from /config/databases
lychee | -------------------------------------
lychee | _ ()
lychee | | | ___ _ __
lychee | | | / __| | | / \
lychee | | | \__ \ | | | () |
lychee | |_| |___/ |_| \__/
lychee |
lychee |
lychee | Brought to you by linuxserver.io
lychee | -------------------------------------
lychee |
lychee | To support LSIO projects visit:
lychee | https://www.linuxserver.io/donate/
lychee | -------------------------------------
lychee | GID/UID
lychee | -------------------------------------
lychee |
lychee | User uid: 0
lychee | User gid: 0
lychee | -------------------------------------
lychee |
lychee | [cont-init.d] 10-adduser: exited 0.
lychee | [cont-init.d] 20-config: executing...
lychee | [cont-init.d] 20-config: exited 0.
lychee | [cont-init.d] 30-keygen: executing...
lychee | using keys found in /config/keys
lychee | [cont-init.d] 30-keygen: exited 0.
lychee | [cont-init.d] 40-config: executing...
lychee | Waiting for database connection...
lychee | mariadb (172.19.0.2:3306) open
lychee |
lychee | Nothing to migrate.
-
Ok, I just understood what importing the pool is for.
That's if the pool was created on the command line, with import it mounts directly in the zfs plugin !
Than you (I'm stupid)
-
I have never exported anything with zfs. Did you try importing?
yes I clicked but nothing happens. I think there is a window opening at the speed of light. I don't have time to see anything.
-
I thought that in order to "import" you must first "exported"
I must not understand this function.
Maybe you can enlighten me ?
To extend HDDs to a pool, I note that the plugin has not yet arrived at therm.
Thank you very much for the work done!
-
I finally asked in the omv interface, to replace the kernel with that of proxmox.
Because I read ryecoaaron who said that it was better when using proxmox.
I will see this evening on site if I can install Lychee or not.
With Lychee there is a blocking problem on the database, which does not arise on an earlier kernel with omv 6.
I do not have the error message to give you on site (I will post later ).
But another person trying to change the kernel also lost Lychee with the same message I have.
It's not an error message actually, it gets stuck on one line and loops.
Sorry for Google Translation
-
Hello,
With the plugin on omv 6 there is no Export function, nor to Extend the pool.
How to do ?
Thank you
-
Install the kernel plugin, that will allow you to change to a different kernel
oupss... I notice that kernel 5.10 is not offered. There is 5.14 and 5.15 is the default. How to add 5.10 to the list ?
-
Many thanks !!!
-
Hello,
I am new to linux commands. I wanted to switch to kernel Linux 5.15.0-0.bpo.3-amd64 and I realize Lychee won't install.
There is a problem with the database. Photoprism works.
I read a person in my case but without any possible resolution.
On a test machine (VM omv 6) without having updated the kernel, Lychee works.
I then tell myself that it comes from the kernel and I would like to downgrade the kernel version but omv 6 does not allow it from the interface as omv 5 knows how to do, but I do not know the procedure to follow without destroying everything.
Can somebody help me please ?
Thank you
here is my infrastructure
- Proxmox > "VM" OMV 6.0.14-1 > Docker 5:20.10.12~3-0~debian-bullseye >